Propose a new application for reading DIMM SPD directly

[Zbigniew, Lukwinski]

On 2/11/2022 1:40 AM, Michael Shen wrote:
> On Thu, Feb 10, 2022 at 6:45 AM Ed Tanous <edtanous at google.com> wrote:
>> On Wed, Feb 9, 2022 at 1:14 PM Patrick Williams <patrick at stwcx.xyz> wrote:
>>> On Wed, Feb 09, 2022 at 12:20:00PM -0800, Ed Tanous wrote:
>>>> On Wed, Feb 9, 2022 at 11:56 AM Patrick Williams <patrick at stwcx.xyz> wrote:
>>>>> On Tue, Feb 08, 2022 at 04:23:12PM +0800, Michael Shen wrote:
>>>>>> On Tue, Feb 8, 2022 at 3:11 PM Patrick Williams <patrick at stwcx.xyz> wrote:
>>>>>>> On Tue, Feb 08, 2022 at 01:10:37PM +0800, Michael Shen wrote:
>>>>>> BIOS owns the MUX select pin and it can decide who owns the SPD(I2C/I3C) bus.
>>>>>>  From my understanding, BIOS only needs to read SPD during the POST stage.
>>>>>> For the rest of time, BIOS will hand over the SPD bus to BMC.
>>>>> That seems like it might work.  You'll have to deal with the time when the BIOS
>>>>> has the mux in the BMC code somehow.  Ideally I'd ask for the mux select to also
>>>>> be fed to the BMC as an input GPIO so that you can differentiate between "we
>>>>> don't own the mux" and "all the devices are NAKing us".
>>>> This seems like a nitty gritty design detail that's best handled in
>>>> code when we review it.  I think the important bit here is that there
>>>> are paths where this could work without a significant design issue.
>>> Just one subtlety.  I wouldn't expect this, necessarily, to be in _our_ design
>>> and/or code, except that we'd want to document the GPIO line like we do all
>>> others.  I was trying to hint that "if I were involved in this hardware design,
>>> I'd ask for...".  If you leave it out, I'm sure it'll work _most_ of the time
>>> just fine and it'll be your problem to debug it when it doesn't.
>> Understood.
> Thanks for all your suggestions. I will keep them in mind during implementation.

What about CLTT? Switching MUX to the BMC makes CPU not able to get DIMM 
temperature. Are you assuming here this feature is enabled in BMC FW?

Are you going to support DCPMM as well? If so, there is another problem 
since switching MUX to BMC you brakes NVDIMM related FW/SW running on 
Host OS.

>>>>> You should take a look at what is already existing in fru-device (part of
>>>>> entity-manager repository).  This is already doing this for IPMI-format EEPROM
>>>>> data.  We should be able to replicate/enhance this code, in the same repository,
>>>>> to handle SPD format.
>>>> I am not sure if it's a good idea to put it into the entity-manager
>>>> repo. As you said EM
>>>> is designed for IPMI-format EEPROM. Adding another parser into that
>>>> repo may violate
>>>> EM's design.
>>> I'm not sure why it would be an issue.  Hopefully one of the maintainers of that
>>> repo can weigh in.  I wouldn't expect "parsing only IPMI-format EEPROMs" is a
>>> design but just the current state of implementation.
>> So long as it can function properly in its current design, i have no
>> problem with FruDevice adding more parsing types.  In fact, there's
>> already patchsets out to add Linkedins proprietary fru type to
>> FruDevice, so in terms of design, Patricks request seems reasonable.
> Got it. Then I will push the code to EM.