[PATCH v2 2/7] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log

Jammy Huang jammy_huang at aspeedtech.com
Wed Oct 20 19:08:56 AEDT 2021


Dear Paul,

On 2021/10/18 下午 05:58, Paul Menzel wrote:
> Dear Jammy,
>
>
> Am 18.10.21 um 11:22 schrieb Jammy Huang:
>> The debug log level, 0~3, is controlled by module_param, debug.
>> Higher the value, more the information.
> Nit: *The* higher …
>
> Please mention your “conversion heuristic”? For example, level 3 is for
> register operations (read, update, write)? Maybe that could also be
> added to the module parameter description.

OK, it will be updated as below:

     The debug log level, 0~3, is controlled by module_param, debug.
     The higher the value, the more the information.
       0: off
       1: info
       2: debug
       3: register operations

>
>
> Kind regards,
>
> Paul
>
>
>> Signed-off-by: Jammy Huang <jammy_huang at aspeedtech.com>
>> ---
>>    drivers/media/platform/aspeed-video.c | 40 +++++++++++++++------------
>>    1 file changed, 23 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> index 6259cf17a7cc..642ca96c8c52 100644
>> --- a/drivers/media/platform/aspeed-video.c
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -30,6 +30,7 @@
>>    #include <media/v4l2-event.h>
>>    #include <media/v4l2-ioctl.h>
>>    #include <media/videobuf2-dma-contig.h>
>> +#include <linux/videodev2.h>
>>    
>>    #define DEVICE_NAME			"aspeed-video"
>>    
>> @@ -390,6 +391,8 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
>>    	},
>>    };
>>    
>> +static unsigned int debug;
>> +
>>    static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
>>    {
>>    	int i;
>> @@ -437,23 +440,23 @@ static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
>>    	t &= ~clear;
>>    	t |= bits;
>>    	writel(t, video->base + reg);
>> -	dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
>> -		readl(video->base + reg));
>> +	v4l2_dbg(3, debug, &video->v4l2_dev, "update %03x[%08x -> %08x]\n",
>> +		 reg, before, readl(video->base + reg));
>>    }
>>    
>>    static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
>>    {
>>    	u32 t = readl(video->base + reg);
>>    
>> -	dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
>> +	v4l2_dbg(3, debug, &video->v4l2_dev, "read %03x[%08x]\n", reg, t);
>>    	return t;
>>    }
>>    
>>    static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
>>    {
>>    	writel(val, video->base + reg);
>> -	dev_dbg(video->dev, "write %03x[%08x]\n", reg,
>> -		readl(video->base + reg));
>> +	v4l2_dbg(3, debug, &video->v4l2_dev, "write %03x[%08x]\n", reg,
>> +		 readl(video->base + reg));
>>    }
>>    
>>    static void update_perf(struct aspeed_video_perf *p)
>> @@ -474,13 +477,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
>>    	u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
>>    
>>    	if (video->v4l2_input_status) {
>> -		dev_dbg(video->dev, "No signal; don't start frame\n");
>> +		v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n");
>>    		return 0;
>>    	}
>>    
>>    	if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
>>    	    !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
>> -		dev_dbg(video->dev, "Engine busy; don't start frame\n");
>> +		v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n");
>>    		return -EBUSY;
>>    	}
>>    
>> @@ -489,7 +492,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
>>    				       struct aspeed_video_buffer, link);
>>    	if (!buf) {
>>    		spin_unlock_irqrestore(&video->lock, flags);
>> -		dev_dbg(video->dev, "No buffers; don't start frame\n");
>> +		v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n");
>>    		return -EPROTO;
>>    	}
>>    
>> @@ -565,7 +568,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
>>    
>>    static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
>>    {
>> -	dev_dbg(video->dev, "Resolution changed; resetting\n");
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "Resolution changed; resetting\n");
>>    
>>    	set_bit(VIDEO_RES_CHANGE, &video->flags);
>>    	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
>> @@ -766,8 +769,8 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
>>    	aspeed_video_write(video, VE_STREAM_BUF_SIZE,
>>    			   compression_buffer_size_reg);
>>    
>> -	dev_dbg(video->dev, "Max compressed size: %x\n",
>> -		video->max_compressed_size);
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "Max compressed size: %#x\n",
>> +		 video->max_compressed_size);
>>    }
>>    
>>    #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
>> @@ -804,7 +807,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>>    						      res_check(video),
>>    						      MODE_DETECT_TIMEOUT);
>>    		if (!rc) {
>> -			dev_dbg(video->dev, "Timed out; first mode detect\n");
>> +			v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n");
>>    			clear_bit(VIDEO_RES_DETECT, &video->flags);
>>    			return;
>>    		}
>> @@ -822,7 +825,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>>    						      MODE_DETECT_TIMEOUT);
>>    		clear_bit(VIDEO_RES_DETECT, &video->flags);
>>    		if (!rc) {
>> -			dev_dbg(video->dev, "Timed out; second mode detect\n");
>> +			v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n");
>>    			return;
>>    		}
>>    
>> @@ -856,7 +859,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>>    	} while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
>>    
>>    	if (invalid_resolution) {
>> -		dev_dbg(video->dev, "Invalid resolution detected\n");
>> +		v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n");
>>    		return;
>>    	}
>>    
>> @@ -873,8 +876,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>>    	aspeed_video_update(video, VE_SEQ_CTRL, 0,
>>    			    VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
>>    
>> -	dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
>> -		det->height);
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
>> +		 det->width, det->height);
>>    }
>>    
>>    static void aspeed_video_set_resolution(struct aspeed_video *video)
>> @@ -1501,7 +1504,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
>>    				!test_bit(VIDEO_FRAME_INPRG, &video->flags),
>>    				STOP_TIMEOUT);
>>    	if (!rc) {
>> -		dev_dbg(video->dev, "Timed out when stopping streaming\n");
>> +		v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n");
>>    
>>    		/*
>>    		 * Need to force stop any DMA and try and get HW into a good
>> @@ -1856,6 +1859,9 @@ static struct platform_driver aspeed_video_driver = {
>>    
>>    module_platform_driver(aspeed_video_driver);
>>    
>> +module_param(debug, int, 0644);
>> +MODULE_PARM_DESC(debug, "Debug level (0-3)");
>> +
>>    MODULE_DESCRIPTION("ASPEED Video Engine Driver");
>>    MODULE_AUTHOR("Eddie James");
>>    MODULE_LICENSE("GPL v2");
>>


More information about the openbmc mailing list