[PATCH v2 3/4] media: aspeed: Correct values for detected timing

Hans Verkuil hverkuil at xs4all.nl
Thu Jan 20 23:31:01 AEDT 2022


Hi Jammy,

I just want to double check this: I assume you have tested this with the
various polarity combinations?

I ask because I've never seen this before in any other hardware. The
sync and porch values reported by hardware are always independent from the
polarity, so that's why I am surprised to see this.

Same for the next patch (4/4).

Regards,

	Hans

On 12/22/21 09:21, Jammy Huang wrote:
> Correct timing's fp/sync/bp value based on the information below.
> It should be noticed that the calculation formula should be changed
> per sync polarity.
> 
> The sequence of signal: sync - backporch - video data - frontporch
> 
> The following registers start counting from sync's rising edge:
> 1. VR090: frame edge's left and right
> 2. VR094: frame edge's top and bottom
> 3. VR09C: counting from sync's rising edge to falling edge
> 
> [Vertical timing]
>             +--+     +-------------------+     +--+
>             |  |     |    v i d e o      |     |  |
>          +--+  +-----+                   +-----+  +---+
> 
>        vsync+--+
>    frame_top+--------+
> frame_bottom+----------------------------+
> 
>                   +-------------------+
>                   |    v i d e o      |
>       +--+  +-----+                   +-----+  +---+
>          |  |                               |  |
>          +--+                               +--+
>        vsync+-------------------------------+
>    frame_top+-----+
> frame_bottom+-------------------------+
> 
> [Horizontal timing]
>             +--+     +-------------------+     +--+
>             |  |     |    v i d e o      |     |  |
>          +--+  +-----+                   +-----+  +---+
> 
>        hsync+--+
>   frame_left+--------+
>  frame_right+----------------------------+
> 
>                   +-------------------+
>                   |    v i d e o      |
>       +--+  +-----+                   +-----+  +---+
>          |  |                               |  |
>          +--+                               +--+
>        hsync+-------------------------------+
>   frame_left+-----+
>  frame_right+-------------------------+
> 
> Signed-off-by: Jammy Huang <jammy_huang at aspeedtech.com>
> ---
>  v2:
>   - Code refined per Joel's suggestion
>   - Update commit message to have name matching variable
> ---
>  drivers/media/platform/aspeed-video.c | 30 ++++++++++++++++++++-------
>  1 file changed, 22 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index c241038ee27c..7c50567f5ab0 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -936,7 +936,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>  	u32 src_lr_edge;
>  	u32 src_tb_edge;
>  	u32 sync;
> -	u32 htotal;
> +	u32 htotal, vtotal, vsync, hsync;
>  	struct v4l2_bt_timings *det = &video->detected_timings;
>  
>  	det->width = MIN_WIDTH;
> @@ -983,21 +983,35 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>  		mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
>  		sync = aspeed_video_read(video, VE_SYNC_STATUS);
>  		htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
> +		vtotal = FIELD_GET(VE_MODE_DETECT_V_LINES, mds);
> +		vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
> +		hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
>  
>  		video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, src_tb_edge);
>  		video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, src_tb_edge);
> -		det->vfrontporch = video->frame_top;
> -		det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) -
> -			video->frame_bottom;
> -		det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
> +		if (det->polarities & V4L2_DV_VSYNC_POS_POL) {
> +			det->vbackporch = video->frame_top - vsync;
> +			det->vfrontporch = vtotal - video->frame_bottom;
> +			det->vsync = vsync;
> +		} else {
> +			det->vbackporch = video->frame_top;
> +			det->vfrontporch = vsync - video->frame_bottom;
> +			det->vsync = vtotal - vsync;
> +		}
>  		if (video->frame_top > video->frame_bottom)
>  			continue;
>  
>  		video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, src_lr_edge);
>  		video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, src_lr_edge);
> -		det->hfrontporch = video->frame_left;
> -		det->hbackporch = htotal - video->frame_right;
> -		det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
> +		if (det->polarities & V4L2_DV_HSYNC_POS_POL) {
> +			det->hbackporch = video->frame_left - hsync;
> +			det->hfrontporch = htotal - video->frame_right;
> +			det->hsync = hsync;
> +		} else {
> +			det->hbackporch = video->frame_left;
> +			det->hfrontporch = hsync - video->frame_right;
> +			det->hsync = htotal - hsync;
> +		}
>  		if (video->frame_left > video->frame_right)
>  			continue;
>  


More information about the openbmc mailing list