[PATCH 2/6] media: aspeed: add dprintk for more detailed log control
Paul Menzel
pmenzel at molgen.mpg.de
Thu Oct 14 17:28:21 AEDT 2021
[Cc: +Steven, +Ingo for tracing questions]
Dear Jammy,
Am 14.10.21 um 05:48 schrieb Jammy Huang:
> Add dprintk to categorize the log into NOTICE/INFO/TRACE/IRQ/REG.
> The on/off is controlled by module_param, debug.
Currently dev_dbg is dynamic debug, which can be controlled using the
Linux kernel command line or debugfs already?
From your patch:
> +MODULE_PARM_DESC(debug, "set debugging level (0=reg,2=irq,4=trace,8=info(|-able)).");
What does (|-able) mean? Maybe give some examples in the commit message
as documentation?
Lastly, instead of parameter name `debug`, I’d use `log_level`, which
would be more accurate.
Why is more granularity needed/useful, and not just debug and non-debug,
where the existing Linux kernel levels `pr_info`, `pr_warn`, … are used?
Looking at the amount of log messages, the granularity does not look needed.
> Signed-off-by: Jammy Huang <jammy_huang at aspeedtech.com>
> ---
> drivers/media/platform/aspeed-video.c | 73 ++++++++++++++++++++++-----
> 1 file changed, 60 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index 6259cf17a7cc..7b8129b0ca5f 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -31,6 +31,19 @@
> #include <media/v4l2-ioctl.h>
> #include <media/videobuf2-dma-contig.h>
>
> +
> +#define LOG_REG BIT(4)
> +#define LOG_DEBUG BIT(3)
> +#define LOG_TRACE BIT(2)
Could ftrace be used for this? It looks like there are static functions.
No idea, if there is already a “native” Linux kernel solution for this.
> +#define LOG_INFO BIT(1)
> +#define LOG_NOTICE BIT(0)
> +
> +#define dprintk(level, fmt, arg...) do { \
> + if (debug & level) \
> + pr_debug(pr_fmt("[%s]: " fmt), DEVICE_NAME, ##arg); \
> +} while (0)
> +
> +
> #define DEVICE_NAME "aspeed-video"
>
> #define ASPEED_VIDEO_JPEG_NUM_QUALITIES 12
> @@ -390,6 +403,8 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
> },
> };
>
> +static unsigned int debug;
> +
> static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
> {
> int i;
> @@ -437,7 +452,7 @@ static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
> t &= ~clear;
> t |= bits;
> writel(t, video->base + reg);
> - dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
> + dprintk(LOG_REG, "update %03x[%08x -> %08x]\n", reg, before,
> readl(video->base + reg));
> }
>
> @@ -445,14 +460,14 @@ static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
> {
> u32 t = readl(video->base + reg);
>
> - dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
> + dprintk(LOG_REG, "read %03x[%08x]\n", reg, t);
> return t;
> }
>
> static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
> {
> writel(val, video->base + reg);
> - dev_dbg(video->dev, "write %03x[%08x]\n", reg,
> + dprintk(LOG_REG, "write %03x[%08x]\n", reg,
> readl(video->base + reg));
> }
>
> @@ -474,13 +489,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
> u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
>
> if (video->v4l2_input_status) {
> - dev_dbg(video->dev, "No signal; don't start frame\n");
> + dprintk(LOG_NOTICE, "No signal; don't start frame\n");
> return 0;
> }
>
> if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
> !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
> - dev_dbg(video->dev, "Engine busy; don't start frame\n");
> + dprintk(LOG_NOTICE, "Engine busy; don't start frame\n");
> return -EBUSY;
> }
>
> @@ -489,7 +504,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
> struct aspeed_video_buffer, link);
> if (!buf) {
> spin_unlock_irqrestore(&video->lock, flags);
> - dev_dbg(video->dev, "No buffers; don't start frame\n");
> + dprintk(LOG_NOTICE, "No buffers; don't start frame\n");
> return -EPROTO;
> }
>
> @@ -565,7 +580,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
>
> static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
> {
> - dev_dbg(video->dev, "Resolution changed; resetting\n");
> + dprintk(LOG_INFO, "Resolution changed; resetting\n");
>
> set_bit(VIDEO_RES_CHANGE, &video->flags);
> clear_bit(VIDEO_FRAME_INPRG, &video->flags);
> @@ -590,6 +605,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
> struct aspeed_video *video = arg;
> u32 sts = aspeed_video_read(video, VE_INTERRUPT_STATUS);
>
> + dprintk(LOG_DEBUG, "irq sts=%#x %s%s%s%s\n", sts,
> + sts & VE_INTERRUPT_MODE_DETECT_WD ? ", unlock" : "",
> + sts & VE_INTERRUPT_MODE_DETECT ? ", lock" : "",
> + sts & VE_INTERRUPT_CAPTURE_COMPLETE ? ", capture-done" : "",
> + sts & VE_INTERRUPT_COMP_COMPLETE ? ", comp-done" : "");
> +
Please split adding new log messages out into a separate commit.
> /*
> * Resolution changed or signal was lost; reset the engine and
> * re-initialize
> @@ -766,7 +787,7 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
> aspeed_video_write(video, VE_STREAM_BUF_SIZE,
> compression_buffer_size_reg);
>
> - dev_dbg(video->dev, "Max compressed size: %x\n",
> + dprintk(LOG_INFO, "Max compressed size: %#x\n",
> video->max_compressed_size);
> }
>
> @@ -804,7 +825,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> res_check(video),
> MODE_DETECT_TIMEOUT);
> if (!rc) {
> - dev_dbg(video->dev, "Timed out; first mode detect\n");
> + dprintk(LOG_INFO, "Timed out; first mode detect\n");
> clear_bit(VIDEO_RES_DETECT, &video->flags);
> return;
> }
> @@ -822,7 +843,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> MODE_DETECT_TIMEOUT);
> clear_bit(VIDEO_RES_DETECT, &video->flags);
> if (!rc) {
> - dev_dbg(video->dev, "Timed out; second mode detect\n");
> + dprintk(LOG_INFO, "Timed out; second mode detect\n");
> return;
> }
>
> @@ -856,7 +877,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> } while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
>
> if (invalid_resolution) {
> - dev_dbg(video->dev, "Invalid resolution detected\n");
> + dprintk(LOG_NOTICE, "Invalid resolution detected\n");
> return;
> }
>
> @@ -873,7 +894,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> aspeed_video_update(video, VE_SEQ_CTRL, 0,
> VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
>
> - dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
> + dprintk(LOG_INFO, "Got resolution: %dx%d\n", det->width,
> det->height);
> }
>
> @@ -907,6 +928,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
>
> /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
> if (size < DIRECT_FETCH_THRESHOLD) {
> + dprintk(LOG_INFO, "Capture: Sync Mode\n");
> aspeed_video_write(video, VE_TGS_0,
> FIELD_PREP(VE_TGS_FIRST,
> video->frame_left - 1) |
> @@ -918,6 +940,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
> video->frame_bottom + 1));
> aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
> } else {
> + dprintk(LOG_INFO, "Capture: Direct Mode\n");
> aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
> }
>
> @@ -934,6 +957,10 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
> if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
> goto err_mem;
>
> + dprintk(LOG_INFO, "src buf0 addr(%#x) size(%d)\n",
> + video->srcs[0].dma, video->srcs[0].size);
> + dprintk(LOG_INFO, "src buf1 addr(%#x) size(%d)\n",
> + video->srcs[1].dma, video->srcs[1].size);
> aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
> aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
> }
> @@ -1010,6 +1037,8 @@ static void aspeed_video_start(struct aspeed_video *video)
>
> static void aspeed_video_stop(struct aspeed_video *video)
> {
> + dprintk(LOG_TRACE, "%s\n", __func__);
> +
> set_bit(VIDEO_STOPPED, &video->flags);
> cancel_delayed_work_sync(&video->res_work);
>
> @@ -1198,6 +1227,9 @@ static int aspeed_video_set_dv_timings(struct file *file, void *fh,
>
> timings->type = V4L2_DV_BT_656_1120;
>
> + dprintk(LOG_INFO, "set new timings(%dx%d)\n", timings->bt.width,
> + timings->bt.height);
> +
> return 0;
> }
>
> @@ -1362,6 +1394,8 @@ static void aspeed_video_resolution_work(struct work_struct *work)
> res_work);
> u32 input_status = video->v4l2_input_status;
>
> + dprintk(LOG_TRACE, "%s+\n", __func__);
> +
> aspeed_video_on(video);
>
> /* Exit early in case no clients remain */
> @@ -1380,6 +1414,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
> .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
> };
>
> + dprintk(LOG_INFO, "fire source change event\n");
> v4l2_event_queue(&video->vdev, &ev);
> } else if (test_bit(VIDEO_STREAMING, &video->flags)) {
> /* No resolution change so just restart streaming */
> @@ -1389,6 +1424,8 @@ static void aspeed_video_resolution_work(struct work_struct *work)
> done:
> clear_bit(VIDEO_RES_CHANGE, &video->flags);
> wake_up_interruptible_all(&video->wait);
> +
> + dprintk(LOG_TRACE, "%s-\n", __func__);
> }
>
> static int aspeed_video_open(struct file *file)
> @@ -1476,6 +1513,7 @@ static int aspeed_video_start_streaming(struct vb2_queue *q,
> int rc;
> struct aspeed_video *video = vb2_get_drv_priv(q);
>
> + dprintk(LOG_TRACE, "%s\n", __func__);
> video->sequence = 0;
> video->perf.duration_max = 0;
> video->perf.duration_min = 0xffffffff;
> @@ -1495,13 +1533,15 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
> int rc;
> struct aspeed_video *video = vb2_get_drv_priv(q);
>
> + dprintk(LOG_TRACE, "%s+\n", __func__);
> +
> clear_bit(VIDEO_STREAMING, &video->flags);
>
> rc = wait_event_timeout(video->wait,
> !test_bit(VIDEO_FRAME_INPRG, &video->flags),
> STOP_TIMEOUT);
> if (!rc) {
> - dev_dbg(video->dev, "Timed out when stopping streaming\n");
> + dprintk(LOG_NOTICE, "Timed out when stopping streaming\n");
>
> /*
> * Need to force stop any DMA and try and get HW into a good
> @@ -1516,6 +1556,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
> }
>
> aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
> + dprintk(LOG_TRACE, "%s-\n", __func__);
> }
>
> static void aspeed_video_buf_queue(struct vb2_buffer *vb)
> @@ -1715,6 +1756,7 @@ static int aspeed_video_init(struct aspeed_video *video)
> dev_err(dev, "Unable to request IRQ %d\n", irq);
> return rc;
> }
> + dev_info(video->dev, "irq %d\n", irq);
>
> video->eclk = devm_clk_get(dev, "eclk");
> if (IS_ERR(video->eclk)) {
> @@ -1751,6 +1793,8 @@ static int aspeed_video_init(struct aspeed_video *video)
> rc = -ENOMEM;
> goto err_release_reserved_mem;
> }
> + dev_info(video->dev, "alloc mem size(%d) at %#x for jpeg header\n",
> + VE_JPEG_HEADER_SIZE, video->jpeg.dma);
>
> aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
>
> @@ -1856,6 +1900,9 @@ static struct platform_driver aspeed_video_driver = {
>
> module_platform_driver(aspeed_video_driver);
>
> +module_param(debug, int, 0644);
> +MODULE_PARM_DESC(debug, "set debugging level (0=reg,2=irq,4=trace,8=info(|-able)).");
> +
> MODULE_DESCRIPTION("ASPEED Video Engine Driver");
> MODULE_AUTHOR("Eddie James");
> MODULE_LICENSE("GPL v2");
Kind regards,
Paul
More information about the openbmc
mailing list