[PATCH 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
Ping Guo
guopingjn at gmail.com
Tue May 25 13:12:18 AEST 2021
Joel Stanley <joel at jms.id.au> 于2021年5月24日周一 上午10:40写道：
> On Mon, 24 May 2021 at 00:30, <guopingjn at gmail.com> wrote:
> >
> > From: Ping Guo <guoping at inspur.com>
> >
> > The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
> > This dts file provides a basic configuration for its OpenBMC
> > development.
> >
> > Signed-off-by: George Liu <liuxiwei at inspur.com>
> > Signed-off-by: Ping Guo <guoping at inspur.com>
> > ---
> > arch/arm/boot/dts/Makefile | 1 +
> > .../boot/dts/aspeed-bmc-inspur-nf5280m6.dts | 725 ++++++++++++++++++
> > 2 files changed, 726 insertions(+)
> > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 03b5424bafa8..cc2580f1e99b 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1405,6 +1405,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> > aspeed-bmc-ibm-rainier-4u.dtb \
> > aspeed-bmc-intel-s2600wf.dtb \
> > aspeed-bmc-inspur-fp5280g2.dtb \
> > + aspeed-bmc-inspur-nf5280m6.dtb \
> > aspeed-bmc-lenovo-hr630.dtb \
> > aspeed-bmc-lenovo-hr855xg2.dtb \
> > aspeed-bmc-microsoft-olympus.dtb \
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> > new file mode 100644
> > index 000000000000..7ea0e3ae8ffd
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> > @@ -0,0 +1,725 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (c) 2021 Inspur Corporation
> > +/dts-v1/;
> > +
> > +#include "aspeed-g5.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +#include <dt-bindings/i2c/i2c.h>
> > +#include <dt-bindings/leds/leds-pca955x.h>
> > +
> > +/ {
> > + model = "NF5280M6 BMC";
> > + compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
> > +
> > + chosen {
> > + stdout-path = &uart5;
> > + bootargs = "console=ttyS4,115200 earlyprintk";
> > + };
> > +
> > + memory at 80000000 {
> > + reg = <0x80000000 0x40000000>;
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + vga_memory: framebuffer at 9f000000 {
> > + no-map;
> > + reg = <0x9f000000 0x01000000>; /* 16M */
> > + };
> > +
> > + gfx_memory: framebuffer {
> > + size = <0x01000000>;
> > + alignment = <0x01000000>;
> > + compatible = "shared-dma-pool";
> > + reusable;
> > + };
> > +
> > + video_engine_memory: jpegbuffer {
> > + size = <0x02000000>; /* 32M */
> > + alignment = <0x01000000>;
> > + compatible = "shared-dma-pool";
> > + reusable;
> > + };
> > +
> > + flash_memory: region at 98000000 {
> > + no-map;
> > + reg = <0x98000000 0x04000000>; /* 64M */
>
> Are you sure you need this? This is used by the aspeed-lpc-ctrl driver
> to map a region of the AHB into the LPC address space. This is
> normally only used by PowerPC systems.
>
Thanks,I think we don't neet this.I will modify this property.
> > + };
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > +
> > + bmc_alive {
> > + label = "bmc_alive";
> > + gpios = <&gpio ASPEED_GPIO(B, 0)
> GPIO_ACTIVE_LOW>;
> > + linux,default-trigger = "timer";
> > + led-pattern = <1000 1000>;
> > + };
> > +
> > + front-fan {
> > + label = "front-fan";
> > + gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + front-psu {
> > + label = "front-psu";
> > + gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + front-syshot {
> > + label = "front-syshot";
> > + gpios = <&gpio ASPEED_GPIO(J, 3)
> GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + front-memory {
> > + label = "front-memory";
> > + gpios = <&gpio ASPEED_GPIO(S, 7)
> GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + identify {
> > + label = "identify";
> > + gpios = <&gpio ASPEED_GPIO(AA, 0)
> GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
> > + iio-hwmon {
> > + compatible = "iio-hwmon";
> > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> > + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> > + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> > + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> > + };
> > +};
> > +
> > +&fmc {
> > + status = "okay";
> > + flash at 0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bmc";
> > + spi-max-frequency = <50000000>;
> > +#include "openbmc-flash-layout.dtsi"
> > + };
> > +};
> > +
> > +&spi1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_spi1_default>;
> > + flash at 0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bios";
> > + spi-max-frequency = <100000000>;
> > + };
> > +};
> > +
> > +&uart1 {
> > + status = "okay";
> > +};
> > +
> > +&uart5 {
> > + status = "okay";
> > +};
> > +
> > +&mac0 {
> > + status = "okay";
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rmii1_default>;
> > + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> > + <&syscon ASPEED_CLK_MAC1RCLK>;
> > + clock-names = "MACCLK", "RCLK";
> > + use-ncsi;
> > +};
> > +
> > +&mac1 {
> > + status = "okay";
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> > +};
> > +
> > +&gpio {
> > + power_out {
> > + gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_LOW>;
> > + output-low;
> > + };
> > +};
> > +
> > +&gpio {
> > + status = "okay";
> > + /* Enable GPIOE0 and GPIOE2 pass-through by default */
> > + pinctrl-names = "pass-through";
> > + pinctrl-0 = <&pinctrl_gpie0_default
> > + &pinctrl_gpie2_default>;
> > + gpio-line-names =
> > + /*A0-A7*/
> "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
> > + /*B0-B7*/
> "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
> > +
> "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
> > +
> "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
> > + /*C0-C7*/ "","","","","","","","",
> > + /*D0-D7*/
> "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
> > + "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
> > + /*E0-E7*/
> "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
> > + "FM_BOARD_ID4","FM_BOARD_ID5","","",
> > + /*F0-F7*/
> "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
> > +
> "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
> > + "RST_GLB_RST_WARN_N",
> > + /*G0-G7*/
> "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
> > +
> "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
> > + /*H0-H7*/
> "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
> > +
> "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
> > + /*I0-I7*/
> "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
> > +
> "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
> > + /*J0-J7*/
> "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
> > + "VGA_HSYNC","VGA_VSYNC","","",
> > + /*K0-K7*/ "","","","","","","","",
> > + /*L0-L7*/
> "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
> > + /*M0-M7*/ "","","","","","","","",
> > + /*N0-N7*/ "","","","","","","","",
> > + /*O0-O7*/ "","","","","","","","",
> > + /*P0-P7*/ "","","","","","","","",
> > + /*Q0-Q7*/
> "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
> > + /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
> > +
> "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
> > +
> "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
> > + /*S0-S7*/
> "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
> > + "GPIOS5_BMC","","GPIOS7_BMC",
> > + /*T0-T7*/ "","","","","","","","",
> > + /*U0-U7*/ "","","","","","","","",
> > + /*V0-V7*/ "","","","","","","","",
> > + /*W0-W7*/ "","","","","","","","",
> > + /*X0-X7*/ "","","","","","","","",
> > + /*Y0-Y7*/
> "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
> > + /*Z0-Z7*/
> "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
> > + "GPIOZ5","","",
> > + /*AA0-AA7*/
> "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
> > +
> "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
> > + /*AB0-AB7*/
> "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
> > + /*AC0-AC7*/ "","","","","","","","";
> > +};
> > +
> > +&i2c0 {
> > + /* FP_LCD */
> > + status = "okay";
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + eeprom at 50 {
> > + compatible = "atmel,24c256";
> > + reg = <0x50>;
> > + label = "fru";
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + tmp112 at 48 {
> > + compatible = "ti,tmp112";
> > + reg = <0x48>;
> > + label = "inlet";
> > + };
> > +
> > + tmp112 at 49 {
> > + compatible = "ti,tmp112";
> > + reg = <0x49>;
> > + label = "outlet";
> > + };
> > +
> > + pca9548 at 70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +};
> > +
> > +&i2c3 {
> > + status = "okay";
> > +
> > + pca9548 at 70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +
> > + pca9548 at 71 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x71>;
> > + };
> > +
> > + pca9548 at 72 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x72>;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + /* IPMB */
> > + status = "okay";
> > +};
> > +
> > +&i2c5 {
> > + status = "okay";
> > +
> > + pca9548 at 70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +};
> > +
> > +&i2c6 {
> > + status = "okay";
> > +
> > + pca9548 at 70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +};
> > +
> > +&i2c7 {
> > + status = "okay";
> > +
> > + adm1278 at 33 {
> > + compatible = "adi,adm1293";
> > + reg = <0x33>;
> > + };
> > +
> > + adm1278 at 32 {
> > + compatible = "adi,adm1293";
> > + reg = <0x32>;
> > + };
> > +
> > + adm1278 at 20 {
> > + compatible = "adi,adm1293";
> > + reg = <0x20>;
> > + };
> > +};
> > +
> > +&i2c8 {
> > + status = "okay";
> > +
> > + pca0: pca9555 at 23 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x23>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca1: pca9555 at 22 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x22>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca2: pca9555 at 20 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x20>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca3: pca9555 at 21 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x21>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +};
> > +
> > +&i2c9 {
> > + /* cpld */
> > + status = "okay";
> > +};
> > +
> > +&i2c10 {
> > + status = "okay";
> > +
> > + pca4: pca9555 at 24 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x24>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca5: pca9555 at 25 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x25>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +};
> > +
> > +&i2c11 {
> > + status = "okay";
> > +
> > + power-supply at 58 {
> > + compatible = "inspur,ipsps1";
> > + reg = <0x58>;
> > + };
> > +
> > + power-supply at 59 {
> > + compatible = "inspur,ipsps1";
> > + reg = <0x59>;
> > + };
> > +};
> > +
> > +&i2c12 {
> > + status = "okay";
> > +};
> > +
> > +&i2c13 {
> > + status = "okay";
> > +};
> > +
> > +&lpc_ctrl {
> > + status = "okay";
> > + memory-region = <&flash_memory>;
> > + flash = <&spi1>;
>
> As I described before, most of the time this driver is only used by
> the hiomap daemon on Power systems.
>
> > +};
> > +
> > +&gfx {
> > + status = "okay";
> > + memory-region = <&gfx_memory>;
> > +};
>
> This is the BMC display device. You only need to enable it if you are
> running code on the BMC to
>
> It is not related to using the BMC has a host PCIe display device.
>
> Will modify too.
> > +
> > +&pinctrl {
> > + aspeed,external-nodes = <&gfx &lhc>;
> > +};
> > +
> > +&pwm_tacho {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> > + &pinctrl_pwm2_default &pinctrl_pwm3_default
> > + &pinctrl_pwm4_default &pinctrl_pwm5_default
> > + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> > +
> > + fan at 0 {
> > + reg = <0x00>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> > + };
> > +
> > + fan at 1 {
> > + reg = <0x01>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> > + };
> > +
> > + fan at 2 {
> > + reg = <0x02>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> > + };
> > +
> > + fan at 3 {
> > + reg = <0x03>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> > + };
> > +
> > + fan at 4 {
> > + reg = <0x04>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> > + };
> > +
> > + fan at 5 {
> > + reg = <0x05>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> > + };
> > +
> > + fan at 6 {
> > + reg = <0x06>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> > + };
> > +
> > + fan at 7 {
> > + reg = <0x07>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> > + };
> > +};
> > +
> > +&kcs3 {
> > + status = "okay";
> > + kcs_addr = <0xca2>;
> > +};
> > +
> > +&kcs4 {
> > + status = "okay";
> > + kcs_addr = <0xca4>;
> > +};
> > +
> > +&adc {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> > + &pinctrl_adc2_default &pinctrl_adc3_default
> &pinctrl_adc4_default
> > + &pinctrl_adc5_default &pinctrl_adc6_default
> &pinctrl_adc7_default
> > + &pinctrl_adc8_default &pinctrl_adc9_default
> &pinctrl_adc10_default
> > + &pinctrl_adc11_default &pinctrl_adc12_default
> &pinctrl_adc13_default
> > + &pinctrl_adc14_default &pinctrl_adc15_default>;
> > +};
> > +
> > +&vhub {
> > + status = "okay";
> > +};
> > +
> > +&video {
> > + status = "okay";
> > + memory-region = <&video_engine_memory>;
> > +};
> > +
> > +&vuart {
> > + status = "okay";
> > +};
> > --
> > 2.17.1
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20210525/6882a4ab/attachment-0001.htm>
More information about the openbmc
mailing list