[PATCH 20/34] iio: inkern: only relase the device node when done with it

Jonathan Cameron jic23 at kernel.org
Sun Jun 19 00:13:58 AEST 2022


On Mon, 13 Jun 2022 09:20:26 +0200
Nuno Sá <noname.nuno at gmail.com> wrote:

> On Sat, 2022-06-11 at 15:59 +0100, Jonathan Cameron wrote:
> > 
> > +Cc Mark Brown for a query on ordering in device tree based SPI
> > setup.
> > 
> > On Fri, 10 Jun 2022 22:08:41 +0200
> > Nuno Sá <noname.nuno at gmail.com> wrote:
> >   
> > > On Fri, 2022-06-10 at 16:56 +0200, Andy Shevchenko wrote:  
> > > > On Fri, Jun 10, 2022 at 10:48 AM Nuno Sá <nuno.sa at analog.com>
> > > > wrote:    
> > > > > 
> > > > > 'of_node_put()' can potentially release the memory pointed to
> > > > > by
> > > > > 'iiospec.np' which would leave us with an invalid pointer (and
> > > > > we
> > > > > would
> > > > > still pass it in 'of_xlate()'). As such, we can only release
> > > > > the
> > > > > node
> > > > > after we are done with it.    
> > > > 
> > > > The question you should answer in the commit message is the
> > > > following:
> > > > "Can an OF node, attached to a struct device, be gone before the
> > > > device itself?" If it so, then patch is good, otherwise there is
> > > > no
> > > > point in this patch in the first place.
> > > >     
> > > 
> > > Yeah, I might be wrong but from a quick look... yes, I think the
> > > node
> > > can be gone before the device. Take a look on the spi or i2c
> > > of_notify
> > > handling and you can see that the nodes are get/put on the
> > > add/remove
> > > notifcation. Meaning that the node lifespan is not really attached
> > > to
> > > the device lifespan. If it was, I would expect to see of_node_put()
> > > on
> > > the device release() function...  
> > 
> > I had a look at spi_of_notify() and indeed via
> > spi_unregister_device()
> > the node is put just before device_del() so I agree that at first
> > glance
> > it seems like there may be a race there against the useage here.
> > Mark (+CC) out of interest why are the node gets before the
> > device_add()
> > in spi_add_device() called from of_register_spi_device() but the
> > matching
> > node puts before the device_del() in spi_unregister_device()?
> > Seems like inconsistent ordering...
> > 
> > Which is not to say we shouldn't fix the IIO usage as this patch
> > does!
> >   
> 
> Just to add something that came to my attention. In the IIO case, it
> does not even matter if the parent device has the OF node lifetime
> "linked" to it (as it actually happens for platform devices). The
> reason is that iio_dev only has a weak reference to it's parent and (I
> think) the parent can actually go away while the iio_dev is still
> around (eg: someone has an open fd to the iio_dev cdev).
> 
> > > 
> > > Again, I might be wrong and I admit I was not sure about including
> > > this
> > > patch because it's a very unlikely scenario even though I think, in
> > > theory, a possible one.  
> > 
> > The patch is currently valid even if it's not a 'real' bug.
> > Given we are doing a put on that device_node, it makes sense for that
> > to occur after the local use has finished - we shouldn't be relying
> > on
> > what happens to be the case for lifetimes today.
> > 
> > Now, I did wonder if any drivers actually use it in their xlate
> > callbacks.
> > One does for an error print, so this is potentially real (if very
> > unlikely!)
> > 
> > This isn't a 'fix' I'd expect to rush in, or necessarily backport to
> > stable
> > but I think it's a valid fix.
> >   
> 
> Should I drop the fixes tag?
> 
Nope,  Tag still relevant and may be useful to someone down the
line!

Jonathan

> - Nuno Sá
> 
> 
> 
> 



More information about the openbmc mailing list