[PATCH 2/2] pinctrl: aspeed: Allow monitoring of power control input GPIOs

[Bills, Jason M]

The pass-through input GPIOs cannot be monitored because when
requested, pass-through is disabled which causes a change on the
pass-through output.

The SIO GPIOs cannot be monitored because when requested, the
request is rejected based on the value of the ACPI strap.

This change removes the register check condition from the pass-
through and desired SIO GPIOs so they can be requested and
monitored from power control.

Tested:
For pass-through, I used gpioset to hold a request on the input
GPIOs and confirmed that pass-through remained enabled.

For SIO, I used gpioget to confirm that I can successfully request
and read the GPIO value.

Signed-off-by: Jason M. Bills <jason.m.bills at linux.intel.com>
---
  drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 10 +++++-----
  drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 10 +++++-----
  2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c 
b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 6ab3473cbba6..69a05a03dd63 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -279,7 +279,7 @@ FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, 
G18, C21);

  #define B20 32
  SIG_EXPR_LIST_DECL_SINGLE(B20, NCTS3, NCTS3, SIG_DESC_SET(SCU80, 16));
-SIG_EXPR_DECL_SINGLE(GPIE0IN, GPIE0, GPIE0_DESC);
+SIG_EXPR_DECL_SINGLE(GPIE0IN, GPIE0);
  SIG_EXPR_DECL_SINGLE(GPIE0IN, GPIE, GPIE_DESC);
  SIG_EXPR_LIST_DECL_DUAL(B20, GPIE0IN, GPIE0, GPIE);
  PIN_DECL_2(B20, GPIOE0, NCTS3, GPIE0IN);
@@ -299,7 +299,7 @@ FUNC_GROUP_DECL(GPIE0, B20, C20);

  #define F18 34
  SIG_EXPR_LIST_DECL_SINGLE(F18, NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
-SIG_EXPR_DECL_SINGLE(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL_SINGLE(GPIE2IN, GPIE2);
  SIG_EXPR_DECL_SINGLE(GPIE2IN, GPIE, GPIE_DESC);
  SIG_EXPR_LIST_DECL_DUAL(F18, GPIE2IN, GPIE2, GPIE);
  PIN_DECL_2(F18, GPIOE2, NDSR3, GPIE2IN);
@@ -1412,7 +1412,7 @@ FUNC_GROUP_DECL(ADC15, H4);

  #define R22 192
  SIG_EXPR_DECL_SINGLE(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
-SIG_EXPR_DECL_SINGLE(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_DECL_SINGLE(SIOS3, ACPI);
  SIG_EXPR_LIST_DECL_DUAL(R22, SIOS3, SIOS3, ACPI);
  SIG_EXPR_LIST_DECL_SINGLE(R22, DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
  PIN_DECL_2(R22, GPIOY0, SIOS3, DASHR22);
@@ -1420,7 +1420,7 @@ FUNC_GROUP_DECL(SIOS3, R22);

  #define R21 193
  SIG_EXPR_DECL_SINGLE(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
-SIG_EXPR_DECL_SINGLE(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_DECL_SINGLE(SIOS5, ACPI);
  SIG_EXPR_LIST_DECL_DUAL(R21, SIOS5, SIOS5, ACPI);
  SIG_EXPR_LIST_DECL_SINGLE(R21, DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
  PIN_DECL_2(R21, GPIOY1, SIOS5, DASHR21);
@@ -1436,7 +1436,7 @@ FUNC_GROUP_DECL(SIOPWREQ, P22);

  #define P21 195
  SIG_EXPR_DECL_SINGLE(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
-SIG_EXPR_DECL_SINGLE(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_DECL_SINGLE(SIOONCTRL, ACPI);
  SIG_EXPR_LIST_DECL_DUAL(P21, SIOONCTRL, SIOONCTRL, ACPI);
  SIG_EXPR_LIST_DECL_SINGLE(P21, DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
  PIN_DECL_2(P21, GPIOY3, SIOONCTRL, DASHP21);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c 
b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index ffc72168ef7b..458b84b223c4 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -776,7 +776,7 @@ SSSF_PIN_DECL(AC23, GPIOO7, PWM7, 
SIG_DESC_SET(SCU41C, 23));

  #define AB22 120
  SIG_EXPR_LIST_DECL_SEMG(AB22, PWM8, PWM8G1, PWM8, SIG_DESC_SET(SCU41C, 
24));
-SIG_EXPR_LIST_DECL_SESG(AB22, THRUIN0, THRU0, SIG_DESC_SET(SCU4BC, 24));
+SIG_EXPR_LIST_DECL_SESG(AB22, THRUIN0, THRU0);
  PIN_DECL_2(AB22, GPIOP0, PWM8, THRUIN0);
  GROUP_DECL(PWM8G1, AB22);
  FUNC_DECL_2(PWM8, PWM8G0, PWM8G1);
@@ -793,7 +793,7 @@ FUNC_DECL_2(PWM9, PWM9G0, PWM9G1);

  #define AA23 122
  SIG_EXPR_LIST_DECL_SEMG(AA23, PWM10, PWM10G1, PWM10, 
SIG_DESC_SET(SCU41C, 26));
-SIG_EXPR_LIST_DECL_SESG(AA23, THRUIN1, THRU1, SIG_DESC_SET(SCU4BC, 26));
+SIG_EXPR_LIST_DECL_SESG(AA23, THRUIN1, THRU1);
  PIN_DECL_2(AA23, GPIOP2, PWM10, THRUIN1);
  GROUP_DECL(PWM10G1, AA23);
  FUNC_DECL_2(PWM10, PWM10G0, PWM10G1);
@@ -1086,16 +1086,16 @@ FUNC_GROUP_DECL(GPIU7, AC17);
  FUNC_GROUP_DECL(ADC15, AC17);

  #define AB15 168
-SSSF_PIN_DECL(AB15, GPIOV0, SIOS3, SIG_DESC_SET(SCU434, 8));
+SSSF_PIN_DECL(AB15, GPIOV0, SIOS3);

  #define AF14 169
-SSSF_PIN_DECL(AF14, GPIOV1, SIOS5, SIG_DESC_SET(SCU434, 9));
+SSSF_PIN_DECL(AF14, GPIOV1, SIOS5);

  #define AD14 170
  SSSF_PIN_DECL(AD14, GPIOV2, SIOPWREQ, SIG_DESC_SET(SCU434, 10));

  #define AC15 171
-SSSF_PIN_DECL(AC15, GPIOV3, SIOONCTRL, SIG_DESC_SET(SCU434, 11));
+SSSF_PIN_DECL(AC15, GPIOV3, SIOONCTRL);

  #define AE15 172
  SSSF_PIN_DECL(AE15, GPIOV4, SIOPWRGD, SIG_DESC_SET(SCU434, 12));
-- 
2.25.1