Question of phosphor-sel-logger

[Duke Du (杜祥嘉)]

> -----Original Message-----
> From: Matt Spinler <mspinler at linux.ibm.com>
> Sent: Wednesday, March 24, 2021 9:20 PM
> To: Duke Du (杜祥嘉) <Duke.Du at quantatw.com>; openbmc at lists.ozlabs.org
> Cc: vernon.mauery at linux.intel.com; jason.m.bills at linux.intel.com; Fran Hsu
> (徐誌謙) <Fran.Hsu at quantatw.com>; George Hung (洪忠敬)
> <George.Hung at quantatw.com>
> Subject: Re: Question of phosphor-sel-logger
> 
> 
> 
> On 3/24/2021 6:28 AM, Duke Du (杜祥嘉) wrote:
> > Hi all,
> >
> >       I used package phosphor-hwmon and phospor-sel-logger to
> monitor sensor and create log when sensor reading
> >     cross the threshold. I found after the commit
> 25b26e162bd109b51aa09b16f26f9aa3d9d940fa of phosphor-sel-logger
> >     would catch the signal "ThresholdAsserted" to create sensor threhold
> log in the journal, but the phosphor-hwmon
> >     would not send the signal "ThresholdAsserted" when sensor reading
> is abnormal so that phosphor-sel-logger
> >     would not create the sensor threhold log, am I right ?
> >
> >     If I'm right, can you give me some suggestion to fix this side effect, or
> what setting I have lost in the
> >     phosphor-hwmon or phosphor-sel-logger ?
> 
> Hi,
> That signal isn't defined in phosphor-dbus-interfaces, so phosphor-hwmon
> cannot use it.  When I tried to add it, it was rejected as-is with a
> recommendation to break it up into separate signals for each alarm property
> on each interface.  At that point I gave up and had the code I was working
> on at the time just look at propertiesChanged signals instead.
> 
> If you would like to take that up it would entail:
> * Update
> https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgerrit.
> openbmc-project.xyz%2Fc%2Fopenbmc%2Fphosphor-dbus-interfaces%2F%2B
> %2F39899&data=04%7C01%7CDuke.Du%40quantatw.com%7Cc5bf4d3d1
> 6f046cc6efa08d8eec78fd7%7C179b032707fc4973ac738de7313561b2%7C1%7
> C0%7C637521888783853893%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4w
> LjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&amp
> ;sdata=XoY4nKa3Go%2F9jt2coyzOcnXNrcMaw6XUtqnmK57k0ds%3D&res
> erved=0
> as requested
> * Update phosphor-hwmon to emit the new signals
> * Update phosphor-sel-logger to also listen for these new signals in addition
> to the  current one, or change the dbus-sensors code to only emit the new
> signals.
> 
> 

Hi Matt,

   Thanks for your reply, I want to add a event monitor to listen "signal PropertyChanged" for 
   "phosphor-phosphor-hwmon" only, like watchdog event monitor 
   (https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-sel-logger/+/37774), 
   I think this is a simple way to fix this side effect, what do you think about my thought ?
   
   Please feel free to give me some suggestion, thanks very much !

Thanks
Duke 

> >     phosphor-sel-logger commit
> 25b26e162bd109b51aa09b16f26f9aa3d9d940fa link :
> >
> > https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith
> >
> ub.com%2Fopenbmc%2Fphosphor-sel-logger%2Fcommit%2F25b26e162bd10
> 9b51aa0
> >
> 9b16f26f9aa3d9d940fa&data=04%7C01%7CDuke.Du%40quantatw.com%
> 7Cc5bf4
> >
> d3d16f046cc6efa08d8eec78fd7%7C179b032707fc4973ac738de7313561b2%7C
> 1%7C0
> >
> %7C637521888783853893%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjA
> wMDAiLCJQ
> >
> IjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=rHxKqIk
> Vg7
> > yQXmqvjXal7I6eVBzw3ifl26gsZF8o4xo%3D&reserved=0
> >
> >     Thanks very much !
> >     Duke