[PATCH v3 00/16] ipmi: Allow raw access to KCS devices

Andrew Jeffery andrew at aj.id.au
Mon May 10 15:41:57 AEST 2021


Hello,

This is the 3rd spin of the series refactoring the keyboard-controller-style
device drivers in the IPMI subsystem.

v2 can be found (in two parts because yay patch workflow mistakes) at:

Cover letter:
https://lore.kernel.org/linux-arm-kernel/20210319061952.145040-1-andrew@aj.id.au/

Patches:
https://lore.kernel.org/linux-arm-kernel/20210319062752.145730-1-andrew@aj.id.au/

Several significant changes in v3:

1. The series is rebased onto v5.13-rc1

2. v5.13-rc1 includes Chiawei's patches reworking the LPC devicetree bindings,
   so they're no-longer required in the series.

3. After some discussion with Arnd[1] and investigating the serio subsystem,
   I've replaced the "raw" KCS driver (patch 16/21 in v2) with a serio adaptor
   (patch 11/16 in this series). The adaptor allows us to take advantage of the
   existing chardevs provided by serio.

[1] https://lore.kernel.org/linux-arm-kernel/37e75b07-a5c6-422f-84b3-54f2bea0b917@www.fastmail.com/

Finally, I've also addressed Zev Weiss' review comments where I thought it was
required. These comments covered a lot of minor issues across (almost) all the
patches, so it's best to review from a clean slate rather than attempt to review
the differences between spins.

Previously:

Changes in v2 include:

* A rebase onto v5.12-rc2
* Incorporation of off-list feedback on SerIRQ configuration from
  Chiawei
* Further validation on hardware for ASPEED KCS devices 2, 3 and 4
* Lifting the existing single-open constraint of the IPMI chardev
* Fixes addressing Rob's feedback on the conversion of the ASPEED KCS
  binding to dt-schema
* Fixes addressing Rob's feedback on the new aspeed,lpc-interrupts
  property definition for the ASPEED KCS binding

Please test and review!

Andrew

Andrew Jeffery (16):
  ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
  ipmi: kcs_bmc: Make status update atomic
  ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
  ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
  ipmi: kcs_bmc: Turn the driver data-structures inside-out
  ipmi: kcs_bmc: Split headers into device and client
  ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
  ipmi: kcs_bmc: Decouple the IPMI chardev from the core
  ipmi: kcs_bmc: Allow clients to control KCS IRQ state
  ipmi: kcs_bmc: Don't enforce single-open policy in the kernel
  ipmi: kcs_bmc: Add serio adaptor
  dt-bindings: ipmi: Convert ASPEED KCS binding to schema
  dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
  ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
  ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
  ipmi: kcs_bmc_aspeed: Optionally apply status address

 .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 106 +++
 .../bindings/ipmi/aspeed-kcs-bmc.txt          |  33 -
 drivers/char/ipmi/Kconfig                     |  27 +
 drivers/char/ipmi/Makefile                    |   2 +
 drivers/char/ipmi/kcs_bmc.c                   | 526 ++++-----------
 drivers/char/ipmi/kcs_bmc.h                   |  92 +--
 drivers/char/ipmi/kcs_bmc_aspeed.c            | 635 +++++++++++++-----
 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c         | 568 ++++++++++++++++
 drivers/char/ipmi/kcs_bmc_client.h            |  48 ++
 drivers/char/ipmi/kcs_bmc_device.h            |  22 +
 drivers/char/ipmi/kcs_bmc_npcm7xx.c           |  94 ++-
 drivers/char/ipmi/kcs_bmc_serio.c             | 151 +++++
 12 files changed, 1582 insertions(+), 722 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
 delete mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
 create mode 100644 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c
 create mode 100644 drivers/char/ipmi/kcs_bmc_client.h
 create mode 100644 drivers/char/ipmi/kcs_bmc_device.h
 create mode 100644 drivers/char/ipmi/kcs_bmc_serio.c

-- 
2.27.0



More information about the openbmc mailing list