[RFC PATCH] ARM: aspeed: Add secure boot controller support

[Ryan Chen]

> -----Original Message-----
> From: joel.stan at gmail.com <joel.stan at gmail.com> On Behalf Of Joel Stanley
> Sent: Tuesday, October 19, 2021 4:06 PM
> To: Andrew Jeffery <andrew at aj.id.u>; openbmc at lists.ozlabs.org
> Cc: Ryan Chen <ryan_chen at aspeedtech.com>
> Subject: [RFC PATCH] ARM: aspeed: Add secure boot controller support
> 
> This reads out the status of the secure boot controller and exposes it in sysfs.
> 
> An example on a AST2600A3 QEmu model:
> 
>  # grep . /sys/bus/soc/devices/soc0/*
>  /sys/bus/soc/devices/soc0/abr_image:0
>  /sys/bus/soc/devices/soc0/family:AST2600
>  /sys/bus/soc/devices/soc0/low_security_key:0
>  /sys/bus/soc/devices/soc0/machine:Rainier 2U
>  /sys/bus/soc/devices/soc0/otp_protected:0
>  /sys/bus/soc/devices/soc0/revision:A3
>  /sys/bus/soc/devices/soc0/secure_boot:1
>  /sys/bus/soc/devices/soc0/serial_number:888844441234abcd
>  /sys/bus/soc/devices/soc0/soc_id:05030303
>  /sys/bus/soc/devices/soc0/uart_boot:1
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
>  arch/arm/boot/dts/aspeed-g6.dtsi    |  5 ++
>  drivers/soc/aspeed/aspeed-socinfo.c | 71 +++++++++++++++++++++++++++++
>  2 files changed, 76 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> b/arch/arm/boot/dts/aspeed-g6.dtsi
> index ee171b3364fa..8f947ed47fc5 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -384,6 +384,11 @@ adc1: adc at 1e6e9100 {
>  				status = "disabled";
>  			};
> 
> +			sbc: secure-boot-controller at 1e6f2000 {
> +				compatible = "aspeed,ast2600-sbc";
> +				reg = <0x1e6f2000 0x1000>;
> +			};
> +
>  			gpio0: gpio at 1e780000 {
>  				#gpio-cells = <2>;
>  				gpio-controller;
> diff --git a/drivers/soc/aspeed/aspeed-socinfo.c
> b/drivers/soc/aspeed/aspeed-socinfo.c
> index 1ca140356a08..6fa0c891f3cb 100644
> --- a/drivers/soc/aspeed/aspeed-socinfo.c
> +++ b/drivers/soc/aspeed/aspeed-socinfo.c
> @@ -9,6 +9,8 @@
>  #include <linux/slab.h>
>  #include <linux/sys_soc.h>
> 
> +static u32 security_status;
> +
>  static struct {
>  	const char *name;
>  	const u32 id;
> @@ -74,6 +76,54 @@ static const char *siliconid_to_rev(u32 siliconid)
>  	return "??";
>  }
> 
> +#define SEC_STATUS		0x14
> +#define ABR_IMAGE_SOURCE	BIT(13)
> +#define OTP_PROTECTED		BIT(8)
> +#define LOW_SEC_KEY		BIT(7)
> +#define SECURE_BOOT		BIT(6)
> +#define UART_BOOT		BIT(5)
> +
> +static ssize_t abr_image_show(struct device *dev, struct
> +device_attribute *attr, char *buf) {
> +	return sprintf(buf, "%d\n", !!(security_status & ABR_IMAGE_SOURCE)); }
> +static DEVICE_ATTR_RO(abr_image);
> +
> +static ssize_t low_security_key_show(struct device *dev, struct
> +device_attribute *attr, char *buf) {
> +	return sprintf(buf, "%d\n", !!(security_status & LOW_SEC_KEY)); }
> +static DEVICE_ATTR_RO(low_security_key);
> +
> +static ssize_t otp_protected_show(struct device *dev, struct
> +device_attribute *attr, char *buf) {
> +	return sprintf(buf, "%d\n", !!(security_status & OTP_PROTECTED)); }
> +static DEVICE_ATTR_RO(otp_protected);
> +
> +static ssize_t secure_boot_show(struct device *dev, struct
> +device_attribute *attr, char *buf) {
> +	return sprintf(buf, "%d\n", !!(security_status & SECURE_BOOT)); }
> +static DEVICE_ATTR_RO(secure_boot);
> +
> +static ssize_t uart_boot_show(struct device *dev, struct
> +device_attribute *attr, char *buf) {
> +	/* Invert the bit, as 1 is boot from SPI/eMMC */
> +	return sprintf(buf, "%d\n", !(security_status & UART_BOOT)); } static
> +DEVICE_ATTR_RO(uart_boot);
> +
> +static struct attribute *aspeed_attrs[] = {
> +	&dev_attr_abr_image.attr,
> +	&dev_attr_low_security_key.attr,
> +	&dev_attr_otp_protected.attr,
> +	&dev_attr_secure_boot.attr,
> +	&dev_attr_uart_boot.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(aspeed);
> +
>  static int __init aspeed_socinfo_init(void)  {
>  	struct soc_device_attribute *attrs;
> @@ -81,6 +131,7 @@ static int __init aspeed_socinfo_init(void)
>  	struct device_node *np;
>  	void __iomem *reg;
>  	bool has_chipid = false;
> +	bool has_sbe = false;
>  	u32 siliconid;
>  	u32 chipid[2];
>  	const char *machine = NULL;
> @@ -109,6 +160,20 @@ static int __init aspeed_socinfo_init(void)
>  	}
>  	of_node_put(np);
> 
> +	/* AST2600 only */
> +	np = of_find_compatible_node(NULL, NULL, "aspeed,ast2600-sbc");
> +	if (of_device_is_available(np)) {
> +		void *base = of_iomap(np, 0);
> +		if (!base) {
> +			of_node_put(np);
> +			return -ENODEV;
> +		}
> +		security_status = readl(base + SEC_STATUS);
> +		has_sbe = true;
> +		iounmap(base);
> +		of_node_put(np);
> +	}
> +
>  	attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
>  	if (!attrs)
>  		return -ENODEV;
> @@ -135,6 +200,9 @@ static int __init aspeed_socinfo_init(void)
>  		attrs->serial_number = kasprintf(GFP_KERNEL, "%08x%08x",
>  						 chipid[1], chipid[0]);
> 
> +	if (has_sbe)
> +		attrs->custom_attr_group = aspeed_groups[0];
> +
>  	soc_dev = soc_device_register(attrs);
>  	if (IS_ERR(soc_dev)) {
>  		kfree(attrs->soc_id);
> @@ -148,6 +216,9 @@ static int __init aspeed_socinfo_init(void)
>  			attrs->revision,
>  			attrs->soc_id);
> 
> +	if (has_sbe && (security_status & SECURE_BOOT))
> +		pr_info("AST2600 secure boot enabled\n");
> +
>  	return 0;
>  }
>  early_initcall(aspeed_socinfo_init);
> --
> 2.33.0