[PATCH] hwmon: (ucd9000) Add voltage monitor types

[Jim Wright]

On 6/7/2022 8:13 PM, Guenter Roeck wrote:
> 
> I don't think it makes sense to claim VOUT support if the chip is
> configured to monitor input voltages. This should probably be something
> like
> 
> ...
>  > +        case UCD9000_MON_VOLTAGE_AVS:
>  >               info->func[page] |= PMBUS_HAVE_VOUT
>  >                 | PMBUS_HAVE_STATUS_VOUT;
>  >               break;
>          case UCD9000_MON_INPUT_VOLTAGE:
>          case UCD9000_MON_INPUT_VOLTAGE_AVS:
>              info->func[page] |= PMBUS_HAVE_VIN;
>               break;
> 
> with appropriate mapping code to map the READ_VIN command for the
> affected pages to READ_VOUT. Question is if the limit registers on
> those pages are also reporting the limits using the vout limit
> commands; if so, those should be mapped as well.
> 
> Guenter

Hi Guenter,

Thank you for the review. I'll drop adding the input voltage types and 
resend the patch.

Jim Wright