[PATCH v1 6/6] i2c: npcm: Support NPCM845

[Avi Fishman]

On Tue, Feb 8, 2022 at 11:22 AM Tali Perry <tali.perry1 at gmail.com> wrote:
>
> >On 08/02/2022 09:51, Tali Perry wrote:
> >>> On 08/02/2022 08:14, Tali Perry wrote:
> >>>>> Subject: Re: [PATCH v1 6/6] i2c: npcm: Support NPCM845
> >>>>>
> >>>>> On 07/02/2022 13:00, Jonathan Neuschäfer wrote:
> >>>>>> Hello,
> >>>>>>
> >>>>>> On Mon, Feb 07, 2022 at 02:33:38PM +0800, Tyrone Ting wrote:
> >>>>>>> From: Tyrone Ting <kfting at nuvoton.com>
> >>>>>>>
> >>>>>>> NPCM8XX uses a similar i2c module as NPCM7XX.
> >>>>>>> The only difference is that the internal HW FIFO is larger.
> >>>>>>>
> >>>>>>> Related Makefile and Kconfig files are modified to support as well.
> >>>>>>>
> >>>>>>> Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller
> >>>>>>> driver")
> >>>>>>
> >>>>>> It's not really a bug fix, but rather an additional feature.
> >>>>>> Therefore, I suggest removing the Fixes tag from this patch.
> >>>>>>
> >>>>>>> Signed-off-by: Tyrone Ting <kfting at nuvoton.com>
> >>>>>>> Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
> >>>>>>> ---
> >>>>>> [...]
> >>>>>>>  /* init register and default value required to enable module */
> >>>>>>>  #define NPCM_I2CSEGCTL 0xE4
> >>>>>>> +#ifdef CONFIG_ARCH_NPCM7XX
> >>>>>>>  #define NPCM_I2CSEGCTL_INIT_VAL 0x0333F000
> >>>>>>> +#else
> >>>>>>> +#define NPCM_I2CSEGCTL_INIT_VAL 0x9333F000
> >>>>>>> +#endif
> >>>>>>
> >>>>>> This is going to cause problems when someone tries to compile a kernel
> >>>>>> that runs on both NPCM7xx and NPCM8xx (because the driver will then
> >>>>>> only work on NPCM7xx).
> >>>>>
> >>>>> Yes, good catch.
> >>>>>
> >>>>> The NPCM7XX is multiplatform, I guess NPCM8xx will be as well, so this looks like an invalid code. How such code is supposed to work on multiplatform kernel?
> >>>>>
> >>>>
> >>>> NPCM7xx and NPCM8xx are very different devices.
> >>>> They share same driver sources for some of the modules but it's not ABI.
> >>>> Users cannot compile a single kernel with two separate DTS.
> >>>> In case of the i2c controller, the npcm7xx has a 16 byte HW FIFO,
> >>>> and the NPCM8xx has 32 bytes HW FIFO.
> >>>> This also means that registers fields are slightly different.
> >>>> For init data we can move it to the DTS, but register field sizes
> >>>> can't be handled with this approach.
> >>>>
> >>>
> >>> What do you mean they cannot compile a kernel with different DTS? Of
> >>> course they can - when we talk about multiplatform sub-architectures!
> >>> Maybe there is something specific in NPCMxxx which stops it but then it
> >>> should not be marked multiplatform.
> >>>
> >>
> >>
> >> NCPM7xx is ARM32 bit (dual core Cortex A9)
> >> NPCM8xx is ARM64 bit (quad core Cortex A35)
> >>
> >> They have completely different architecture so not ABI compliant.
> >> I2C module is similar, but the devices are quite different and have
> >> separate architectures.
> >
> >OK, in such case usually you indeed can't have both. :)
> >
> >> Sorry for the confusion.
> >> This is the first patch we try to upstream for NPCM8xx.
> >> In the coming weeks we will upstream the architecture of NPCM8xx as well.
> >
> >Still, ARCH_XXX should not be hard-coded in the drivers to change the
> >driver's behavior, even if driver won't be used simultaneously. It
> >breaks all design principles and prevents any further re-use if a new
> >use case appears.
> >
> >You can use "ifdef ARCH_XXX" to skip building of some parts of the
> >driver, but it's not the case here.
> >
>
> Correct, the main change is in FIFO size:
> +#ifdef CONFIG_ARCH_NPCM7XX
> #define I2C_HW_FIFO_SIZE               16
> +#else
> +#define I2C_HW_FIFO_SIZE               32
> +#endif /* CONFIG_ARCH_NPCM7XX */
>
> NPCM7XX will always have 16 bytes, all the next gens will have 32.
>
> This impact some registers sizes, like this one:
>
> +#ifdef CONFIG_ARCH_NPCM7XX
> #define NPCM_I2CRXF_STS_RX_BYTES       GENMASK(4, 0)
> +#else
> +#define NPCM_I2CRXF_STS_RX_BYTES       GENMASK(5, 0)
> +#endif /*CONFIG_ARCH_NPCM7XX*/
>
> For this, the FIFO size should be defined before compilation.
> I also don't want to let users select FIFO size per architecture.
> NPCM7XX has 16, NPCM8XX has 32. This is not a user selection.
> It's part of the arch.

Will this be a better approach to add in the Kconfig file a legacy mode:
config I2C_NPCM_VER_89
      bool "support legacy i2c version 0x89 of npcm"
      depends on ARCH_NPCM7XX
      default y
      help
        This limits the support to legacy i2c version 0x89 of npcm
        Will be only 16 bytes fifo and will not include other new features

config I2C_NPCM
      tristate "Nuvoton I2C Controller"
      depends on ARCH_NPCM || COMPILE_TEST
      select I2C_NPCM_VER_89 if ARCH_NPCM7XX
      help
        If you say yes to this option, support will be included for the
        Nuvoton I2C controller, which is available on the NPCM BMC
        controllers.
        Driver can also support slave mode (select I2C_SLAVE).

and in the code replace:
#ifdef CONFIG_ARCH_NPCM7XX
with
#ifdef CONFIG_I2C_NPCM_VER_89

>
>
>
> >
> >Best regards,
> >Krzysztof
>
> Thanks,
> Tali



-- 
Regards,
Avi