[PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.

Rob Herring robh at kernel.org
Tue May 4 01:20:45 AEST 2021

On Mon, 03 May 2021 09:43:34 +0800, Steven Lee wrote:
> Add the description for describing the AST 2600 EVB reference design of
> GPIO regulators and provide the example in the document.
> AST2600-A2 EVB has the reference design for enabling SD bus
> power and toggling SD bus signal voltage by GPIO pins.
> In the reference design, GPIOV0 of AST2600-A2 EVB is connected to
> power load switch that providing 3.3v to SD1 bus vdd. GPIOV1 is
> connected to a 1.8v and a 3.3v power load switch that providing
> signal voltage to
> SD1 bus.
> If GPIOV0 is active high, SD1 bus is enabled. Otherwise, SD1 bus is
> disabled.
> If GPIOV1 is active high, 3.3v power load switch is enabled, SD1
> signal voltage is 3.3v. Otherwise, 1.8v power load switch will be
> enabled, SD1 signal voltage becomes 1.8v.
> AST2600-A2 EVB also support toggling signal voltage for SD2 bus.
> The design is the same as SD1 bus. It uses GPIOV2 as power-gpio and
> GPIOV3 as power-switch-gpio.
> Signed-off-by: Steven Lee <steven_lee at aspeedtech.com>
> ---
>  .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml:97:5: [error] syntax error: expected <block end>, but found '<scalar>' (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/mmc/aspeed,sdhci.example.dts'
Traceback (most recent call last):
  File "/usr/local/bin/dt-extract-example", line 45, in <module>
    binding = yaml.load(open(args.yamlfile, encoding='utf-8').read())
  File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 421, in load
    return constructor.get_single_data()
  File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 109, in get_single_data
    node = self.composer.get_single_node()
  File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node
  File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document
  File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node
  File "_ruamel_yaml.pyx", line 891, in _ruamel_yaml.CParser._compose_mapping_node
  File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event
ruamel.yaml.parser.ParserError: while parsing a block mapping
  in "<unicode string>", line 5, column 1
did not find expected key
  in "<unicode string>", line 97, column 5
make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/mmc/aspeed,sdhci.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml:  while parsing a block mapping
  in "<unicode string>", line 5, column 1
did not find expected key
  in "<unicode string>", line 97, column 5
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
make: *** [Makefile:1414: dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1472993

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to

pip3 install dtschema --upgrade

Please check and re-submit.

More information about the openbmc mailing list