[PATCH] ARM: dts: wpcm450: Enable watchdog by default

[Joel Stanley]

On Fri, 28 Jan 2022 at 22:11, Jonathan Neuschäfer <j.neuschaefer at gmx.net> wrote:
>
> The watchdog timer is always usable, regardless of board design, so
> there is no point in marking the watchdog device as disabled-by-default
> in nuvoton-wpcm450.dtsi.
>
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>

I assume this makes it always available for rebooting the system too?

Reviewed-by: Joel Stanley <joel at jms.id.au>

> ---
>  arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 4 ----
>  arch/arm/boot/dts/nuvoton-wpcm450.dtsi                      | 1 -
>  2 files changed, 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
> index 3ee61251a16d0..1ae7ae4804275 100644
> --- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
> +++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
> @@ -77,7 +77,3 @@ &serial1 {
>         /* "Serial over LAN" port. Connected to ttyS2 of the host system. */
>         status = "okay";
>  };
> -
> -&watchdog0 {
> -       status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
> index 93595850a4c3c..b9b669cd632f1 100644
> --- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
> @@ -81,7 +81,6 @@ watchdog0: watchdog at b800101c {
>                         interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
>                         reg = <0xb800101c 0x4>;
>                         clocks = <&clk24m>;
> -                       status = "disabled";
>                 };
>
>                 aic: interrupt-controller at b8002000 {
> --
> 2.34.1
>