[PATCH v2 5/6] dt-bindings: net: Add NCSI bindings

[Jiaqing Zhao]

On 2022-06-11 07:19, Rob Herring wrote:
> On Sat, 11 Jun 2022 00:59:39 +0800, Jiaqing Zhao wrote:
>> Add devicetree bindings for NCSI VLAN modes. This allows VLAN mode to
>> be configured in devicetree.
>>
>> Signed-off-by: Jiaqing Zhao <jiaqing.zhao at linux.intel.com>
>> ---
>>  .../devicetree/bindings/net/ncsi.yaml         | 34 +++++++++++++++++++
>>  MAINTAINERS                                   |  2 ++
>>  include/dt-bindings/net/ncsi.h                | 15 ++++++++
>>  3 files changed, 51 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/net/ncsi.yaml
>>  create mode 100644 include/dt-bindings/net/ncsi.h
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/ncsi.yaml: 'oneOf' conditional failed, one must be fixed:
> 	'unevaluatedProperties' is a required property
> 	'additionalProperties' is a required property
> 	hint: Either unevaluatedProperties or additionalProperties must be present
> 	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/ncsi.yaml: ignoring, error in schema: 
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/ncsi.example.dtb: ethernet at 1e660000: 'ncsi,vlan-mode' does not match any of the regexes
> 	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/vendor-prefixes.yaml

I saw vendor-prefix.yaml says do not add non-vendor prefixes to the list. Since "ncsi" is not a vendor, may I ask what is the suggested replacement for 'ncsi,vlan-mode'? Will 'ncsi-vlan-mode' be fine?

> Documentation/devicetree/bindings/net/ncsi.example.dtb:0:0: /example-0/ethernet at 1e660000: failed to match any schema with compatible: ['aspeed,ast2600-mac', 'faraday,ftgmac100']
> Documentation/devicetree/bindings/net/ncsi.example.dtb:0:0: /example-0/ethernet at 1e660000: failed to match any schema with compatible: ['aspeed,ast2600-mac', 'faraday,ftgmac100']

The ftgmac100 it depends on uses a txt document instead of an yaml schema. And I see there is other schemas having the same error, can this be ignored?

And I've got one more question. The ncsi driver does not has its own compatible field, instead, it is enabled by setting the "use-ncsi" property of some specific mac drivers. Though currently only ftgmac100 supports ncsi in upstream kernel, it may be used by other mac drivers in the future. What do you think is a proper way for defining the ncsi schema? Having it in a separate yaml like this patch or add the properties to all the mac yamls that supports yaml? If the former way is preferred, how should the schema be defined without "compatible"?

> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/patch/
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
>