[PATCH 2/6] usb:gadget:mass-storage: refactoring the SCSI command handling
Igor Kononenko
i.kononenko at yadro.com
Sun Jun 27 07:18:15 AEST 2021
Implements a universal way to define SCSI commands and configure
precheck handlers.
Tested: By probing the USBGadget Mass-Storage on the YADRO VEGMAN
BMC(AST2500) sample, each SCSI command was sent through HOST->BMC; the
USBGadget MassStorage debug print showed all sent commands works
properly.
Signed-off-by: Igor Kononenko <i.kononenko at yadro.com>
---
drivers/usb/gadget/function/f_mass_storage.c | 540 +++++++++++--------
drivers/usb/gadget/function/storage_common.h | 5 +
2 files changed, 310 insertions(+), 235 deletions(-)
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index e9a7f87b4df3..c3fddee21b53 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -237,6 +237,137 @@ static const char fsg_string_interface[] = "Mass Storage";
#include "storage_common.h"
#include "f_mass_storage.h"
+
+/*------------------------------------------------------------------------*/
+
+/**
+ * @brief The handler of incoming CDB command
+ * @param cmd - SCSI command number
+ * @param callback - The callback of handle the incoming command
+ */
+#define CDB_REG_HANDLER(cmd, callback) \
+ .command = (cmd), .do_command = (callback), \
+ .type = CDB_HANDLER_COMMON, .name = (#cmd)
+
+/**
+ * @brief The handler of incoming CDB command
+ * @param cmd - SCSI command nubmer with fsg buffhd
+ * @param callback - The callback of handle the incoming command
+ */
+#define CDB_REG_HANDLER_BUFFHD(cmd, callback) \
+ .command = (cmd), .do_command_with_buffhd = (callback), \
+ .type = CDB_HANDLER_FSG_BUFFHD, .name = (#cmd)
+
+/**
+ * @see CDB_REG_CHECKER_DS
+ * @details Register CDB command without additional check handler.
+ */
+#define CDB_REG_NO_CHECKER(cmd, si, dir, req) \
+ .command = (cmd), .direction = (dir), .size_index = (si), \
+ .medium_required = (req), .do_check_command = NULL,
+
+/**
+ * @brief Register the CDB command checker, which checks an incoming command
+ * by specified criteria.
+ * This validator will take care of the specified data size (DS)
+ *
+ * @param cmd - SCSI command nubmer
+ * @param s - CDB command size in bytes
+ * @param si - The CDB command might have the recommended response size.
+ * This field indicates the size field index in the input CDB command
+ * buffer
+ * @param dir - Direction of data transfer of requested CDB command
+ * @param mask - Mask of relevant bytes in the input command buffer.
+ * The ordinal number of a bit in the mask indicates that a byte in the
+ * CDB command buffer might be present.
+ * If that ordinal number bit equals zero, only a zero value must be
+ * present in this original byte.
+ * @param req - Indicates that medium MUST be present or might be optional
+ * @param ds - If @param SI member is equal to @enum CDB_SIZE_MANUAL, than this
+ * field indicates the custom response buffer size
+ */
+#define CDB_REG_CHECKER_DS(cmd, s, si, dir, mask, req, ds) \
+ .command = (cmd), .size = (s), .size_index = (si), .direction = (dir), \
+ .valid_bytes_bitmask = (mask), .medium_required = (req), \
+ .data_size_manual = (ds), .do_check_command = &check_command
+
+/**
+ * @see CDB_REG_CHECKER_DS
+ * @details The data size is zero.
+ * This macro can't be used with the @enum CDB_SIZE_MANUAL
+ */
+#define CDB_REG_CHECKER(cmd, s, si, dir, mask, req) \
+ CDB_REG_CHECKER_DS(cmd, s, si, dir, mask, req, 0)
+
+/**
+ * @see CDB_REG_CHECKER_DS
+ * @details The checker which registried by this macros will validate the input
+ * data size in blocks.
+ * Block size specified by MSF interface type, in the curlun->blksize.
+ */
+#define CDB_REG_CHECKER_BLK(cmd, s, si, dir, mask, req) \
+ CDB_REG_CHECKER_DS(cmd, s, si, dir, mask, req, 0), \
+ .do_check_command = &check_command_size_in_blocks
+
+/**
+ * @brief Field index of possible data length of output buffer size, which
+ * contains in the input CDB command buffer
+ */
+enum cdb_data_size_field {
+ CDB_SIZE_MANUAL = -2,
+ CDB_NO_SIZE_FIELD = -1,
+ CDB_SIZE_FIELD_4 = 4,
+ CDB_SIZE_FIELD_6 = 6,
+ CDB_SIZE_FIELD_7 = 7,
+};
+
+/* Type of CDB command checker with associated data to check */
+struct cdb_command_check {
+ /* SCSI command number */
+ u8 command;
+ /* CDB command size */
+ size_t size;
+ /* Size field index in the input CDB command buffer */
+ enum cdb_data_size_field size_index;
+ /* CDB command data direction, @enum data_direction */
+ u8 direction;
+ /* Mask of expected meaningfull bytes in input CDB command buffer */
+ u32 valid_bytes_bitmask;
+ /* Is medium must be present or not */
+ u8 medium_required;
+ /* If data size is custom (the size_index is equal to CDB_SIZE_MANUAL),
+ * then this field indicates the output data size
+ */
+ u8 data_size_manual;
+ /* the CDB command checker */
+ int (*do_check_command)(struct fsg_common *common, int size,
+ enum data_direction direction,
+ unsigned int mask, int needs_medium,
+ const char *name);
+};
+
+/* CDB command hundler metadata */
+struct cdb_handler {
+ /* SCSI command number */
+ u8 command;
+ /**
+ * @brief the CDB command hundler
+ * @param fsg_common - FSG instance
+ */
+ int (*do_command)(struct fsg_common *common);
+ /**
+ * @brief The CDB command hundler with a fsg_buffhd specified
+ */
+ int (*do_command_with_buffhd)(struct fsg_common *common,
+ struct fsg_buffhd *bufhd);
+ /* CDB handler type to pick a relevant callback */
+ enum { CDB_HANDLER_COMMON, CDB_HANDLER_FSG_BUFFHD } type;
+ /* SCSI command ASCII name */
+ char *name;
+};
+
+/*------------------------------------------------------------------------*/
+
/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
static struct usb_string fsg_strings[] = {
{FSG_STRING_INTERFACE, fsg_string_interface},
@@ -1801,6 +1932,97 @@ static int check_command_size_in_blocks(struct fsg_common *common,
mask, needs_medium, name);
}
+static struct cdb_command_check cdb_checker_table[] = {
+ { CDB_REG_CHECKER(INQUIRY, 6, CDB_SIZE_FIELD_4, DATA_DIR_TO_HOST,
+ 0x0010, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(MODE_SELECT, 6, CDB_SIZE_FIELD_4, DATA_DIR_FROM_HOST,
+ 0x0012, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(MODE_SELECT_10, 10, CDB_SIZE_FIELD_7,
+ DATA_DIR_FROM_HOST, 0x0182, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(MODE_SENSE, 6, CDB_SIZE_FIELD_4, DATA_DIR_TO_HOST,
+ 0x0016, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(MODE_SENSE_10, 10, CDB_SIZE_FIELD_7, DATA_DIR_TO_HOST,
+ 0x186, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(ALLOW_MEDIUM_REMOVAL, 6, CDB_NO_SIZE_FIELD,
+ DATA_DIR_NONE, 0x0010, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER_BLK(READ_6, 6, CDB_SIZE_FIELD_4, DATA_DIR_TO_HOST,
+ 0x001E, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER_BLK(READ_10, 10, CDB_SIZE_FIELD_7, DATA_DIR_TO_HOST,
+ 0x01BE, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER_BLK(READ_12, 12, CDB_SIZE_FIELD_6, DATA_DIR_TO_HOST,
+ 0x03FE, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER_DS(READ_CAPACITY, 10, CDB_SIZE_MANUAL,
+ DATA_DIR_TO_HOST, 0x011E, MEDIUM_REQUIRED, 8) },
+ { CDB_REG_CHECKER(READ_HEADER, 10, CDB_SIZE_FIELD_7, DATA_DIR_TO_HOST,
+ 0x01BE, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER(READ_TOC, 10, CDB_SIZE_FIELD_7, DATA_DIR_TO_HOST,
+ 0x03C7, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER(READ_FORMAT_CAPACITIES, 10, CDB_SIZE_FIELD_7,
+ DATA_DIR_TO_HOST, 0x0180, MEDIUM_REQUIRED) },
+
+ { CDB_REG_CHECKER(REQUEST_SENSE, 6, CDB_SIZE_FIELD_4, DATA_DIR_TO_HOST,
+ 0x0010, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(START_STOP, 6, CDB_NO_SIZE_FIELD, DATA_DIR_NONE,
+ 0x0012, MEDIUM_OPTIONAL) },
+ { CDB_REG_CHECKER(SYNCHRONIZE_CACHE, 10, CDB_NO_SIZE_FIELD,
+ DATA_DIR_NONE, 0x01BC, MEDIUM_REQUIRED) },
+
+ { CDB_REG_CHECKER(TEST_UNIT_READY, 6, CDB_NO_SIZE_FIELD, DATA_DIR_NONE,
+ 0x0000, MEDIUM_REQUIRED) },
+
+ { CDB_REG_CHECKER_BLK(VERIFY, 10, CDB_NO_SIZE_FIELD, DATA_DIR_NONE,
+ 0x0000, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER_BLK(WRITE_6, 6, CDB_SIZE_FIELD_4, DATA_DIR_FROM_HOST,
+ 0x001E, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER_BLK(WRITE_10, 10, CDB_SIZE_FIELD_7,
+ DATA_DIR_FROM_HOST, 0x01BE, MEDIUM_REQUIRED) },
+ { CDB_REG_CHECKER_BLK(WRITE_12, 12, CDB_SIZE_FIELD_6,
+ DATA_DIR_FROM_HOST, 0x03FE, MEDIUM_REQUIRED) },
+};
+
+static struct cdb_handler cdb_handlers_table[] = {
+ { CDB_REG_HANDLER_BUFFHD(INQUIRY, &do_inquiry) },
+ { CDB_REG_HANDLER_BUFFHD(MODE_SELECT, &do_mode_select) },
+ { CDB_REG_HANDLER_BUFFHD(MODE_SELECT_10, &do_mode_select) },
+ { CDB_REG_HANDLER_BUFFHD(MODE_SENSE, &do_mode_sense) },
+ { CDB_REG_HANDLER_BUFFHD(MODE_SENSE_10, &do_mode_sense) },
+ { CDB_REG_HANDLER(ALLOW_MEDIUM_REMOVAL, &do_prevent_allow) },
+ { CDB_REG_HANDLER(READ_6, &do_read) },
+ { CDB_REG_HANDLER(READ_10, &do_read) },
+ { CDB_REG_HANDLER(READ_12, &do_read) },
+ { CDB_REG_HANDLER_BUFFHD(READ_CAPACITY, &do_read_capacity) },
+ { CDB_REG_HANDLER_BUFFHD(READ_HEADER, &do_read_header) },
+ { CDB_REG_HANDLER_BUFFHD(READ_TOC, &do_read_toc) },
+ { CDB_REG_HANDLER_BUFFHD(READ_FORMAT_CAPACITIES, &do_read_format_capacities) },
+
+ { CDB_REG_HANDLER_BUFFHD(REQUEST_SENSE, &do_request_sense) },
+ { CDB_REG_HANDLER(START_STOP, &do_start_stop) },
+ { CDB_REG_HANDLER(SYNCHRONIZE_CACHE, &do_synchronize_cache) },
+ { CDB_REG_HANDLER(TEST_UNIT_READY, NULL) },
+
+ /*
+ * Although optional, this command is used by MS-Windows. We
+ * support a minimal version: BytChk must be 0.
+ */
+
+ { CDB_REG_HANDLER(VERIFY, do_verify) },
+ { CDB_REG_HANDLER(WRITE_6, do_write) },
+ { CDB_REG_HANDLER(WRITE_10, do_write) },
+ { CDB_REG_HANDLER(WRITE_12, do_write) },
+ /*
+ * Some mandatory commands that we recognize but don't implement.
+ * They don't mean much in this setting. It's left as an exercise
+ * for anyone interested to implement RESERVE and RELEASE in terms
+ * of Posix locks.
+ *
+ * Commands:
+ * FORMAT_UNIT
+ * RELEASE
+ * RESERVE
+ * SEND_DIAGNOSTIC
+ */
+};
+
static int do_scsi_command(struct fsg_common *common)
{
struct fsg_buffhd *bh;
@@ -1811,6 +2033,14 @@ static int do_scsi_command(struct fsg_common *common)
dump_cdb(common);
+ /* The size of both handlers and SCSI-checkers tables must be equal */
+ if (WARN(ARRAY_SIZE(cdb_checker_table) !=
+ ARRAY_SIZE(cdb_handlers_table),
+ "The checkers and handlers tables length are not matched!\n")) {
+ pr_err("Invalid cdb handlers initialization.\n");
+ return status;
+ }
+
/* Wait for the next buffer to become available for data or status */
bh = common->next_buffhd_to_fill;
common->next_buffhd_to_drain = bh;
@@ -1825,243 +2055,84 @@ static int do_scsi_command(struct fsg_common *common)
/* flash all unhandled data */
common->data_size_to_handle = 0;
- switch (common->cmnd[0]) {
+ for (i = 0; i < ARRAY_SIZE(cdb_checker_table); ++i) {
+ const struct cdb_command_check *curr_check =
+ &cdb_checker_table[i];
+ const struct cdb_handler *curr_handler = &cdb_handlers_table[i];
- case INQUIRY:
- common->data_size_from_cmnd = common->cmnd[4];
- status = check_command(common, 6, DATA_DIR_TO_HOST,
- (1<<4), 0,
- "INQUIRY");
- if (status == 0)
- status = do_inquiry(common, bh);
- break;
-
- case MODE_SELECT:
- common->data_size_from_cmnd = common->cmnd[4];
- status = check_command(common, 6, DATA_DIR_FROM_HOST,
- (1<<1) | (1<<4), 0,
- "MODE SELECT(6)");
- if (status == 0)
- status = do_mode_select(common, bh);
- break;
-
- case MODE_SELECT_10:
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command(common, 10, DATA_DIR_FROM_HOST,
- (1<<1) | (3<<7), 0,
- "MODE SELECT(10)");
- if (status == 0)
- status = do_mode_select(common, bh);
- break;
-
- case MODE_SENSE:
- common->data_size_from_cmnd = common->cmnd[4];
- status = check_command(common, 6, DATA_DIR_TO_HOST,
- (1<<1) | (1<<2) | (1<<4), 0,
- "MODE SENSE(6)");
- if (status == 0)
- status = do_mode_sense(common, bh);
- break;
-
- case MODE_SENSE_10:
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command(common, 10, DATA_DIR_TO_HOST,
- (1<<1) | (1<<2) | (3<<7), 0,
- "MODE SENSE(10)");
- if (status == 0)
- status = do_mode_sense(common, bh);
- break;
-
- case ALLOW_MEDIUM_REMOVAL:
- common->data_size_from_cmnd = 0;
- status = check_command(common, 6, DATA_DIR_NONE,
- (1<<4), 0,
- "PREVENT-ALLOW MEDIUM REMOVAL");
- if (status == 0)
- status = do_prevent_allow(common);
- break;
-
- case READ_6:
- i = common->cmnd[4];
- common->data_size_from_cmnd = (i == 0) ? 256 : i;
- status = check_command_size_in_blocks(common, 6,
- DATA_DIR_TO_HOST,
- (7<<1) | (1<<4), 1,
- "READ(6)");
- if (status == 0)
- status = do_read(common);
- break;
-
- case READ_10:
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command_size_in_blocks(common, 10,
- DATA_DIR_TO_HOST,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "READ(10)");
- if (status == 0)
- status = do_read(common);
- break;
-
- case READ_12:
- common->data_size_from_cmnd =
- get_unaligned_be32(&common->cmnd[6]);
- status = check_command_size_in_blocks(common, 12,
- DATA_DIR_TO_HOST,
- (1<<1) | (0xf<<2) | (0xf<<6), 1,
- "READ(12)");
- if (status == 0)
- status = do_read(common);
- break;
-
- case READ_CAPACITY:
- common->data_size_from_cmnd = 8;
- status = check_command(common, 10, DATA_DIR_TO_HOST,
- (0xf<<2) | (1<<8), 1,
- "READ CAPACITY");
- if (status == 0)
- status = do_read_capacity(common, bh);
- break;
-
- case READ_HEADER:
- if (!common->curlun || !common->curlun->cdrom)
- goto unknown_cmnd;
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command(common, 10, DATA_DIR_TO_HOST,
- (3<<7) | (0x1f<<1), 1,
- "READ HEADER");
- if (status == 0)
- status = do_read_header(common, bh);
- break;
-
- case READ_TOC:
- if (!common->curlun || !common->curlun->cdrom)
- goto unknown_cmnd;
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command(common, 10, DATA_DIR_TO_HOST,
- (7<<6) | (1<<1), 1,
- "READ TOC");
- if (status == 0)
- status = do_read_toc(common, bh);
- break;
-
- case READ_FORMAT_CAPACITIES:
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command(common, 10, DATA_DIR_TO_HOST,
- (3<<7), 1,
- "READ FORMAT CAPACITIES");
- if (status == 0)
- status = do_read_format_capacities(common, bh);
- break;
-
- case REQUEST_SENSE:
- common->data_size_from_cmnd = common->cmnd[4];
- status = check_command(common, 6, DATA_DIR_TO_HOST,
- (1<<4), 0,
- "REQUEST SENSE");
- if (status == 0)
- status = do_request_sense(common, bh);
- break;
-
- case START_STOP:
- common->data_size_from_cmnd = 0;
- status = check_command(common, 6, DATA_DIR_NONE,
- (1<<1) | (1<<4), 0,
- "START-STOP UNIT");
- if (status == 0)
- status = do_start_stop(common);
- break;
-
- case SYNCHRONIZE_CACHE:
- common->data_size_from_cmnd = 0;
- status = check_command(common, 10, DATA_DIR_NONE,
- (0xf<<2) | (3<<7), 1,
- "SYNCHRONIZE CACHE");
- if (status == 0)
- status = do_synchronize_cache(common);
- break;
-
- case TEST_UNIT_READY:
- common->data_size_from_cmnd = 0;
- status = check_command(common, 6, DATA_DIR_NONE,
- 0, 1,
- "TEST UNIT READY");
- break;
-
- /*
- * Although optional, this command is used by MS-Windows. We
- * support a minimal version: BytChk must be 0.
- */
- case VERIFY:
- common->data_size_from_cmnd = 0;
- status = check_command(common, 10, DATA_DIR_NONE,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "VERIFY");
- if (status == 0)
- status = do_verify(common);
- break;
-
- case WRITE_6:
- i = common->cmnd[4];
- common->data_size_from_cmnd = (i == 0) ? 256 : i;
- status = check_command_size_in_blocks(common, 6,
- DATA_DIR_FROM_HOST,
- (7<<1) | (1<<4), 1,
- "WRITE(6)");
- if (status == 0)
- status = do_write(common);
- break;
-
- case WRITE_10:
- common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]);
- status = check_command_size_in_blocks(common, 10,
- DATA_DIR_FROM_HOST,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "WRITE(10)");
- if (status == 0)
- status = do_write(common);
- break;
-
- case WRITE_12:
- common->data_size_from_cmnd =
- get_unaligned_be32(&common->cmnd[6]);
- status = check_command_size_in_blocks(common, 12,
- DATA_DIR_FROM_HOST,
- (1<<1) | (0xf<<2) | (0xf<<6), 1,
- "WRITE(12)");
- if (status == 0)
- status = do_write(common);
- break;
-
- /*
- * Some mandatory commands that we recognize but don't implement.
- * They don't mean much in this setting. It's left as an exercise
- * for anyone interested to implement RESERVE and RELEASE in terms
- * of Posix locks.
- */
- case FORMAT_UNIT:
- case RELEASE:
- case RESERVE:
- case SEND_DIAGNOSTIC:
-
- default:
-unknown_cmnd:
- common->data_size_from_cmnd = 0;
- sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
- status = check_command(common, common->cmnd_size,
- DATA_DIR_UNKNOWN, ~0, 0, unknown);
- if (status == 0) {
- common->curlun->sense_data = SS_INVALID_COMMAND;
- status = -EINVAL;
+ if (common->cmnd[0] != curr_check->command)
+ continue;
+ if (WARN(curr_check->command != curr_handler->command,
+ "Invalid CDB handlers initialization. Command not matches\n")) {
+ goto end;
}
- break;
+
+ // The command was matched. Go to processing
+ switch (curr_check->size_index) {
+ case CDB_NO_SIZE_FIELD:
+ common->data_size_from_cmnd = 0;
+ break;
+ case CDB_SIZE_FIELD_4:
+ common->data_size_from_cmnd =
+ (common->cmnd[CDB_SIZE_FIELD_4] == 0) ?
+ 0xFF :
+ common->cmnd[CDB_SIZE_FIELD_4];
+ break;
+ case CDB_SIZE_FIELD_6:
+ common->data_size_from_cmnd =
+ get_unaligned_be32(&common->cmnd[CDB_SIZE_FIELD_6]);
+ break;
+ case CDB_SIZE_FIELD_7:
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[CDB_SIZE_FIELD_7]);
+ break;
+ case CDB_SIZE_MANUAL:
+ common->data_size_from_cmnd =
+ curr_check->data_size_manual;
+ break;
+ default:
+ // should never happen
+ pr_err("error of get kind size field\n");
+ goto end;
+ }
+
+ if (curr_check->do_check_command) {
+ status = curr_check->do_check_command(common,
+ curr_check->size, curr_check->direction,
+ curr_check->valid_bytes_bitmask,
+ curr_check->medium_required,
+ curr_handler->name);
+ } else {
+ DBG(common, "SCSI command: %s\n", curr_handler->name);
+ status = 0;
+ }
+
+ if (status == 0) {
+ if (curr_handler->type == CDB_HANDLER_COMMON &&
+ curr_handler->do_command) {
+ status = curr_handler->do_command(common);
+ } else if (curr_handler->type ==
+ CDB_HANDLER_FSG_BUFFHD &&
+ curr_handler->do_command_with_buffhd !=
+ NULL) {
+ status =
+ curr_handler->do_command_with_buffhd(common, bh);
+ }
+ }
+
+ goto end;
}
+
+ common->data_size_from_cmnd = 0;
+ sprintf(unknown, "Unknown %02Xh", common->cmnd[0]);
+ status = check_command(common, common->cmnd_size, DATA_DIR_UNKNOWN, ~0,
+ MEDIUM_OPTIONAL, unknown);
+ if (status == 0) {
+ common->curlun->sense_data = SS_INVALID_COMMAND;
+ status = -EINVAL;
+ }
+
+end:
up_read(&common->filesem);
if (status == -EINTR || signal_pending(current))
@@ -2082,7 +2153,6 @@ static int do_scsi_command(struct fsg_common *common)
return 0;
}
-
/*-------------------------------------------------------------------------*/
static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h
index bdeb1e233fc9..84f5d2ffd7d8 100644
--- a/drivers/usb/gadget/function/storage_common.h
+++ b/drivers/usb/gadget/function/storage_common.h
@@ -172,6 +172,11 @@ enum data_direction {
DATA_DIR_NONE
};
+enum medium_required_values {
+ MEDIUM_OPTIONAL = 0,
+ MEDIUM_REQUIRED
+};
+
static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
{
return container_of(dev, struct fsg_lun, dev);
--
2.32.0
More information about the openbmc
mailing list