[PATCH linux dev-5.10 v2 4/4] ARM: dts: aspeed: Rainier: Remove gpio hog for GPIOP7

[Eddie James]

Only the pass 1 Ingraham board (Rainier system) had a micro-controller
wired to GPIOP7 on ball Y23. Pass 2 boards have this ball wired to the
heartbeat LED, so remove the hog and add it to the pass 1 devicetrees.

Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts | 9 +++++++++
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-p1.dts    | 9 +++++++++
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts       | 7 -------
 3 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts
index e35a3efd9d22..b7ec83848750 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts
@@ -22,6 +22,15 @@ aliases {
 	};
 };
 
+&gpio0 {
+	pin_mclr_vpp {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
+		output-high;
+		line-name = "mclr_vpp";
+	};
+};
+
 &i2c4 {
 	/delete-node/ pca9546 at 70;
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-p1.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-p1.dts
index b3c923f1838b..d650dbebe5d2 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-p1.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-p1.dts
@@ -22,6 +22,15 @@ aliases {
 	};
 };
 
+&gpio0 {
+	pin_mclr_vpp {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
+		output-high;
+		line-name = "mclr_vpp";
+	};
+};
+
 &i2c4 {
 	/delete-node/ pca9546 at 70;
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 2b6bb20dfd82..9250d9465407 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -254,13 +254,6 @@ &gpio0 {
 	/*Y0-Y7*/	"","","","","","","","",
 	/*Z0-Z7*/	"","","","","","","","";
 
-	pin_mclr_vpp {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
-		output-high;
-		line-name = "mclr_vpp";
-	};
-
 	i2c3_mux_oe_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
-- 
2.27.0