[PATCH] ARM: dts: aspeed: Add a palmetto board (AST2400)
Joel Stanley
joel at jms.id.au
Wed Jun 8 16:37:13 AEST 2022
On Wed, 8 Jun 2022 at 06:28, Cédric Le Goater <clg at kaod.org> wrote:
>
> Palmettos were the first OpenPOWER systems built by Tyan with the
> product name: GN70-BP010. They contained an IBM POWER8 Turismo SCM
> processor and an Aspeed AST2400 SoC.
Good idea.
>
> Cc: Joel Stanley <joel at jms.id.au>
> Signed-off-by: Cédric Le Goater <clg at kaod.org>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/ast2400-palmetto.dts | 102 +++++++++++++++++++++++++++++
> configs/ast2400-palmetto_defconfig | 74 +++++++++++++++++++++
> 3 files changed, 177 insertions(+)
> create mode 100644 arch/arm/dts/ast2400-palmetto.dts
> create mode 100644 configs/ast2400-palmetto_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 3515100c65ce..4faf29d747bd 100755
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -676,6 +676,7 @@ dtb-$(CONFIG_ARCH_BCM6858) += \
>
> dtb-$(CONFIG_ARCH_ASPEED) += \
> ast2400-evb.dtb \
> + ast2400-palmetto.dtb \
> ast2400-ahe-50dc.dtb \
> ast2500-evb.dtb \
> ast2600a0-evb.dtb \
> diff --git a/arch/arm/dts/ast2400-palmetto.dts b/arch/arm/dts/ast2400-palmetto.dts
> new file mode 100644
> index 000000000000..a512f602d2f1
> --- /dev/null
> +++ b/arch/arm/dts/ast2400-palmetto.dts
> @@ -0,0 +1,102 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "ast2400-u-boot.dtsi"
> +
> +/ {
> + model = "Palmetto BMC";
> + compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x40000000 0x10000000>;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + aliases {
> + spi0 = &fmc;
> + spi1 = &spi1;
> + ethernet0 = &mac0;
> + ethernet1 = &mac1;
They only had one ethernet connection.
> + };
> +};
> +
> +&uart5 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> +};
> +
> +&sdrammc {
> + clock-frequency = <200000000>;
> +};
> +
> +&wdt1 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> +};
> +
> +&wdt2 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> + phy-mode = "rgmii";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mac1link_default &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mac2link_default &pinctrl_mdio2_default>;
> +};
> +
> +
> +&fmc {
> + status = "okay";
> + flash at 0 {
> + compatible = "spi-flash", "sst,w25q256";
You just removed all of these :)
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <2>;
> + spi-rx-bus-width = <2>;
> + };
> +
> + flash at 1 {
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <2>;
> + spi-rx-bus-width = <2>;
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + flash at 0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> + compatible = "spi-flash", "sst,w25q256";
They only have one flash on each controller iirc.
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <2>;
> + spi-rx-bus-width = <2>;
> + };
> + flash at 1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1cs1_default>;
> + compatible = "spi-flash", "sst,w25q256";
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <2>;
> + spi-rx-bus-width = <2>;
> + };
> +};
> diff --git a/configs/ast2400-palmetto_defconfig b/configs/ast2400-palmetto_defconfig
> new file mode 100644
> index 000000000000..8802323b4db8
> --- /dev/null
> +++ b/configs/ast2400-palmetto_defconfig
Do we need a separate defconfig from the one for the evb? If not, can
we adjust the evb defconfig to suit?
Hopefully we can just build it with DEVICE_TREE=ast2400-palmetto and
an existing defconfig.
> @@ -0,0 +1,74 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ASPEED=y
> +CONFIG_SYS_TEXT_BASE=0x0
> +CONFIG_ASPEED_AST2400=y
> +CONFIG_SYS_MALLOC_F_LEN=0x800
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0xF0000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_FIT=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_BOOTCOMMAND="bootm 20080000"
> +CONFIG_PRE_CONSOLE_BUFFER=y
> +CONFIG_PRE_CON_BUF_ADDR=0x1e720000
> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_AUTO_COMPLETE is not set
> +CONFIG_SYS_PROMPT="ast# "
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_SYS_ALT_MEMTEST=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_DEFAULT_DEVICE_TREE="ast2400-palmetto"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_USE_ENV_SPI_BUS=y
> +CONFIG_ENV_SPI_BUS=0
> +CONFIG_USE_ENV_SPI_CS=y
> +CONFIG_ENV_SPI_CS=0
> +CONFIG_USE_ENV_SPI_MAX_HZ=y
> +CONFIG_ENV_SPI_MAX_HZ=100000000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_CLK=y
> +CONFIG_DM_GPIO=y
> +CONFIG_ASPEED_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_ASPEED=y
> +CONFIG_MISC=y
> +CONFIG_DM_MMC=y
> +# CONFIG_MMC_HW_PARTITIONING is not set
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ASPEED=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_PHY_NCSI=y
> +CONFIG_DM_ETH=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_FTGMAC100=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_RAM=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_SYSRESET=y
> +CONFIG_TIMER=y
> +CONFIG_WDT=y
> +CONFIG_DM_RESET=y
> +# CONFIG_CMD_BOOTEFI is not set
> +# CONFIG_EFI_LOADER is not set
> --
> 2.35.3
>
More information about the openbmc
mailing list