[PATCH v2 6/6] net/ncsi: Support VLAN mode configuration

[Jiaqing Zhao]

NCSI specification defines 4 VLAN modes, currently kernel NCSI driver
only supports the "VLAN + non-VLAN" mode (Mode #2), and there is no
way to detect which modes are supported by the device. This patch adds
support for configuring VLAN mode via the "ncsi,vlan-mode" devicetree
node.

Signed-off-by: Jiaqing Zhao <jiaqing.zhao at linux.intel.com>
---
 net/ncsi/internal.h    |  1 +
 net/ncsi/ncsi-manage.c | 41 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 35 insertions(+), 7 deletions(-)

diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 7f384f841019..6a988c898a8d 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -334,6 +334,7 @@ struct ncsi_dev_priv {
 	struct work_struct  work;            /* For channel management     */
 	struct packet_type  ptype;           /* NCSI packet Rx handler     */
 	struct list_head    node;            /* Form NCSI device list      */
+	u32                 vlan_mode;       /* VLAN mode                  */
 #define NCSI_MAX_VLAN_VIDS	15
 	struct list_head    vlan_vids;       /* List of active VLAN IDs */
 
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 3fb95f29e3e2..a398b0eb72b2 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -10,6 +10,7 @@
 #include <linux/skbuff.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <dt-bindings/net/ncsi.h>
 
 #include <net/ncsi.h>
 #include <net/net_namespace.h>
@@ -1042,7 +1043,11 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		nd->state = ncsi_dev_state_config_oem_gma;
 		break;
 	case ncsi_dev_state_config_oem_gma:
-		nd->state = ncsi_dev_state_config_clear_vids;
+		/* Only set up hardware VLAN filters in filtered mode */
+		if (ndp->vlan_mode == NCSI_VLAN_MODE_FILTERED)
+			nd->state = ncsi_dev_state_config_clear_vids;
+		else
+			nd->state = ncsi_dev_state_config_ev;
 		ret = -1;
 
 #if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
@@ -1094,11 +1099,15 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 			nd->state = ncsi_dev_state_config_svf;
 		/* Enable/Disable the VLAN filter */
 		} else if (nd->state == ncsi_dev_state_config_ev) {
-			if (list_empty(&ndp->vlan_vids)) {
-				nca.type = NCSI_PKT_CMD_DV;
-			} else {
+			if (ndp->vlan_mode == NCSI_VLAN_MODE_FILTERED &&
+			    !list_empty(&ndp->vlan_vids)) {
 				nca.type = NCSI_PKT_CMD_EV;
 				nca.bytes[3] = NCSI_CAP_VLAN_FILTERED;
+			} else if (ndp->vlan_mode == NCSI_VLAN_MODE_ANY) {
+				nca.type = NCSI_PKT_CMD_EV;
+				nca.bytes[3] = NCSI_CAP_VLAN_ANY;
+			} else {
+				nca.type = NCSI_PKT_CMD_DV;
 			}
 			nd->state = ncsi_dev_state_config_sma;
 		} else if (nd->state == ncsi_dev_state_config_sma) {
@@ -1800,15 +1809,33 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
 	ndp->ptype.dev = dev;
 	dev_add_pack(&ndp->ptype);
 
+	/* Set default VLAN mode (filtered) */
+	ndp->vlan_mode = NCSI_VLAN_MODE_FILTERED;
+
 	pdev = to_platform_device(dev->dev.parent);
 	if (pdev) {
 		np = pdev->dev.of_node;
-		if (np && of_get_property(np, "mlx,multi-host", NULL))
-			ndp->mlx_multi_host = true;
+		if (np) {
+			u32 vlan_mode;
+
+			if (!of_property_read_u32(np, "ncsi,vlan-mode", &vlan_mode)) {
+				if (vlan_mode > NCSI_VLAN_MODE_ANY ||
+				    vlan_mode == NCSI_VLAN_MODE_ONLY)
+					dev_warn(&pdev->dev, "NCSI: Unsupported VLAN mode %u",
+						 vlan_mode);
+				else
+					ndp->vlan_mode = vlan_mode;
+				dev_info(&pdev->dev, "NCSI: Configured VLAN mode %u",
+					 ndp->vlan_mode);
+			}
+			if (of_get_property(np, "mlx,multi-host", NULL))
+				ndp->mlx_multi_host = true;
+		}
 	}
 
 	/* Enable hardware VLAN filtering */
-	if (dev->netdev_ops->ndo_vlan_rx_add_vid == ncsi_vlan_rx_add_vid &&
+	if (ndp->vlan_mode == NCSI_VLAN_MODE_FILTERED &&
+	    dev->netdev_ops->ndo_vlan_rx_add_vid == ncsi_vlan_rx_add_vid &&
 	    dev->netdev_ops->ndo_vlan_rx_kill_vid == ncsi_vlan_rx_kill_vid)
 		dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
-- 
2.34.1