[PATCH v2 10/15] peci: Add support for PECI device drivers
Winiarska, Iwona
iwona.winiarska at intel.com
Tue Nov 16 09:20:14 AEDT 2021
On Fri, 2021-08-27 at 14:19 -0700, Dan Williams wrote:
> On Tue, Aug 3, 2021 at 4:36 AM Iwona Winiarska
> <iwona.winiarska at intel.com> wrote:
> >
> > Here we're adding support for PECI device drivers, which unlike PECI
>
> s/Here we're adding/Add/
>
> > controller drivers are actually able to provide functionalities to
> > userspace.
Done.
>
> >
> > We're also extending peci_request API to allow querying more details
>
> s/We're also extending/Also, extend/
Done.
>
> ...for the most part imperative tense is the preferred tense, by
> upstream maintainers, for changelogs.
>
> > about PECI device (e.g. model/family), that's going to be used to find
> > a compatible peci_driver.
> >
> > Signed-off-by: Iwona Winiarska <iwona.winiarska at intel.com>
> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> > ---
> > drivers/peci/Kconfig | 1 +
> > drivers/peci/core.c | 49 +++++++++
> > drivers/peci/device.c | 105 ++++++++++++++++++++
> > drivers/peci/internal.h | 75 ++++++++++++++
> > drivers/peci/request.c | 214 ++++++++++++++++++++++++++++++++++++++++
> > include/linux/peci.h | 19 ++++
> > lib/Kconfig | 2 +-
> > 7 files changed, 464 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
> > index 99279df97a78..1d0532e3a801 100644
> > --- a/drivers/peci/Kconfig
> > +++ b/drivers/peci/Kconfig
> > @@ -2,6 +2,7 @@
> >
> > menuconfig PECI
> > tristate "PECI support"
> > + select GENERIC_LIB_X86
>
> GENERIC_LIB_X86 has dependencies, so this 'select' will make kbuild
> unhappy when that dependency is not met. Given that this symbol
> already selected by X86, it seems this just wants a "depends on
> GENERIC_LIB_X86".
Not applicable anymore after patches 1 and 2 got dropped following feedback from
arch/x86.
>
> > help
> > The Platform Environment Control Interface (PECI) is an interface
> > that provides a communication channel to Intel processors and
> > diff --git a/drivers/peci/core.c b/drivers/peci/core.c
> > index c473acb3c2a0..33c07920493d 100644
> > --- a/drivers/peci/core.c
> > +++ b/drivers/peci/core.c
> > @@ -157,8 +157,57 @@ struct peci_controller *devm_peci_controller_add(struct
> > device *dev,
> > }
> > EXPORT_SYMBOL_NS_GPL(devm_peci_controller_add, PECI);
> >
> > +static const struct peci_device_id *
> > +peci_bus_match_device_id(const struct peci_device_id *id, struct
> > peci_device *device)
> > +{
> > + while (id->family != 0) {
> > + if (id->family == device->info.family &&
> > + id->model == device->info.model)
> > + return id;
> > + id++;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +static int peci_bus_device_match(struct device *dev, struct device_driver
> > *drv)
> > +{
> > + struct peci_device *device = to_peci_device(dev);
> > + struct peci_driver *peci_drv = to_peci_driver(drv);
> > +
> > + if (dev->type != &peci_device_type)
> > + return 0;
> > +
> > + if (peci_bus_match_device_id(peci_drv->id_table, device))
> > + return 1;
>
> Save a couple lines and do:
>
> return peci_bus_match_device_id(...)
Done.
>
> > +
> > + return 0;
> > +}
> > +
> > +static int peci_bus_device_probe(struct device *dev)
> > +{
> > + struct peci_device *device = to_peci_device(dev);
> > + struct peci_driver *driver = to_peci_driver(dev->driver);
> > +
> > + return driver->probe(device, peci_bus_match_device_id(driver-
> > >id_table, device));
> > +}
> > +
> > +static int peci_bus_device_remove(struct device *dev)
>
> Note, in linux-next this prototype has changed to:
>
> void (*remove)(struct device *dev);
>
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/include/linux/device/bus.h
>
>
> > +{
> > + struct peci_device *device = to_peci_device(dev);
> > + struct peci_driver *driver = to_peci_driver(dev->driver);
> > +
> > + if (driver->remove)
> > + driver->remove(device);
> > +
> > + return 0;
> > +}
> > +
> > struct bus_type peci_bus_type = {
> > .name = "peci",
> > + .match = peci_bus_device_match,
> > + .probe = peci_bus_device_probe,
> > + .remove = peci_bus_device_remove,
> > .bus_groups = peci_bus_groups,
> > };
> >
> > diff --git a/drivers/peci/device.c b/drivers/peci/device.c
> > index d77d9dabd51e..a78c02399574 100644
> > --- a/drivers/peci/device.c
> > +++ b/drivers/peci/device.c
> > @@ -1,11 +1,85 @@
> > // SPDX-License-Identifier: GPL-2.0-only
> > // Copyright (c) 2018-2021 Intel Corporation
> >
> > +#include <linux/bitfield.h>
> > #include <linux/peci.h>
> > #include <linux/slab.h>
> > +#include <linux/x86/cpu.h>
> >
> > #include "internal.h"
> >
> > +#define REVISION_NUM_MASK GENMASK(15, 8)
> > +static int peci_get_revision(struct peci_device *device, u8 *revision)
> > +{
> > + struct peci_request *req;
> > + u64 dib;
> > +
> > + req = peci_get_dib(device);
>
> I would expect peci_get_dib() to return @dib.
get_dib is a PECI command name - I changed the naming scheme slightly to make
things more clear, e.g. peci_xfer_get_dib().
>
> > + if (IS_ERR(req))
> > + return PTR_ERR(req);
> > +
> > + /*
> > + * PECI device may be in a state where it is unable to return a
> > proper
> > + * DIB, in which case it returns 0 as DIB value.
> > + * Let's treat this as an error to avoid carrying on with the
> > detection
> > + * using invalid revision.
> > + */
> > + dib = peci_request_data_dib(req);
>
> I would expect peci_request_data_dib() to make a request.
Changed peci_request_data_dib to peci_request_dib_read and
peci_request_data_temp to peci_request_temp_read to align with
peci_request_data_read*.
>
> A stack allocated peci_request passed to peci_get_dib() that returns
> an error code would seem to be cleaner than this current organization.
>
> > + if (dib == 0) {
> > + peci_request_free(req);
> > + return -EIO;
> > + }
> > +
> > + *revision = FIELD_GET(REVISION_NUM_MASK, dib);
> > +
> > + peci_request_free(req);
> > +
> > + return 0;
> > +}
> > +
> > +static int peci_get_cpu_id(struct peci_device *device, u32 *cpu_id)
> > +{
> > + struct peci_request *req;
> > + int ret;
> > +
> > + req = peci_pkg_cfg_readl(device, PECI_PCS_PKG_ID,
> > PECI_PKG_ID_CPU_ID);
> > + if (IS_ERR(req))
> > + return PTR_ERR(req);
> > +
> > + ret = peci_request_status(req);
> > + if (ret)
> > + goto out_req_free;
> > +
> > + *cpu_id = peci_request_data_readl(req);
> > +out_req_free:
> > + peci_request_free(req);
> > +
> > + return ret;
> > +}
> > +
> > +static int peci_device_info_init(struct peci_device *device)
> > +{
> > + u8 revision;
> > + u32 cpu_id;
> > + int ret;
> > +
> > + ret = peci_get_cpu_id(device, &cpu_id);
> > + if (ret)
> > + return ret;
> > +
> > + device->info.family = x86_family(cpu_id);
> > + device->info.model = x86_model(cpu_id);
> > +
> > + ret = peci_get_revision(device, &revision);
> > + if (ret)
> > + return ret;
> > + device->info.peci_revision = revision;
> > +
> > + device->info.socket_id = device->addr - PECI_BASE_ADDR;
> > +
> > + return 0;
> > +}
> > +
> > static int peci_detect(struct peci_controller *controller, u8 addr)
> > {
> > struct peci_request *req;
> > @@ -79,6 +153,10 @@ int peci_device_create(struct peci_controller
> > *controller, u8 addr)
> > device->dev.bus = &peci_bus_type;
> > device->dev.type = &peci_device_type;
> >
> > + ret = peci_device_info_init(device);
> > + if (ret)
> > + goto err_free;
> > +
> > ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device-
> > >addr);
> > if (ret)
> > goto err_free;
> > @@ -102,6 +180,33 @@ void peci_device_destroy(struct peci_device *device)
> > device_unregister(&device->dev);
> > }
> >
> > +int __peci_driver_register(struct peci_driver *driver, struct module
> > *owner,
> > + const char *mod_name)
> > +{
> > + driver->driver.bus = &peci_bus_type;
> > + driver->driver.owner = owner;
> > + driver->driver.mod_name = mod_name;
> > +
> > + if (!driver->probe) {
> > + pr_err("peci: trying to register driver without probe
> > callback\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (!driver->id_table) {
> > + pr_err("peci: trying to register driver without device id
> > table\n");
> > + return -EINVAL;
> > + }
> > +
> > + return driver_register(&driver->driver);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(__peci_driver_register, PECI);
> > +
> > +void peci_driver_unregister(struct peci_driver *driver)
> > +{
> > + driver_unregister(&driver->driver);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_driver_unregister, PECI);
> > +
> > static void peci_device_release(struct device *dev)
> > {
> > struct peci_device *device = to_peci_device(dev);
> > diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h
> > index 978e12c8e1d3..d661e1b65694 100644
> > --- a/drivers/peci/internal.h
> > +++ b/drivers/peci/internal.h
> > @@ -19,6 +19,34 @@ struct peci_request;
> > struct peci_request *peci_request_alloc(struct peci_device *device, u8
> > tx_len, u8 rx_len);
> > void peci_request_free(struct peci_request *req);
> >
> > +int peci_request_status(struct peci_request *req);
> > +u64 peci_request_data_dib(struct peci_request *req);
> > +
> > +u8 peci_request_data_readb(struct peci_request *req);
> > +u16 peci_request_data_readw(struct peci_request *req);
> > +u32 peci_request_data_readl(struct peci_request *req);
> > +u64 peci_request_data_readq(struct peci_request *req);
> > +
> > +struct peci_request *peci_get_dib(struct peci_device *device);
> > +struct peci_request *peci_get_temp(struct peci_device *device);
> > +
> > +struct peci_request *peci_pkg_cfg_readb(struct peci_device *device, u8
> > index, u16 param);
> > +struct peci_request *peci_pkg_cfg_readw(struct peci_device *device, u8
> > index, u16 param);
> > +struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8
> > index, u16 param);
> > +struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8
> > index, u16 param);
> > +
> > +/**
> > + * struct peci_device_id - PECI device data to match
> > + * @data: pointer to driver private data specific to device
> > + * @family: device family
> > + * @model: device model
> > + */
> > +struct peci_device_id {
> > + const void *data;
> > + u16 family;
> > + u8 model;
> > +};
> > +
> > extern struct device_type peci_device_type;
> > extern const struct attribute_group *peci_device_groups[];
> >
> > @@ -28,6 +56,53 @@ void peci_device_destroy(struct peci_device *device);
> > extern struct bus_type peci_bus_type;
> > extern const struct attribute_group *peci_bus_groups[];
> >
> > +/**
> > + * struct peci_driver - PECI driver
> > + * @driver: inherit device driver
> > + * @probe: probe callback
> > + * @remove: remove callback
> > + * @id_table: PECI device match table to decide which device to bind
> > + */
> > +struct peci_driver {
> > + struct device_driver driver;
> > + int (*probe)(struct peci_device *device, const struct peci_device_id
> > *id);
> > + void (*remove)(struct peci_device *device);
> > + const struct peci_device_id *id_table;
> > +};
> > +
> > +static inline struct peci_driver *to_peci_driver(struct device_driver *d)
> > +{
> > + return container_of(d, struct peci_driver, driver);
> > +}
> > +
> > +int __peci_driver_register(struct peci_driver *driver, struct module
> > *owner,
> > + const char *mod_name);
> > +/**
> > + * peci_driver_register() - register PECI driver
> > + * @driver: the driver to be registered
> > + * @owner: owner module of the driver being registered
> > + * @mod_name: module name string
> > + *
> > + * PECI drivers that don't need to do anything special in module init
> > should
> > + * use the convenience "module_peci_driver" macro instead
> > + *
> > + * Return: zero on success, else a negative error code.
> > + */
> > +#define peci_driver_register(driver) \
> > + __peci_driver_register(driver, THIS_MODULE, KBUILD_MODNAME)
> > +void peci_driver_unregister(struct peci_driver *driver);
> > +
> > +/**
> > + * module_peci_driver() - helper macro for registering a modular PECI
> > driver
> > + * @__peci_driver: peci_driver struct
> > + *
> > + * Helper macro for PECI drivers which do not do anything special in module
> > + * init/exit. This eliminates a lot of boilerplate. Each module may only
> > + * use this macro once, and calling it replaces module_init() and
> > module_exit()
> > + */
> > +#define module_peci_driver(__peci_driver) \
> > + module_driver(__peci_driver, peci_driver_register,
> > peci_driver_unregister)
> > +
> > extern struct device_type peci_controller_type;
> >
> > int peci_controller_scan_devices(struct peci_controller *controller);
> > diff --git a/drivers/peci/request.c b/drivers/peci/request.c
> > index 81b567bc7b87..fe032d5a5e1b 100644
> > --- a/drivers/peci/request.c
> > +++ b/drivers/peci/request.c
> > @@ -1,13 +1,140 @@
> > // SPDX-License-Identifier: GPL-2.0-only
> > // Copyright (c) 2021 Intel Corporation
> >
> > +#include <linux/bug.h>
> > #include <linux/export.h>
> > #include <linux/peci.h>
> > #include <linux/slab.h>
> > #include <linux/types.h>
> >
> > +#include <asm/unaligned.h>
> > +
> > #include "internal.h"
> >
> > +#define PECI_GET_DIB_CMD 0xf7
> > +#define PECI_GET_DIB_WR_LEN 1
> > +#define PECI_GET_DIB_RD_LEN 8
> > +
> > +#define PECI_RDPKGCFG_CMD 0xa1
> > +#define PECI_RDPKGCFG_WR_LEN 5
> > +#define PECI_RDPKGCFG_RD_LEN_BASE 1
> > +#define PECI_WRPKGCFG_CMD 0xa5
> > +#define PECI_WRPKGCFG_WR_LEN_BASE 6
> > +#define PECI_WRPKGCFG_RD_LEN 1
> > +
> > +/* Device Specific Completion Code (CC) Definition */
> > +#define PECI_CC_SUCCESS 0x40
> > +#define PECI_CC_NEED_RETRY 0x80
> > +#define PECI_CC_OUT_OF_RESOURCE 0x81
> > +#define PECI_CC_UNAVAIL_RESOURCE 0x82
> > +#define PECI_CC_INVALID_REQ 0x90
> > +#define PECI_CC_MCA_ERROR 0x91
> > +#define PECI_CC_CATASTROPHIC_MCA_ERROR 0x93
> > +#define PECI_CC_FATAL_MCA_ERROR 0x94
> > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB 0x98
> > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR 0x9B
> > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA 0x9C
> > +
> > +#define PECI_RETRY_BIT BIT(0)
> > +
> > +#define PECI_RETRY_TIMEOUT msecs_to_jiffies(700)
> > +#define PECI_RETRY_INTERVAL_MIN msecs_to_jiffies(1)
> > +#define PECI_RETRY_INTERVAL_MAX msecs_to_jiffies(128)
> > +
> > +static u8 peci_request_data_cc(struct peci_request *req)
> > +{
> > + return req->rx.buf[0];
> > +}
> > +
> > +/**
> > + * peci_request_status() - return -errno based on PECI completion code
> > + * @req: the PECI request that contains response data with completion code
> > + *
> > + * It can't be used for Ping(), GetDIB() and GetTemp() - for those commands
> > we
> > + * don't expect completion code in the response.
> > + *
> > + * Return: -errno
> > + */
> > +int peci_request_status(struct peci_request *req)
> > +{
> > + u8 cc = peci_request_data_cc(req);
> > +
> > + if (cc != PECI_CC_SUCCESS)
> > + dev_dbg(&req->device->dev, "ret: %#02x\n", cc);
> > +
> > + switch (cc) {
> > + case PECI_CC_SUCCESS:
> > + return 0;
> > + case PECI_CC_NEED_RETRY:
> > + case PECI_CC_OUT_OF_RESOURCE:
> > + case PECI_CC_UNAVAIL_RESOURCE:
> > + return -EAGAIN;
> > + case PECI_CC_INVALID_REQ:
> > + return -EINVAL;
> > + case PECI_CC_MCA_ERROR:
> > + case PECI_CC_CATASTROPHIC_MCA_ERROR:
> > + case PECI_CC_FATAL_MCA_ERROR:
> > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB:
> > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR:
> > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA:
> > + return -EIO;
> > + }
> > +
> > + WARN_ONCE(1, "Unknown PECI completion code: %#02x\n", cc);
> > +
> > + return -EIO;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_status, PECI);
> > +
> > +static int peci_request_xfer(struct peci_request *req)
> > +{
> > + struct peci_device *device = req->device;
> > + struct peci_controller *controller = to_peci_controller(device-
> > >dev.parent);
> > + int ret;
> > +
> > + mutex_lock(&controller->bus_lock);
> > + ret = controller->ops->xfer(controller, device->addr, req);
> > + mutex_unlock(&controller->bus_lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int peci_request_xfer_retry(struct peci_request *req)
> > +{
> > + long wait_interval = PECI_RETRY_INTERVAL_MIN;
> > + struct peci_device *device = req->device;
> > + struct peci_controller *controller = to_peci_controller(device-
> > >dev.parent);
> > + unsigned long start = jiffies;
> > + int ret;
> > +
> > + /* Don't try to use it for ping */
> > + if (WARN_ON(!req->rx.buf))
> > + return 0;
> > +
> > + do {
> > + ret = peci_request_xfer(req);
> > + if (ret) {
> > + dev_dbg(&controller->dev, "xfer error: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + if (peci_request_status(req) != -EAGAIN)
> > + return 0;
> > +
> > + /* Set the retry bit to indicate a retry attempt */
> > + req->tx.buf[1] |= PECI_RETRY_BIT;
> > +
> > + if (schedule_timeout_interruptible(wait_interval))
> > + return -ERESTARTSYS;
> > +
> > + wait_interval = min_t(long, wait_interval * 2,
> > PECI_RETRY_INTERVAL_MAX);
> > + } while (time_before(jiffies, start + PECI_RETRY_TIMEOUT));
> > +
> > + dev_dbg(&controller->dev, "request timed out\n");
> > +
> > + return -ETIMEDOUT;
> > +}
> > +
> > /**
> > * peci_request_alloc() - allocate &struct peci_requests
> > * @device: PECI device to which request is going to be sent
> > @@ -48,3 +175,90 @@ void peci_request_free(struct peci_request *req)
> > kfree(req);
> > }
> > EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI);
> > +
> > +struct peci_request *peci_get_dib(struct peci_device *device)
> > +{
> > + struct peci_request *req;
> > + int ret;
> > +
> > + req = peci_request_alloc(device, PECI_GET_DIB_WR_LEN,
> > PECI_GET_DIB_RD_LEN);
> > + if (!req)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + req->tx.buf[0] = PECI_GET_DIB_CMD;
> > +
> > + ret = peci_request_xfer(req);
> > + if (ret) {
> > + peci_request_free(req);
> > + return ERR_PTR(ret);
> > + }
> > +
> > + return req;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI);
> > +
> > +static struct peci_request *
> > +__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len)
> > +{
> > + struct peci_request *req;
> > + int ret;
> > +
> > + req = peci_request_alloc(device, PECI_RDPKGCFG_WR_LEN,
> > PECI_RDPKGCFG_RD_LEN_BASE + len);
> > + if (!req)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + req->tx.buf[0] = PECI_RDPKGCFG_CMD;
> > + req->tx.buf[1] = 0;
> > + req->tx.buf[2] = index;
> > + put_unaligned_le16(param, &req->tx.buf[3]);
> > +
> > + ret = peci_request_xfer_retry(req);
> > + if (ret) {
> > + peci_request_free(req);
> > + return ERR_PTR(ret);
> > + }
> > +
> > + return req;
> > +}
> > +
> > +u8 peci_request_data_readb(struct peci_request *req)
> > +{
> > + return req->rx.buf[1];
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readb, PECI);
> > +
> > +u16 peci_request_data_readw(struct peci_request *req)
> > +{
> > + return get_unaligned_le16(&req->rx.buf[1]);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readw, PECI);
> > +
> > +u32 peci_request_data_readl(struct peci_request *req)
> > +{
> > + return get_unaligned_le32(&req->rx.buf[1]);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readl, PECI);
> > +
> > +u64 peci_request_data_readq(struct peci_request *req)
> > +{
> > + return get_unaligned_le64(&req->rx.buf[1]);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readq, PECI);
> > +
> > +u64 peci_request_data_dib(struct peci_request *req)
> > +{
> > + return get_unaligned_le64(&req->rx.buf[0]);
> > +}
> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI);
> > +
> > +#define __read_pkg_config(x, type) \
> > +struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index,
> > u16 param) \
> > +{ \
> > + return __pkg_cfg_read(device, index, param, sizeof(type)); \
> > +} \
> > +EXPORT_SYMBOL_NS_GPL(peci_pkg_cfg_##x, PECI)
> > +
> > +__read_pkg_config(readb, u8);
> > +__read_pkg_config(readw, u16);
> > +__read_pkg_config(readl, u32);
> > +__read_pkg_config(readq, u64);
> > diff --git a/include/linux/peci.h b/include/linux/peci.h
> > index 26e0a4e73b50..dcf1c53f4e40 100644
> > --- a/include/linux/peci.h
> > +++ b/include/linux/peci.h
> > @@ -14,6 +14,14 @@
> > */
> > #define PECI_REQUEST_MAX_BUF_SIZE 32
> >
> > +#define PECI_PCS_PKG_ID 0 /* Package Identifier
> > Read */
> > +#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */
> > +#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */
> > +#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */
> > +#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */
> > +#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update
> > Revision */
> > +#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */
> > +
> > struct peci_controller;
> > struct peci_request;
> >
> > @@ -59,6 +67,11 @@ static inline struct peci_controller
> > *to_peci_controller(void *d)
> > * struct peci_device - PECI device
> > * @dev: device object to register PECI device to the device model
> > * @controller: manages the bus segment hosting this PECI device
> > + * @info: PECI device characteristics
> > + * @info.family: device family
> > + * @info.model: device model
> > + * @info.peci_revision: PECI revision supported by the PECI device
> > + * @info.socket_id: the socket ID represented by the PECI device
> > * @addr: address used on the PECI bus connected to the parent controller
> > *
> > * A peci_device identifies a single device (i.e. CPU) connected to a PECI
> > bus.
> > @@ -67,6 +80,12 @@ static inline struct peci_controller
> > *to_peci_controller(void *d)
> > */
> > struct peci_device {
> > struct device dev;
> > + struct {
> > + u16 family;
> > + u8 model;
> > + u8 peci_revision;
> > + u8 socket_id;
> > + } info;
> > u8 addr;
> > };
> >
> > diff --git a/lib/Kconfig b/lib/Kconfig
> > index e538d4d773bd..7f7972d357c2 100644
> > --- a/lib/Kconfig
> > +++ b/lib/Kconfig
> > @@ -718,4 +718,4 @@ config ASN1_ENCODER
> >
> > config GENERIC_LIB_X86
> > bool
> > - depends on X86
> > + depends on X86 || PECI
>
> This looks broken, what in the GENERIC_LIB_X86 implementation depends on peci?
Not applicable anymore.
Apologies for the huge delay in my replies.
Thanks
-Iwona
More information about the openbmc
mailing list