[PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller

Joel Stanley joel at jms.id.au
Tue Apr 26 18:35:43 AEST 2022


On Mon, 25 Apr 2022 at 07:59, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 22/04/2022 20:30, Jonathan Neuschäfer wrote:
> > The Nuvoton WPCM450 SoC has a combined clock and reset controller.
> > Add a devicetree binding for it, as well as definitions for the bit
> > numbers used by it.
> >
> > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
> > ---
>
> Thank you for your patch. There is something to discuss/improve.
>
> >  .../bindings/clock/nuvoton,wpcm450-clk.yaml   | 74 +++++++++++++++++++
> >  .../dt-bindings/clock/nuvoton,wpcm450-clk.h   | 67 +++++++++++++++++
> >  2 files changed, 141 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> >  create mode 100644 include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> > new file mode 100644
> > index 0000000000000..0fffa8a68dee4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> > @@ -0,0 +1,74 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/nuvoton,wpcm450-clk.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Nuvoton WPCM450 clock controller binding
>
> s/binding//
>
> > +
> > +maintainers:
> > +  - Jonathan Neuschäfer <j.neuschaefer at gmx.net>
> > +
> > +description:
> > +  This binding describes the clock controller of the Nuvoton WPCM450 SoC, which
> > +  supplies clocks and resets to the rest of the chip.
>
> s/This binding describes//
>
> Just describe the hardware.
>
> > +
> > +properties:
> > +  compatible:
> > +    const: nuvoton,wpcm450-clk
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Reference clock oscillator (should be 48 MHz)
> > +
> > +  clock-names:
> > +    items:
> > +      - const: refclk
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +  '#reset-cells':
> > +    const: 1
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - '#clock-cells'
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    refclk: clock-48mhz {
> > +      /* 48 MHz reference oscillator */
> > +      compatible = "fixed-clock";
> > +      clock-output-names = "refclk";
> > +      clock-frequency = <48000000>;
> > +      #clock-cells = <0>;
> > +    };
> > +
> > +    clk: clock-controller at b0000200 {
> > +      reg = <0xb0000200 0x100>;
> > +      compatible = "nuvoton,wpcm450-clk";
> > +      clocks = <&refclk>;
> > +      clock-names = "refclk";
> > +      #clock-cells = <1>;
> > +      #reset-cells = <1>;
> > +    };
> > +
> > +    serial at b8000000 {
> > +      compatible = "nuvoton,wpcm450-uart";
> > +      reg = <0xb8000000 0x20>;
> > +      reg-shift = <2>;
> > +      interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
> > +      clocks = <&clk WPCM450_CLK_UART0>;
> > +    };
>
> Skip the consumer example, it's obvious/trivial/duplicating.
>
> > diff --git a/include/dt-bindings/clock/nuvoton,wpcm450-clk.h b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> > new file mode 100644
> > index 0000000000000..86e1c895921b7
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> > @@ -0,0 +1,67 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
> > +#define _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
> > +
> > +/* Clocks based on CLKEN bits */
> > +#define WPCM450_CLK_FIU            0
> > +#define WPCM450_CLK_XBUS           1
> > +#define WPCM450_CLK_KCS            2
> > +#define WPCM450_CLK_SHM            4
> > +#define WPCM450_CLK_USB1           5
> > +#define WPCM450_CLK_EMC0           6
> > +#define WPCM450_CLK_EMC1           7
> > +#define WPCM450_CLK_USB0           8
> > +#define WPCM450_CLK_PECI           9
> > +#define WPCM450_CLK_AES           10
> > +#define WPCM450_CLK_UART0         11
> > +#define WPCM450_CLK_UART1         12
> > +#define WPCM450_CLK_SMB2          13
> > +#define WPCM450_CLK_SMB3          14
> > +#define WPCM450_CLK_SMB4          15
> > +#define WPCM450_CLK_SMB5          16
> > +#define WPCM450_CLK_HUART         17
> > +#define WPCM450_CLK_PWM           18
> > +#define WPCM450_CLK_TIMER0        19
> > +#define WPCM450_CLK_TIMER1        20
> > +#define WPCM450_CLK_TIMER2        21
> > +#define WPCM450_CLK_TIMER3        22
> > +#define WPCM450_CLK_TIMER4        23
> > +#define WPCM450_CLK_MFT0          24
> > +#define WPCM450_CLK_MFT1          25
> > +#define WPCM450_CLK_WDT           26
> > +#define WPCM450_CLK_ADC           27
> > +#define WPCM450_CLK_SDIO          28
> > +#define WPCM450_CLK_SSPI          29
> > +#define WPCM450_CLK_SMB0          30
> > +#define WPCM450_CLK_SMB1          31
> > +
> > +/* Other clocks */
> > +#define WPCM450_CLK_USBPHY        32
> > +
> > +#define WPCM450_NUM_CLKS          33
> > +
> > +/* Resets based on IPSRST bits */
>
> All these defines should be in second header in dt-bindings/reset/...

I disagree. It makes more sense to keep the definitions together, and
it's all for the same hardware and driver.

>
> > +#define WPCM450_RESET_FIU          0
>
>
> Best regards,
> Krzysztof


More information about the openbmc mailing list