[u-boot,v2019.04-aspeed-openbmc v2 1/1] arm: dts: Aspeed: add Bletchley dts

[Joel Stanley]

On Mon, 7 Feb 2022 at 16:08, Potin Lai <potin.lai at quantatw.com> wrote:
>
> Initial introduction of Bletchley equipped with
> Aspeed 2600 BMC SoC.
>
> Signed-off-by: Potin Lai <potin.lai at quantatw.com>
>
> ---
>
> change v1 -> v2:
> * sort Makefile alphabetically
> * add licence and copyright
> * update model name
> * remove the nodes not using (fsi, emmc, sdhci, ehci, pcie & display_port)
> ---
>  arch/arm/dts/Makefile              |   9 +-
>  arch/arm/dts/ast2600-bletchley.dts | 223 +++++++++++++++++++++++++++++
>  2 files changed, 228 insertions(+), 4 deletions(-)
>  create mode 100644 arch/arm/dts/ast2600-bletchley.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index df844065cd..ac93a89c07 100755
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -677,15 +677,16 @@ dtb-$(CONFIG_ARCH_BCM6858) += \
>  dtb-$(CONFIG_ARCH_ASPEED) += \
>         ast2400-evb.dtb \
>         ast2500-evb.dtb \
> -       ast2600-evb.dtb \
> -       ast2600-ncsi.dtb \
>         ast2600a0-evb.dtb \
>         ast2600a1-evb.dtb \
> +       ast2600-bletchley.dtb \
> +       ast2600-evb.dtb \
>         ast2600-fpga.dtb \
> +       ast2600-intel.dtb \
> +       ast2600-ncsi.dtb \
>         ast2600-rainier.dtb \
>         ast2600-slt.dtb \
> -       ast2600-tacoma.dtb \
> -       ast2600-intel.dtb
> +       ast2600-tacoma.dtb
>
>  dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
>
> diff --git a/arch/arm/dts/ast2600-bletchley.dts b/arch/arm/dts/ast2600-bletchley.dts
> new file mode 100644
> index 0000000000..2417c95f00
> --- /dev/null
> +++ b/arch/arm/dts/ast2600-bletchley.dts
> @@ -0,0 +1,223 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2022 Meta Platforms Inc.
> +/dts-v1/;
> +
> +#include "ast2600-u-boot.dtsi"
> +
> +/ {
> +        model = "AST2600 Bletchley";
> +        compatible = "aspeed,ast2600-bletchley", "aspeed,ast2600";

Aspeed don't make this, do they?

Take a look at the other examples (or your device tree in the kernel,
which you should base this one on):

        model = "Facebook Bletchley BMC";
        compatible = "facebook,bletchley-bmc", "aspeed,ast2600"

I suggest ignoring the company rename to keep things simple, but I'll
leave that to you.

The rest looks good. Thanks!

> +
> +       memory {
> +               device_type = "memory";
> +               reg = <0x80000000 0x40000000>;
> +       };
> +
> +       chosen {
> +               stdout-path = &uart5;
> +       };
> +
> +       aliases {
> +               mmc0 = &emmc_slot0;
> +               mmc1 = &sdhci_slot0;
> +               mmc2 = &sdhci_slot1;
> +               spi0 = &fmc;
> +               spi1 = &spi1;
> +               spi2 = &spi2;
> +               ethernet0 = &mac0;
> +               ethernet1 = &mac1;
> +               ethernet2 = &mac2;
> +               ethernet3 = &mac3;
> +       };
> +
> +       cpus {
> +               cpu at 0 {
> +                       clock-frequency = <800000000>;
> +               };
> +               cpu at 1 {
> +                       clock-frequency = <800000000>;
> +               };
> +       };
> +};
> +
> +&uart5 {
> +       u-boot,dm-pre-reloc;
> +       status = "okay";
> +};
> +
> +&sdrammc {
> +       clock-frequency = <400000000>;
> +};
> +
> +&wdt1 {
> +       status = "okay";
> +};
> +
> +&wdt2 {
> +       status = "okay";
> +};
> +
> +&wdt3 {
> +       status = "okay";
> +};
> +
> +&mdio {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_mdio4_default>;
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +};
> +
> +&mac2 {
> +       status = "okay";
> +       phy-mode = "rgmii";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rgmii3_default &pinctrl_mac3link_default>;
> +       fixed-link {
> +               speed = <1000>;
> +               full-duplex;
> +       };
> +};
> +
> +&fmc {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_fmcquad_default>;
> +
> +       flash at 0 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <2>;
> +               spi-rx-bus-width = <2>;
> +       };
> +
> +       flash at 1 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <2>;
> +               spi-rx-bus-width = <2>;
> +       };
> +
> +       flash at 2 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <2>;
> +               spi-rx-bus-width = <2>;
> +       };
> +};
> +
> +&spi1 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
> +                       &pinctrl_spi1cs1_default &pinctrl_spi1wp_default
> +                       &pinctrl_spi1wp_default &pinctrl_spi1quad_default>;
> +
> +       flash at 0 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <4>;
> +               spi-rx-bus-width = <4>;
> +       };
> +
> +       flash at 1 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <4>;
> +               spi-rx-bus-width = <4>;
> +       };
> +};
> +
> +&spi2 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
> +                       &pinctrl_spi2cs2_default &pinctrl_spi2quad_default>;
> +
> +       flash at 0 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <4>;
> +               spi-rx-bus-width = <4>;
> +       };
> +
> +       flash at 1 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <4>;
> +               spi-rx-bus-width = <4>;
> +       };
> +
> +       flash at 2 {
> +               compatible = "spi-flash", "sst,w25q256";
> +               status = "okay";
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <4>;
> +               spi-rx-bus-width = <4>;
> +       };
> +};
> +
> +&i2c4 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c5_default>;
> +};
> +
> +&i2c5 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c6_default>;
> +};
> +
> +&i2c6 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c7_default>;
> +};
> +
> +&i2c7 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c8_default>;
> +};
> +
> +&i2c8 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c9_default>;
> +};
> +
> +&scu {
> +       mac0-clk-delay = <0x10 0x0a
> +                         0x10 0x10
> +                         0x10 0x10>;
> +       mac1-clk-delay = <0x10 0x0a
> +                         0x10 0x10
> +                         0x10 0x10>;
> +       mac2-clk-delay = <0x08 0x04
> +                         0x08 0x04
> +                         0x08 0x04>;
> +       mac3-clk-delay = <0x08 0x04
> +                         0x08 0x04
> +                         0x08 0x04>;
> +};
> +
> +&hace {
> +       status = "okay";
> +};
> --
> 2.17.1
>