[PATCH 1/6] net/ncsi: Fix value of NCSI_CAP_VLAN_ANY

[Jiaqing Zhao]

According to the NCSI specification (DSP0222) [1], the value of allow
Any VLAN + non-VLAN mode in Enable VLAN command should be 0x03.

[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.0.0.pdf

Signed-off-by: Jiaqing Zhao <jiaqing.zhao at linux.intel.com>
---
 net/ncsi/internal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 03757e76bb6b..bc4a00e41695 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -47,7 +47,7 @@ enum {
 	NCSI_CAP_AEN_MASK                = 0x07,
 	NCSI_CAP_VLAN_ONLY               = 0x01, /* Filter VLAN packet only  */
 	NCSI_CAP_VLAN_NO                 = 0x02, /* Filter VLAN and non-VLAN */
-	NCSI_CAP_VLAN_ANY                = 0x04, /* Filter Any-and-non-VLAN  */
+	NCSI_CAP_VLAN_ANY                = 0x03, /* Filter Any-and-non-VLAN  */
 	NCSI_CAP_VLAN_MASK               = 0x07
 };
 
-- 
2.34.1