[PATCH u-boot v2019.04-aspeed-openbmc v2 2/2] board: qualcomm: dc-scm-v1: add initial version of Qualcomm DC-SCM V1 board

[Joel Stanley]

On Fri, 8 Jul 2022 at 05:59, Jae Hyun Yoo <quic_jaehyoo at quicinc.com> wrote:
>
> On 7/7/2022 10:47 PM, Joel Stanley wrote:
> > On Thu, 7 Jul 2022 at 22:32, Jae Hyun Yoo <quic_jaehyoo at quicinc.com> wrote:
> >>
> >> Add initial version of Qualcomm DC-SCM V1 board. It has BMC_OK GPIO
> >> initialization code as an initial commit.
> >>
> >> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo at quicinc.com>
> >> ---
> >> Changes in v2:
> >> * Changed GPIO handling using GPIO driver. (Joel)
> >> * Moved board specific code to the manufacturer folder. (Joel)
> >>
> >>   arch/arm/mach-aspeed/ast2600/Kconfig |  8 ++++++
> >>   board/qualcomm/dc-scm-v1/Kconfig     | 15 ++++++++++
> >>   board/qualcomm/dc-scm-v1/Makefile    |  1 +
> >>   board/qualcomm/dc-scm-v1/dc-scm-v1.c | 42 ++++++++++++++++++++++++++++
> >>   4 files changed, 66 insertions(+)
> >>   create mode 100644 board/qualcomm/dc-scm-v1/Kconfig
> >>   create mode 100644 board/qualcomm/dc-scm-v1/Makefile
> >>   create mode 100644 board/qualcomm/dc-scm-v1/dc-scm-v1.c
> >>
> >> diff --git a/arch/arm/mach-aspeed/ast2600/Kconfig b/arch/arm/mach-aspeed/ast2600/Kconfig
> >> index 46cc1ad1dbd9..713bdf37d83f 100644
> >> --- a/arch/arm/mach-aspeed/ast2600/Kconfig
> >> +++ b/arch/arm/mach-aspeed/ast2600/Kconfig
> >> @@ -46,6 +46,13 @@ config TARGET_AST2600_INTEL
> >>            AST2600-INTEL is an Intel Eagle Stream CRB with
> >>            AST2600 as the BMC.
> >>
> >> +config TARGET_QUALCOMM_DC_SCM_V1
> >> +       bool "QUALCOMM-DC-SCM-V1"
> >> +       depends on ASPEED_AST2600
> >> +       help
> >> +         QUALCOMM-DC-SCM-V1 is a Qualcomm DC-SCM V1 board which is
> >> +         equipped with AST2600.
> >> +
> >>   endchoice
> >>
> >>   source "board/aspeed/evb_ast2600/Kconfig"
> >> @@ -53,5 +60,6 @@ source "board/aspeed/fpga_ast2600/Kconfig"
> >>   source "board/aspeed/slt_ast2600/Kconfig"
> >>   source "board/aspeed/ast2600_ibm/Kconfig"
> >>   source "board/aspeed/ast2600_intel/Kconfig"
> >> +source "board/qualcomm/dc-scm-v1/Kconfig"
> >>
> >>   endif
> >> diff --git a/board/qualcomm/dc-scm-v1/Kconfig b/board/qualcomm/dc-scm-v1/Kconfig
> >> new file mode 100644
> >> index 000000000000..57e311a20729
> >> --- /dev/null
> >> +++ b/board/qualcomm/dc-scm-v1/Kconfig
> >> @@ -0,0 +1,15 @@
> >> +if TARGET_QUALCOMM_DC_SCM_V1
> >> +
> >> +config SYS_BOARD
> >> +       default "dc-scm-v1"
> >> +
> >> +config SYS_VENDOR
> >> +       default "qualcomm"
> >> +
> >> +config SYS_SOC
> >> +       default "ast2600"
> >> +
> >> +config SYS_CONFIG_NAME
> >> +       default "evb_ast2600a1_spl"
> >> +
> >> +endif
> >> diff --git a/board/qualcomm/dc-scm-v1/Makefile b/board/qualcomm/dc-scm-v1/Makefile
> >> new file mode 100644
> >> index 000000000000..cb2aae7f9298
> >> --- /dev/null
> >> +++ b/board/qualcomm/dc-scm-v1/Makefile
> >> @@ -0,0 +1 @@
> >> +obj-y += dc-scm-v1.o
> >> diff --git a/board/qualcomm/dc-scm-v1/dc-scm-v1.c b/board/qualcomm/dc-scm-v1/dc-scm-v1.c
> >> new file mode 100644
> >> index 000000000000..4b81eac46bdf
> >> --- /dev/null
> >> +++ b/board/qualcomm/dc-scm-v1/dc-scm-v1.c
> >> @@ -0,0 +1,42 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> >> + */
> >> +
> >> +#include <common.h>
> >> +#include <asm/gpio.h>
> >> +
> >> +#define BMC_OK_GPIO "gpio at 1e780000171"
> >
> > Wow, is that how the u-boot driver works? That's eye watering!
> >
> >> +
> >> +static void gpio_init(void)
> >> +{
> >> +       struct gpio_desc desc;
> >> +       int ret;
> >> +
> >> +       ret = dm_gpio_lookup_name(BMC_OK_GPIO, &desc);
> >> +       if (ret)
> >> +               return;
> >> +       ret = dm_gpio_request(&desc, "bmc_ok");
> >> +       if (ret)
> >> +               return;
> >> +       ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT);
> >> +       if (ret)
> >> +               goto free_exit;
> >> +
> >> +       dm_gpio_set_value(&desc, 0);
> >
> > Given you just want to set the value, you could use a gpio hog. Sorry
> > for not mentioning it before, it only just occurred to me:
> >
> > +&gpio0 {
> > +       u-boot,dm-pre-reloc;
> > +
> > +       bmc_okay {
> > +               u-boot,dm-pre-reloc;
> > +               gpio-hog;
> > +               output-high;
> > +               gpios = <ASPEED_GPIO(V, 3) GPIO_ACTIVE_LOW>;
> > +       };
> > +};
> >
> > Then you don't need any code.
>
> Yes, this part can be changed like you suggested but this board specific
> code needs to be added since other implementations are also in the queue
> such as other gpio handling code, default fan speed setting, FRU
> parsing, MAC address setting and NC-SI fdt overriding so I want to add
> this set as is as an initial commit.

Okay. I'll merge this series and we can see how it evolves from there.

We should consider doing future development on the upstream list, and
backporting from there.

>
> Thanks,
> Jae
>
> >> +
> >> +free_exit:
> >> +       dm_gpio_free(desc.dev, &desc);
> >> +}
> >> +
> >> +int board_early_init_f(void)
> >> +{
> >> +       return 0;
> >> +}
> >> +
> >> +int board_late_init(void)
> >> +{
> >> +       gpio_init();
> >> +
> >> +       return 0;
> >> +}
> >> --
> >> 2.25.1
> >>