[PATCH v13 2/3] dt-bindings: edac: nuvoton: Add document for NPCM memory controller

[Marvin Lin]

Add dt-bindings document for Nuvoton NPCM memory controller.

Signed-off-by: Marvin Lin <milkfafa at gmail.com>
---
 .../edac/nuvoton,npcm-memory-controller.yaml  | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/edac/nuvoton,npcm-memory-controller.yaml

diff --git a/Documentation/devicetree/bindings/edac/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/edac/nuvoton,npcm-memory-controller.yaml
new file mode 100644
index 000000000000..d5ef7e7a65f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/nuvoton,npcm-memory-controller.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/nuvoton,npcm-memory-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Memory Controller Device Tree Bindings
+
+maintainers:
+  - Marvin Lin <kflin at nuvoton.com>
+  - Stanley Chu <yschu at nuvoton.com>
+
+description: |
+  The Nuvoton BMC SoC supports DDR4 memory with and without ECC (error
+  correction check).
+
+  The memory controller supports single bit error correction, double bit
+  error detection (in-line ECC in which a section (1/8th) of the memory
+  device used to store data is used for ECC storage).
+
+  Note, the bootloader must configure ECC mode for the memory controller.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-memory-controller
+      - nuvoton,npcm845-memory-controller
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ahb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        mc: memory-controller at f0824000 {
+            compatible = "nuvoton,npcm750-memory-controller";
+            reg = <0xf0824000 0x1000>;
+            interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
-- 
2.17.1