[PATCH v12 2/3] ARM: dts: nuvoton: Add memory controller node

[Borislav Petkov]

On Fri, Jun 10, 2022 at 04:43:39PM +0800, medadyoung at gmail.com wrote:
> From: Medad CChien <ctcchien at nuvoton.com>
> 
> ECC must be configured in the BootBlock header.
> Then, you can read error counts via the EDAC kernel framework.
> 
> Signed-off-by: Medad CChien <ctcchien at nuvoton.com>
> ---
>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index 3696980a3da1..ba542b26941e 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -106,6 +106,13 @@
>  		interrupt-parent = <&gic>;
>  		ranges;
>  
> +		mc: memory-controller at f0824000 {
> +			compatible = "nuvoton,npcm750-memory-controller";
> +			reg = <0x0 0xf0824000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
>  		rstc: rstc at f0801000 {
>  			compatible = "nuvoton,npcm750-reset";
>  			reg = <0xf0801000 0x70>;
> -- 

This one needs an Ack from DT folks.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette