[PATCH v6 1/4] dt-bindings: mfd: aspeed-lpc: Convert to YAML schema
ChiaWei Wang
chiawei_wang at aspeedtech.com
Mon Sep 27 11:16:52 AEST 2021
Hi Rob,
> From: Rob Herring <robh+dt at kernel.org>
> Sent: Wednesday, September 22, 2021 9:15 PM
>
> On Wed, Sep 22, 2021 at 2:32 AM Chia-Wei Wang
> <chiawei_wang at aspeedtech.com> wrote:
> >
> > Convert the bindings of Aspeed LPC from text file into YAML schema.
> >
> > Signed-off-by: Chia-Wei Wang <chiawei_wang at aspeedtech.com>
> > ---
> > .../devicetree/bindings/mfd/aspeed-lpc.txt | 157 ---------------
> > .../devicetree/bindings/mfd/aspeed-lpc.yaml | 187
> ++++++++++++++++++
> > 2 files changed, 187 insertions(+), 157 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> > create mode 100644
> > Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
>
> This has lots of warnings with 'make dtbs_check':
>
> /builds/robherring/linux-dt-review/arch/arm/boot/dts/aspeed-ast2500-evb.dt.y
> aml:
> lpc at 1e789000: 'ibt at 140', 'kcs at 114', 'kcs at 24', 'kcs at 28', 'kcs at 2c', 'lhc at a0',
> 'reg-io-width' do not match any of the regexes:
> '^lpc-ctrl@[0-9a-f]+$', '^lpc-snoop@[0-9a-f]+$', '^reset-controller@[0-9a-f]+$',
> 'pinctrl-[0-9]+'
> From schema:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/as
> peed-lpc.yaml
>
> Is 'reg-io-width' valid?
I think that 'reg-io-width' can be removed along with this YAML conversion.
The LPC drivers does not refer to this property (Andrew, correct me if I missed something).
>
> You can quiet all the child nodes with:
>
> additionalProperties:
> type: object
>
> (They will still warn about undocumented compatibles, so we don't lose any
> todo list).
Thanks!
I will add this and run the checks for the v7 revision.
Regards,
Chiawei
>
>
> > diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> > b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> > new file mode 100644
> > index 000000000000..9c66795a1fb6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> > @@ -0,0 +1,187 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # #
> > +Copyright (c) 2021 Aspeed Tehchnology Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Aspeed Low Pin Count (LPC) Bus Controller
> > +
> > +maintainers:
> > + - Andrew Jeffery <andrew at aj.id.au>
> > + - Chia-Wei Wang <chiawei_wang at aspeedtech.com>
> > +
> > +description:
>
> You need '|' to preserve paragraphs.
>
> > + The LPC bus is a means to bridge a host CPU to a number of
> > + low-bandwidth peripheral devices, replacing the use of the ISA bus
> > + in the age of PCI[0]. The primary use case of the Aspeed LPC
> > + controller is as a slave on the bus (typically in a Baseboard
> > + Management Controller SoC), but under certain conditions it can also
> take the role of bus master.
> > +
> > + The LPC controller is represented as a multi-function device to
> > + account for the mix of functionality, which includes, but is not
> > + limited to
> > +
> > + * An IPMI Block Transfer[2] Controller
> > +
> > + * An LPC Host Interface Controller manages functions exposed to the host
> such
> > + as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping,
> UART
> > + management and bus snoop configuration.
> > +
> > + * A set of SuperIO[3] scratch registers enableing implementation of e.g.
> custom
> > + hardware management protocols for handover between the host and
> baseboard
> > + management controller.
> > +
> > + Additionally the state of the LPC controller influences the pinmux
> > + configuration, therefore the host portion of the controller is
> > + exposed as a syscon as a means to arbitrate access.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - aspeed,ast2400-lpc-v2
> > + - aspeed,ast2500-lpc-v2
> > + - aspeed,ast2600-lpc-v2
> > + - const: simple-mfd
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 1
> > +
> > + ranges: true
> > +
> > +patternProperties:
> > + "^lpc-ctrl@[0-9a-f]+$":
> > + type: object
> > +
> > + description:
> > + The LPC Host Interface Controller manages functions exposed to the
> host such as
> > + LPC firmware hub cycles, configuration of the LPC-to-AHB mapping,
> UART management
> > + and bus snoop configuration.
> > +
> > + properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - aspeed,ast2400-lpc-ctrl
> > + - aspeed,ast2500-lpc-ctrl
> > + - aspeed,ast2600-lpc-ctrl
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + memory-region:
> > + $ref: /schemas/types.yaml#/definitions/phandle
>
> Already has a type. Needs how many entries (maxItems: 1).
>
> > + description: A reserved_memory region to be used for the LPC
> > + to AHB mapping
> > +
> > + flash:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: The SPI flash controller containing the flash to
> > + be exposed over the LPC to AHB mapping
> > +
> > + required:
> > + - compatible
> > + - clocks
> > +
> > + "^reset-controller@[0-9a-f]+$":
> > + type: object
> > +
> > + description:
> > + The UARTs present in the ASPEED SoC can have their resets tied to
> the reset
> > + state of the LPC bus. Some systems may chose to modify this
> > + configuration
> > +
> > + properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - aspeed,ast2400-lpc-reset
> > + - aspeed,ast2500-lpc-reset
> > + - aspeed,ast2600-lpc-reset
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + required:
> > + - compatible
> > +
> > + "^lpc-snoop@[0-9a-f]+$":
> > + type: object
> > +
> > + description:
> > + The LPC snoop interface allows the BMC to listen on and record the
> data
> > + bytes written by the Host to the targeted LPC I/O pots.
> > +
> > + properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - aspeed,ast2400-lpc-snoop
> > + - aspeed,ast2500-lpc-snoop
> > + - aspeed,ast2600-lpc-snoop
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + snoop-ports:
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + description: The LPC I/O ports to snoop
> > +
> > + required:
> > + - compatible
> > + - interrupts
> > + - snoop-ports
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - "#address-cells"
> > + - "#size-cells"
> > + - ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/ast2600-clock.h>
> > +
> > + lpc: lpc at 1e789000 {
> > + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
> > + reg = <0x1e789000 0x1000>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0x1e789000 0x1000>;
> > +
> > + lpc_ctrl: lpc-ctrl at 80 {
> > + compatible = "aspeed,ast2600-lpc-ctrl";
> > + reg = <0x80 0x80>;
> > + clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
> > + memory-region = <&flash_memory>;
> > + flash = <&spi>;
> > + };
> > +
> > + lpc_reset: reset-controller at 98 {
> > + compatible = "aspeed,ast2600-lpc-reset";
> > + reg = <0x98 0x4>;
> > + #reset-cells = <1>;
> > + };
> > +
> > + lpc_snoop: lpc-snoop at 90 {
> > + compatible = "aspeed,ast2600-lpc-snoop";
> > + reg = <0x90 0x8>;
> > + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> > + snoop-ports = <0x80>;
> > + };
> > + };
> > --
> > 2.17.1
> >
More information about the openbmc
mailing list