Changing ethernet port speed

[Hamid Amirrad]

Hi,

I am trying to change the Ethernet port speed from 10Mbps to 1Gbps, but I
can't find a way to do that. Can you please point me in the right direction?

Thanks,
Hamid


ast# version
U-Boot 2016.07 (Jun 10 2020 - 10:12:49 +0000)
arm-openbmc-linux-gnueabi-gcc (GCC) 11.2.0
GNU ld (GNU Binutils) 2.37.20210721

ast# printenv
SN=8513060012
baudrate=115200
bootargs=console=ttyS4,115200n8 root=/dev/ram rw
bootcmd=bootm 20080000
bootdelay=2
ethact=FTGMAC100#0
ethaddr=00:02:C5:38:1D:DF
ethaddr1=00:02:C5:38:1D:E0
ipaddr=172.16.141.104
spi_dma=yes
stderr=serial
stdin=serial
stdout=serial
verify=yes

ast# ping 172.16.141.1
FTGMAC100#0: link up, *10Mbps half-duplex*
Using FTGMAC100#0 device

ARP Retry count exceeded; starting again
ping failed; host 172.16.141.1 is not alive
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20221201/e2e9c42a/attachment.htm>