[PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver

Quan Nguyen quan at os.amperecomputing.com
Fri May 21 00:24:27 AEST 2021


On 19/05/2021 22:29, Rob Herring wrote:
> On Wed, 19 May 2021 14:49:34 +0700, Quan Nguyen wrote:
>> Add device tree binding document for the Aspeed SSIF BMC driver.
>>
>> Signed-off-by: Quan Nguyen <quan at os.amperecomputing.com>
>> ---
>> v3:
>>    + Switched to use DT schema format [Rob]
>>
>>   .../bindings/ipmi/aspeed-ssif-bmc.yaml        | 33 +++++++++++++++++++
>>   1 file changed, 33 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dts:21.13-26: Warning (reg_format): /example-0/ssif-bmc at 10:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: example-0: ssif-bmc at 10:reg:0: [16] is too short
> 	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
> 
> See https://patchwork.ozlabs.org/patch/1480727
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
> 
Thanks,
Will fix in next version.

- Quan


More information about the openbmc mailing list