Hi all
I add the sensor in entity-manager config like below
{
"Index": 2,
"Name": "MB_VMEM",
"PowerState": "On",
"ScaleFactor": 1,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 1.32
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 1.26
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 1.14
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 1.08
}
],
"Type": "ADC"
},
{
"Index": 3,
"Name": "MB_P12V",
"PowerState": "On",
"ScaleFactor": 0.23,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 13.23
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 12.6
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 11.4
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 10.77
}
],
"Type": "ADC"
},
{
"Index": 4,
"Name": "MB_P5V",
"PowerState": "On",
"ScaleFactor": 0.55,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 5.48
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 5.24
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 4.76
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 4.48
}
],
"Type": "ADC"
},
{
"Index": 5,
"Name": "MB_P5V_SB",
"PowerState": "On",
"ScaleFactor": 0.25,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 5.48
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 5.24
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 4.76
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 4.48
}
],
"Type": "ADC"
},
I use the busctrl command to see MB_P5V_SB information, it is normal.
root at fws7830bmc:~# busctl introspect --no-pager xyz.openbmc_project.EntityManager /xyz/openbmc_project/inventory/system/board/FWS7830_
Baseboard/MB_P5V
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
org.freedesktop.DBus.Introspectable interface - - -
.Introspect method - s -
org.freedesktop.DBus.Peer interface - - -
.GetMachineId method - s -
.Ping method - - -
org.freedesktop.DBus.Properties interface - - -
.Get method ss v -
.GetAll method s a{sv} -
.Set method ssv - -
.PropertiesChanged signal sa{sv}as - -
xyz.openbmc_project.Configuration.ADC interface - - -
.Index property t 4 emits-change
.Name property s "MB_P5V" emits-change
.PowerState property s "On" emits-change
.ScaleFactor property d 0.55 emits-change
.Type property s "ADC" emits-change
xyz.openbmc_project.Configuration.ADC.Thresholds0 interface - - -
.Delete method - - -
.Direction property s "greater than" emits-change writable
.Name property s "upper critical" emits-change writable
.Severity property d 1 emits-change writable
.Value property d 5.48 emits-change writable
xyz.openbmc_project.Configuration.ADC.Thresholds1 interface - - -
.Delete method - - -
.Direction property s "greater than" emits-change writable
.Name property s "upper non critical" emits-change writable
.Severity property d 0 emits-change writable
.Value property d 5.24 emits-change writable
xyz.openbmc_project.Configuration.ADC.Thresholds2 interface - - -
.Delete method - - -
.Direction property s "less than" emits-change writable
.Name property s "lower non critical" emits-change writable
.Severity property d 0 emits-change writable
.Value property d 4.76 emits-change writable
xyz.openbmc_project.Configuration.ADC.Thresholds3 interface - - -
.Delete method - - -
.Direction property s "less than" emits-change writable
.Name property s "lower critical" emits-change writable
.Severity property d 1 emits-change writable
.Value property d 4.48 emits-change writable
But I use "ipmitoo sensor” command, it return the error information below as
MB P3V3 | 3.271 | Volts | ok | na | 2.947 | 3.046 | 3.511 | 3.596 | na
MB P5V | 2.982 | Volts | ok | na | 2.662 | 2.829 | 3.123 | 3.264 | na
MB P5V SB | 5.048 | Volts | ok | na | 4.484 | 4.766 | 5.245 | 5.471 | na
MB P12V | 7.215 | Volts | ok | na | 6.386 | 6.723 | 7.429 | 7.829 | na
Please give me some advise.
Many thanks
Paul
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20210930/7c8c5280/attachment-0001.htm>