[PATCH linux dev-5.10 08/35] ARM: dts: aspeed: rainier: Add leds on optional DASD cards
Joel Stanley
joel at jms.id.au
Fri Mar 12 11:10:39 AEDT 2021
On Mon, 8 Mar 2021 at 22:54, Eddie James <eajames at linux.ibm.com> wrote:
>
> From: Vishwanatha Subbanna <vishwa at linux.vnet.ibm.com>
>
> These cards are not hot pluggable and must be installed
> prior to boot. LEDs on these are controlled by PCA9552
> i2c expander
Again, use the PCA952x driver correctly.
>
> Signed-off-by: Vishwanatha Subbanna <vishwa at linux.vnet.ibm.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 425 +++++++++++++++++++
> 1 file changed, 425 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 32b63112091c..c507e8da101e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -634,6 +634,161 @@ tpm-wilson {
> };
> };
>
> + leds-optional-dasd-pyramid0 {
> + compatible = "gpio-leds";
> +
> + nvme0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme2 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme3 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme4 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme5 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme6 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme7 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca2 7 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds-optional-dasd-pyramid1 {
> + compatible = "gpio-leds";
> +
> + nvme8 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme9 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme10 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme11 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme12 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme13 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme14 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme15 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds-optional-dasd-pyramid2 {
> + compatible = "gpio-leds";
> +
> + nvme16 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme17 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme18 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme19 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme20 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme21 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme22 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + nvme23 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca4 7 GPIO_ACTIVE_LOW>;
> + };
> + };
> };
>
> &ehci1 {
> @@ -2269,6 +2424,96 @@ eeprom at 50 {
> compatible = "atmel,24c64";
> reg = <0x50>;
> };
> +
> + pca2: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> };
>
> &i2c14 {
> @@ -2278,6 +2523,96 @@ eeprom at 50 {
> compatible = "atmel,24c64";
> reg = <0x50>;
> };
> +
> + pca3: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> };
>
> &i2c15 {
> @@ -2287,6 +2622,96 @@ eeprom at 50 {
> compatible = "atmel,24c64";
> reg = <0x50>;
> };
> +
> + pca4: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> };
>
> &vuart1 {
> --
> 2.27.0
>
More information about the openbmc
mailing list