[PATCH linux dev-5.15 4/4] ARM: dts: aspeed: bletchley: update fusb302 nodes
Potin Lai
potin.lai.pt at gmail.com
Tue Jun 28 13:16:07 AEST 2022
1. Add interrupt pin of fusb302 on each sled.
2. Add vbus-supply property in each fusb302 node.
3. Fix BMC power-role at source and data-role at host.
4. Disable PD to avoid "HARD Reset" due to incompatible PD ver.
Signed-off-by: Potin Lai <potin.lai.pt at gmail.com>
---
.../dts/aspeed-bmc-facebook-bletchley.dts | 150 ++++++++++++------
1 file changed, 102 insertions(+), 48 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index 7b6de9b51547..9fdb3d17596b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -225,6 +225,60 @@
linux,code = <ASPEED_GPIO(H, 7)>;
};
};
+
+ vbus_sled1: vbus_sled1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_sled1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vbus_sled2: vbus_sled2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_sled2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vbus_sled3: vbus_sled3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_sled3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vbus_sled4: vbus_sled4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_sled4";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vbus_sled5: vbus_sled5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_sled5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vbus_sled6: vbus_sled6 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_sled6";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&mac2 {
@@ -336,17 +390,17 @@
compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vbus_sled1>;
+
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- data-role = "dual";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(3000, 12000, 3000)
- PDO_PPS_APDO(3000, 11000, 3000)>;
- op-sink-microwatt = <10000000>;
+ power-role = "source";
+ data-role = "host";
+ pd-disable;
+ typec-power-opmode = "default";
};
};
@@ -422,17 +476,17 @@
compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vbus_sled2>;
+
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- data-role = "dual";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(3000, 12000, 3000)
- PDO_PPS_APDO(3000, 11000, 3000)>;
- op-sink-microwatt = <10000000>;
+ power-role = "source";
+ data-role = "host";
+ pd-disable;
+ typec-power-opmode = "default";
};
};
@@ -508,17 +562,17 @@
compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vbus_sled3>;
+
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- data-role = "dual";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(3000, 12000, 3000)
- PDO_PPS_APDO(3000, 11000, 3000)>;
- op-sink-microwatt = <10000000>;
+ power-role = "source";
+ data-role = "host";
+ pd-disable;
+ typec-power-opmode = "default";
};
};
@@ -594,17 +648,17 @@
compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vbus_sled4>;
+
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- data-role = "dual";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(3000, 12000, 3000)
- PDO_PPS_APDO(3000, 11000, 3000)>;
- op-sink-microwatt = <10000000>;
+ power-role = "source";
+ data-role = "host";
+ pd-disable;
+ typec-power-opmode = "default";
};
};
@@ -680,17 +734,17 @@
compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vbus_sled5>;
+
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- data-role = "dual";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(3000, 12000, 3000)
- PDO_PPS_APDO(3000, 11000, 3000)>;
- op-sink-microwatt = <10000000>;
+ power-role = "source";
+ data-role = "host";
+ pd-disable;
+ typec-power-opmode = "default";
};
};
@@ -766,17 +820,17 @@
compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+ vbus-supply = <&vbus_sled6>;
+
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- data-role = "dual";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(3000, 12000, 3000)
- PDO_PPS_APDO(3000, 11000, 3000)>;
- op-sink-microwatt = <10000000>;
+ power-role = "source";
+ data-role = "host";
+ pd-disable;
+ typec-power-opmode = "default";
};
};
--
2.17.1
More information about the openbmc
mailing list