[PATCH linux dev-5.4 v1] hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flag
Lulu Su
Lulu_Su at wistron.com
Fri Jan 14 14:27:08 AEDT 2022
From: Eddie James <eajames at linux.ibm.com>
Some PMBus chips don't respond with valid data when reading the
CAPABILITY register. Add a flag that device drivers can set so
that the PMBus core driver doesn't use CAPABILITY to determine it's
behavior.
Signed-off-by: Eddie James <eajames at linux.ibm.com>
Link: https://lore.kernel.org/r/20201222152640.27749-2-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux at roeck-us.net>
(cherry picked from commit e5befc024cb4515d815662ed8746712cc5366bfc)
---
drivers/hwmon/pmbus/pmbus_core.c | 8 +++++---
include/linux/pmbus.h | 9 +++++++++
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index f7fc388..0f381558 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2156,9 +2156,11 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
}
/* Enable PEC if the controller supports it */
- ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
- if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
- client->flags |= I2C_CLIENT_PEC;
+ if (!(data->flags & PMBUS_NO_CAPABILITY)) {
+ ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
+ if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
+ client->flags |= I2C_CLIENT_PEC;
+ }
if (data->info->pages)
pmbus_clear_faults(client);
diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h
index 08468fc..74e1be0 100644
--- a/include/linux/pmbus.h
+++ b/include/linux/pmbus.h
@@ -25,6 +25,15 @@
*/
#define PMBUS_SKIP_STATUS_CHECK (1 << 0)
+/*
+ * PMBUS_NO_CAPABILITY
+ *
+ * Some PMBus chips don't respond with valid data when reading the CAPABILITY
+ * register. For such chips, this flag should be set so that the PMBus core
+ * driver doesn't use CAPABILITY to determine it's behavior.
+ */
+#define PMBUS_NO_CAPABILITY BIT(2)
+
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
--
2.7.4
---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
More information about the openbmc
mailing list