[PATCH 2/2] dt-bindings: i2c: add nxp, pca9541 release-delay-us property

[Zev Weiss]

This property can be used to reduce arbitration overhead on busy i2c
busses by retaining ownership for a brief period in anticipation of
another transaction in the near future.

Signed-off-by: Zev Weiss <zev at bewilderbeest.net>
---
 Documentation/devicetree/bindings/i2c/nxp,pca9541.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
index 42bfc09c8918..c755da59d6ec 100644
--- a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
@@ -6,6 +6,14 @@ Required Properties:
 
   - reg: The I2C address of the device.
 
+Optional Properties:
+
+ - release-delay-us: the number of microseconds to delay before
+   releasing the bus after a transaction.  If unspecified the default
+   is zero (the bus is released immediately).  Non-zero values can
+   reduce arbitration overhead for back-to-back transactions, at the
+   cost of delaying the other master's access to the bus.
+
   The following required properties are defined externally:
 
   - I2C arbitration bus node. See i2c-arb.txt in this directory.
@@ -13,9 +21,11 @@ Required Properties:
 
 Example:
 
+	#include <dt-bindings/mux/mux.h>
 	i2c-arbitrator at 74 {
 		compatible = "nxp,pca9541";
 		reg = <0x74>;
+		release-delay-us = <20000>;
 
 		i2c-arb {
 			#address-cells = <1>;
-- 
2.34.1