[PATCH U-Boot v2019.04-aspeed-openbmc 4/6] gpio: Enable hogging support in SPL

[Eddie James]

Use the CONFIG macros to conditionally build the GPIO hogging support in
either the SPL or U-Boot, or both, depending on the configuration. Also
call the GPIO hog probe function in the common SPL board initialization
as an equivalent to adding it to the U-Boot init sequence functions.

Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
 common/spl/spl.c           |  7 +++++++
 drivers/gpio/Kconfig       | 10 ++++++++++
 drivers/gpio/gpio-uclass.c | 12 +++++++-----
 3 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/common/spl/spl.c b/common/spl/spl.c
index a1d4514fd3..bbb7578463 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -12,6 +12,9 @@
 #include <dm.h>
 #include <handoff.h>
 #include <spl.h>
+#if defined(CONFIG_SPL_GPIO_HOG)
+#include <asm/gpio.h>
+#endif
 #include <asm/sections.h>
 #include <asm/u-boot.h>
 #include <nand.h>
@@ -652,6 +655,10 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 	timer_init();
 #endif
 
+#if defined(CONFIG_SPL_GPIO_HOG)
+	gpio_hog_probe_all();
+#endif
+
 #if CONFIG_IS_ENABLED(BOARD_INIT)
 	spl_board_init();
 #endif
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a8dc16ca0e..8b8bf6822f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -24,6 +24,16 @@ config GPIO_HOG
 	  is a mechanism providing automatic GPIO request and config-
 	  uration as part of the gpio-controller's driver probe function.
 
+config SPL_GPIO_HOG
+	bool "Enable GPIO hog support in SPL"
+	depends on SPL_GPIO_SUPPORT
+	default n
+	help
+	  Enable gpio hog support
+	  The GPIO chip may contain GPIO hog definitions. GPIO hogging
+	  is a mechanism providing automatic GPIO request and config-
+	  uration as part of the gpio-controller's driver probe function.
+
 config ALTERA_PIO
 	bool "Altera PIO driver"
 	depends on DM_GPIO
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 01cfa2f788..219caa651b 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -144,7 +144,7 @@ static int gpio_find_and_xlate(struct gpio_desc *desc,
 		return gpio_xlate_offs_flags(desc->dev, desc, args);
 }
 
-#if defined(CONFIG_GPIO_HOG)
+#if CONFIG_IS_ENABLED(GPIO_HOG)
 
 struct gpio_hog_priv {
 	struct gpio_desc gpiod;
@@ -1033,9 +1033,6 @@ int gpio_dev_request_index(struct udevice *dev, const char *nodename,
 
 static int gpio_post_bind(struct udevice *dev)
 {
-	struct udevice *child;
-	ofnode node;
-
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	struct dm_gpio_ops *ops = (struct dm_gpio_ops *)device_get_ops(dev);
 	static int reloc_done;
@@ -1066,7 +1063,11 @@ static int gpio_post_bind(struct udevice *dev)
 	}
 #endif
 
-	if (IS_ENABLED(CONFIG_GPIO_HOG)) {
+#if CONFIG_IS_ENABLED(GPIO_HOG)
+	{
+		struct udevice *child;
+		ofnode node;
+
 		dev_for_each_subnode(node, dev) {
 			if (ofnode_read_bool(node, "gpio-hog")) {
 				const char *name = ofnode_get_name(node);
@@ -1081,6 +1082,7 @@ static int gpio_post_bind(struct udevice *dev)
 			}
 		}
 	}
+#endif
 	return 0;
 }
 
-- 
2.27.0