[PATCH u-boot v2019.04-aspeed-openbmc 1/3] configs: ast2600: add Qualcomm DC-SCM V1 defconfig

[Joel Stanley]

On Thu, 30 Jun 2022 at 20:02, Jae Hyun Yoo <quic_jaehyoo at quicinc.com> wrote:
>
> Add Qualcomm DC-SCM V1 defconfig which is equipped with AST2600.

In your commit message you need to justify why your board needs its
own defconfig.

Preferably we would use a generic openbmc defconfig and you select the
device tree for your board at build time.

>
> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo at quicinc.com>
> ---
>  configs/ast2600_qcom_dc_scm_v1_defconfig | 117 +++++++++++++++++++++++
>  1 file changed, 117 insertions(+)
>  create mode 100644 configs/ast2600_qcom_dc_scm_v1_defconfig
>
> diff --git a/configs/ast2600_qcom_dc_scm_v1_defconfig b/configs/ast2600_qcom_dc_scm_v1_defconfig
> new file mode 100644
> index 000000000000..353882deed26
> --- /dev/null
> +++ b/configs/ast2600_qcom_dc_scm_v1_defconfig
> @@ -0,0 +1,117 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_DCACHE_OFF=y
> +CONFIG_ARCH_ASPEED=y
> +CONFIG_SYS_TEXT_BASE=0x0
> +CONFIG_ASPEED_AST2600=y
> +CONFIG_TARGET_AST2600_QUALCOMM_DC_SCM_V1=y
> +CONFIG_SYS_MALLOC_F_LEN=0x800
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0xE0000
> +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_FIT=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_BOOTCOMMAND="bootm 20100000"
> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_ARCH_EARLY_INIT_R=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_AUTO_COMPLETE is not set
> +CONFIG_SYS_PROMPT="ast# "
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_BOOTEFI is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_NVEDIT_EFI is not set
> +CONFIG_CMD_CRC32=y
> +CONFIG_CRC32_VERIFY=y
> +# CONFIG_LOOPW is not set
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_MD5SUM_VERIFY=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMORY=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_SYS_ALT_MEMTEST=y
> +CONFIG_CMD_MX_CYCLIC=y
> +CONFIG_CMD_SHA1SUM=y
> +CONFIG_SHA1SUM_VERIFY=y
> +CONFIG_CMD_STRINGS=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PART=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_NCSI=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_EFI_PARTITION=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_USE_ENV_SPI_BUS=y
> +CONFIG_ENV_SPI_BUS=0
> +CONFIG_USE_ENV_SPI_CS=y
> +CONFIG_ENV_SPI_CS=0
> +CONFIG_USE_ENV_SPI_MAX_HZ=y
> +CONFIG_ENV_SPI_MAX_HZ=100000000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_DM_GPIO=y
> +CONFIG_ASPEED_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_ASPEED=y
> +CONFIG_MISC=y
> +CONFIG_ASPEED_AHBC=y
> +CONFIG_ASPEED_H2X=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ASPEED=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_PHY_BROADCOM=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_PHY_NCSI=y
> +CONFIG_DM_ETH=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_FTGMAC100=y
> +CONFIG_MDIO=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_PCIE_ASPEED=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_RAM=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_WDT=y
> +CONFIG_HEXDUMP=y
> +# CONFIG_GENERATE_SMBIOS_TABLE is not set
> --
> 2.25.1
>