[PATCH u-boot v2019.04-aspeed-openbmc v2 3/6] ast2600: Allow selection of SPL boot devices

[Joel Stanley]

The AST2600 SPL can boot from a number of sources, with or without the
AST2600 secure boot feature. It may be desirable to disable some of
these, so put them behind the defines for the drivers that are used.

Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 arch/arm/mach-aspeed/ast2600/Kconfig    | 12 ++++++++++++
 arch/arm/mach-aspeed/ast2600/spl_boot.c |  9 +++++++++
 2 files changed, 21 insertions(+)

diff --git a/arch/arm/mach-aspeed/ast2600/Kconfig b/arch/arm/mach-aspeed/ast2600/Kconfig
index dd991e87c795..518f41b558d3 100644
--- a/arch/arm/mach-aspeed/ast2600/Kconfig
+++ b/arch/arm/mach-aspeed/ast2600/Kconfig
@@ -53,6 +53,18 @@ config TARGET_SLT_AST2600
 
 endchoice
 
+config ASPEED_SECBOOT_BL2
+	bool "ASPEED secure boot BL2 support"
+	depends on ASPEED_AST2600
+	help
+	  Enable ASPEED's "secboot" secure boot support for verifying
+	  the SPL's playload ("BL2").
+
+	  Enable this is if you're using secure boot support in the AST2600 (or similar)
+	  to verify your u-boot proper.
+
+	  Disable this is if you are using u-boot's vboot to verify u-boot.
+
 source "board/aspeed/evb_ast2600a0/Kconfig"
 source "board/aspeed/evb_ast2600a1/Kconfig"
 source "board/aspeed/ncsi_ast2600a0/Kconfig"
diff --git a/arch/arm/mach-aspeed/ast2600/spl_boot.c b/arch/arm/mach-aspeed/ast2600/spl_boot.c
index 58a22f646e08..98cf72bf440d 100644
--- a/arch/arm/mach-aspeed/ast2600/spl_boot.c
+++ b/arch/arm/mach-aspeed/ast2600/spl_boot.c
@@ -42,6 +42,7 @@ static int aspeed_secboot_spl_ram_load_image(struct spl_image_info *spl_image,
 }
 SPL_LOAD_IMAGE_METHOD("RAM with Aspeed Secure Boot", 0, ASPEED_SECBOOT_DEVICE_RAM, aspeed_secboot_spl_ram_load_image);
 
+#if IS_ENABLED(CONFIG_SPL_MMC_SUPPORT)
 static int aspeed_spl_mmc_load_image(struct spl_image_info *spl_image,
 				      struct spl_boot_device *bootdev)
 {
@@ -101,6 +102,7 @@ static int aspeed_spl_mmc_load_image(struct spl_image_info *spl_image,
 }
 SPL_LOAD_IMAGE_METHOD("MMC", 0, ASPEED_BOOT_DEVICE_MMC, aspeed_spl_mmc_load_image);
 
+#if IS_ENABLED(ASPEED_SECBOOT_BL2)
 static int aspeed_secboot_spl_mmc_load_image(struct spl_image_info *spl_image,
 				      struct spl_boot_device *bootdev)
 {
@@ -161,7 +163,10 @@ static int aspeed_secboot_spl_mmc_load_image(struct spl_image_info *spl_image,
 	return 0;
 }
 SPL_LOAD_IMAGE_METHOD("MMC with Aspeed Secure Boot", 0, ASPEED_SECBOOT_DEVICE_MMC, aspeed_secboot_spl_mmc_load_image);
+#endif /* ASPEED_SECBOOT_BL2 */
+#endif
 
+#if IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT)
 static int getcymodem(void)
 {
 	if (tstc())
@@ -204,6 +209,8 @@ end_stream:
 }
 SPL_LOAD_IMAGE_METHOD("UART", 0, ASPEED_BOOT_DEVICE_UART, aspeed_spl_ymodem_load_image);
 
+
+#if IS_ENABLED(ASPEED_SECBOOT_BL2)
 static int aspeed_secboot_spl_ymodem_load_image(struct spl_image_info *spl_image,
 		struct spl_boot_device *bootdev)
 {
@@ -245,3 +252,5 @@ end_stream:
 	return ret;
 }
 SPL_LOAD_IMAGE_METHOD("UART with Aspeed Secure Boot", 0, ASPEED_SECBOOT_DEVICE_UART, aspeed_secboot_spl_ymodem_load_image);
+#endif /* ASPEED_SECBOOT_BL2 */
+#endif
-- 
2.29.2