[PATCH linux dev-5.8] Support Hwmon ADM1266 Driver
Joel Stanley
joel at jms.id.au
Mon Jan 11 14:20:44 AEDT 2021
On Wed, 30 Dec 2020 at 15:55, Lancelot Kao <lancelot.kao at fii-usa.com> wrote:
>
> From: mustafa <mustafa.shehabi at fii-na.com>
>
> This hwmon/pmbus driver supports ADM1266 device
> It modified from linux kernel 5.10 and Fii modified
> it to fit openbmc kernel 5.8
>
> Signed-off-by: Mustafa Shehabi <Mustafa.shehabi at fii-na.com>
I've merged this to dev-5.8 with a slightly modified commit message.
Thanks for doing the backporting.
Cheers,
Joel
> ---
> .../bindings/hwmon/adi,adm1266.yaml | 51 ++
> Documentation/hwmon/adm1266.rst | 37 ++
> Documentation/hwmon/index.rst | 1 +
> drivers/hwmon/pmbus/Kconfig | 11 +
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/adm1266.c | 513 ++++++++++++++++++
> 6 files changed, 614 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> create mode 100644 Documentation/hwmon/adm1266.rst
> create mode 100644 drivers/hwmon/pmbus/adm1266.c
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> new file mode 100644
> index 000000000000..d088c744d53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
> + Control and Fault Recording
> +
> +maintainers:
> + - Alexandru Tachici <alexandru.tachici at analog.com>
> +
> +description: |
> + Analog Devices ADM1266 Cascadable Super Sequencer with Margin
> + Control and Fault Recording.
> + https://www.analog.com/media/en/technical-documentation/d...
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adm1266
> +
> + reg:
> + description: |
> + I2C address of slave device.
> + items:
> + minimum: 0x40
> + maximum: 0x4F
> +
> + avcc-supply:
> + description: |
> + Phandle to the Avcc power supply.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adm1266 at 40 {
> + compatible = "adi,adm1266";
> + reg = <0x40>;
> + };
> + };
> +...
> diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
> new file mode 100644
> index 000000000000..c7e5b0fab381
> --- /dev/null
> +++ b/Documentation/hwmon/adm1266.rst
> @@ -0,0 +1,37 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver adm1266
> +=====================
> +
> +Supported chips:
> + * Analog Devices ADM1266
> + Prefix: 'adm1266'
> + Datasheet: https://www.analog.com/media/en/technical-documentation/d...
> +
> +Author: Alexandru Tachici <alexandru.tachici at analog.com>
> +
> +
> +Description
> +-----------
> +
> +This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
> +
> +ADM1266 is a sequencer that features voltage readback from 17 channels via an
> +integrated 12 bit SAR ADC, accessed using a PMBus interface.
> +
> +The driver is a client driver to the core PMBus driver. Please see
> +Documentation/hwmon/pmbus for details on PMBus client drivers.
> +
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported. Limits are read-write, history reset
> +attributes are write-only, all other attributes are read-only.
> +
> +inX_label "voutx"
> +inX_input Measured voltage.
> +inX_min Minimum Voltage.
> +inX_max Maximum voltage.
> +inX_min_alarm Voltage low alarm.
> +inX_max_alarm Voltage high alarm.
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 89e1a824021f..37e1925735c7 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -30,6 +30,7 @@ Hardware Monitoring Kernel Drivers
> adm1026
> adm1031
> adm1177
> + adm1266
> adm1275
> adm9240
> ads7828
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index ea516cec1d35..63b9d1ec200b 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -26,6 +26,17 @@ config SENSORS_PMBUS
> This driver can also be built as a module. If so, the module will
> be called pmbus.
>
> +config SENSORS_ADM1266
> + tristate "Analog Devices ADM1266 Sequencer"
> + select CRC8
> + depends on GPIOLIB
> + help
> + If you say yes here you get hardware monitoring support for Analog
> + Devices ADM1266 Cascadable Super Sequencer.
> +
> + This driver can also be built as a module. If so, the module will
> + be called adm1266.
> +
> config SENSORS_ADM1275
> tristate "Analog Devices ADM1275 and compatibles"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index c4b15db996ad..da41d22be1c9 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -5,6 +5,7 @@
>
> obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> +obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
> obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
> diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
> new file mode 100644
> index 000000000000..1d83c4f42eaf
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/adm1266.c
> @@ -0,0 +1,513 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ADM1266 - Cascadable Super Sequencer with Margin
> + * Control and Fault Recording
> + *
> + * Copyright 2020 Analog Devices Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/crc8.h>
> +#include <linux/debugfs.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c-smbus.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/nvmem-provider.h>
> +#include "pmbus.h"
> +#include <linux/slab.h>
> +#include <linux/timekeeping.h>
> +
> +#define ADM1266_BLACKBOX_CONFIG 0xD3
> +#define ADM1266_PDIO_CONFIG 0xD4
> +#define ADM1266_READ_STATE 0xD9
> +#define ADM1266_READ_BLACKBOX 0xDE
> +#define ADM1266_SET_RTC 0xDF
> +#define ADM1266_GPIO_CONFIG 0xE1
> +#define ADM1266_BLACKBOX_INFO 0xE6
> +#define ADM1266_PDIO_STATUS 0xE9
> +#define ADM1266_GPIO_STATUS 0xEA
> +
> +/* ADM1266 GPIO defines */
> +#define ADM1266_GPIO_NR 9
> +#define ADM1266_GPIO_FUNCTIONS(x) FIELD_GET(BIT(0), x)
> +#define ADM1266_GPIO_INPUT_EN(x) FIELD_GET(BIT(2), x)
> +#define ADM1266_GPIO_OUTPUT_EN(x) FIELD_GET(BIT(3), x)
> +#define ADM1266_GPIO_OPEN_DRAIN(x) FIELD_GET(BIT(4), x)
> +
> +/* ADM1266 PDIO defines */
> +#define ADM1266_PDIO_NR 16
> +#define ADM1266_PDIO_PIN_CFG(x) FIELD_GET(GENMASK(15, 13), x)
> +#define ADM1266_PDIO_GLITCH_FILT(x) FIELD_GET(GENMASK(12, 9), x)
> +#define ADM1266_PDIO_OUT_CFG(x) FIELD_GET(GENMASK(2, 0), x)
> +
> +#define ADM1266_BLACKBOX_OFFSET 0
> +#define ADM1266_BLACKBOX_SIZE 64
> +
> +#define ADM1266_PMBUS_BLOCK_MAX 255
> +
> +struct adm1266_data {
> + struct pmbus_driver_info info;
> + struct gpio_chip gc;
> + const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
> + struct i2c_client *client;
> + struct dentry *debugfs_dir;
> + struct nvmem_config nvmem_config;
> + struct nvmem_device *nvmem;
> + u8 *dev_mem;
> + struct mutex buf_mutex;
> + u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
> + u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
> +};
> +
> +static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
> + {
> + .name = "blackbox",
> + .offset = ADM1266_BLACKBOX_OFFSET,
> + .bytes = 2048,
> + },
> +};
> +
> +DECLARE_CRC8_TABLE(pmbus_crc_table);
> +
> +/*
> + * Different from Block Read as it sends data and waits for the slave to
> + * return a value dependent on that data. The protocol is simply a Write Block
> + * followed by a Read Block without the Read-Block command field and the
> + * Write-Block STOP bit.
> + */
> +static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len, u8 *data_w,
> + u8 *data_r)
> +{
> + struct i2c_client *client = data->client;
> + struct i2c_msg msgs[2] = {
> + {
> + .addr = client->addr,
> + .flags = I2C_M_DMA_SAFE,
> + .buf = data->write_buf,
> + .len = w_len + 2,
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD | I2C_M_DMA_SAFE,
> + .buf = data->read_buf,
> + .len = ADM1266_PMBUS_BLOCK_MAX + 2,
> + }
> + };
> + u8 addr;
> + u8 crc;
> + int ret;
> +
> + mutex_lock(&data->buf_mutex);
> +
> + msgs[0].buf[0] = cmd;
> + msgs[0].buf[1] = w_len;
> + memcpy(&msgs[0].buf[2], data_w, w_len);
> +
> + ret = i2c_transfer(client->adapter, msgs, 2);
> + if (ret != 2) {
> + if (ret >= 0)
> + ret = -EPROTO;
> +
> + mutex_unlock(&data->buf_mutex);
> +
> + return ret;
> + }
> +
> + if (client->flags & I2C_CLIENT_PEC) {
> + addr = i2c_8bit_addr_from_msg(&msgs[0]);
> + crc = crc8(pmbus_crc_table, &addr, 1, 0);
> + crc = crc8(pmbus_crc_table, msgs[0].buf, msgs[0].len, crc);
> +
> + addr = i2c_8bit_addr_from_msg(&msgs[1]);
> + crc = crc8(pmbus_crc_table, &addr, 1, crc);
> + crc = crc8(pmbus_crc_table, msgs[1].buf, msgs[1].buf[0] + 1, crc);
> +
> + if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
> + mutex_unlock(&data->buf_mutex);
> + return -EBADMSG;
> + }
> + }
> +
> + memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
> +
> + ret = msgs[1].buf[0];
> + mutex_unlock(&data->buf_mutex);
> +
> + return ret;
> +}
> +
> +static const unsigned int adm1266_gpio_mapping[ADM1266_GPIO_NR][2] = {
> + {1, 0},
> + {2, 1},
> + {3, 2},
> + {4, 8},
> + {5, 9},
> + {6, 10},
> + {7, 11},
> + {8, 6},
> + {9, 7},
> +};
> +
> +static const char *adm1266_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR] = {
> + "GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", "GPIO8",
> + "GPIO9", "PDIO1", "PDIO2", "PDIO3", "PDIO4", "PDIO5", "PDIO6",
> + "PDIO7", "PDIO8", "PDIO9", "PDIO10", "PDIO11", "PDIO12", "PDIO13",
> + "PDIO14", "PDIO15", "PDIO16",
> +};
> +
> +static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset)
> +{
> + struct adm1266_data *data = gpiochip_get_data(chip);
> + u8 read_buf[I2C_SMBUS_BLOCK_MAX + 1];
> + unsigned long pins_status;
> + unsigned int pmbus_cmd;
> + int ret;
> +
> + if (offset < ADM1266_GPIO_NR)
> + pmbus_cmd = ADM1266_GPIO_STATUS;
> + else
> + pmbus_cmd = ADM1266_PDIO_STATUS;
> +
> + ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf);
> + if (ret < 0)
> + return ret;
> +
> + pins_status = read_buf[0] + (read_buf[1] << 8);
> + if (offset < ADM1266_GPIO_NR)
> + return test_bit(adm1266_gpio_mapping[offset][1], &pins_status);
> +
> + return test_bit(offset - ADM1266_GPIO_NR, &pins_status);
> +}
> +
> +static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
> + unsigned long *bits)
> +{
> + struct adm1266_data *data = gpiochip_get_data(chip);
> + u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
> + unsigned long status;
> + unsigned int gpio_nr;
> + int ret;
> +
> + ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf);
> + if (ret < 0)
> + return ret;
> +
> + status = read_buf[0] + (read_buf[1] << 8);
> +
> + *bits = 0;
> + for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
> + if (test_bit(adm1266_gpio_mapping[gpio_nr][1], &status))
> + set_bit(gpio_nr, bits);
> + }
> +
> + ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, read_buf);
> + if (ret < 0)
> + return ret;
> +
> + status = read_buf[0] + (read_buf[1] << 8);
> +
> + *bits = 0;
> + for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
> + if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
> + set_bit(gpio_nr, bits);
> + }
> +
> + return 0;
> +}
> +
> +static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
> +{
> + struct adm1266_data *data = gpiochip_get_data(chip);
> + u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
> + unsigned long gpio_config;
> + unsigned long pdio_config;
> + unsigned long pin_cfg;
> + u8 write_cmd;
> + int ret;
> + int i;
> +
> + for (i = 0; i < ADM1266_GPIO_NR; i++) {
> + write_cmd = adm1266_gpio_mapping[i][1];
> + ret = adm1266_pmbus_block_xfer(data, ADM1266_GPIO_CONFIG, 1, &write_cmd, read_buf);
> + if (ret != 2)
> + return;
> +
> + gpio_config = read_buf[0];
> + seq_puts(s, adm1266_names[i]);
> +
> + seq_puts(s, " ( ");
> + if (!ADM1266_GPIO_FUNCTIONS(gpio_config)) {
> + seq_puts(s, "high-Z )\n");
> + continue;
> + }
> + if (ADM1266_GPIO_INPUT_EN(gpio_config))
> + seq_puts(s, "input ");
> + if (ADM1266_GPIO_OUTPUT_EN(gpio_config))
> + seq_puts(s, "output ");
> + if (ADM1266_GPIO_OPEN_DRAIN(gpio_config))
> + seq_puts(s, "open-drain )\n");
> + else
> + seq_puts(s, "push-pull )\n");
> + }
> +
> + write_cmd = 0xFF;
> + ret = adm1266_pmbus_block_xfer(data, ADM1266_PDIO_CONFIG, 1, &write_cmd, read_buf);
> + if (ret != 32)
> + return;
> +
> + for (i = 0; i < ADM1266_PDIO_NR; i++) {
> + seq_puts(s, adm1266_names[ADM1266_GPIO_NR + i]);
> +
> + pdio_config = read_buf[2 * i];
> + pdio_config += (read_buf[2 * i + 1] << 8);
> + pin_cfg = ADM1266_PDIO_PIN_CFG(pdio_config);
> +
> + seq_puts(s, " ( ");
> + if (!pin_cfg || pin_cfg > 5) {
> + seq_puts(s, "high-Z )\n");
> + continue;
> + }
> +
> + if (pin_cfg & BIT(0))
> + seq_puts(s, "output ");
> +
> + if (pin_cfg & BIT(1))
> + seq_puts(s, "input ");
> +
> + seq_puts(s, ")\n");
> + }
> +}
> +
> +static int adm1266_config_gpio(struct adm1266_data *data)
> +{
> + const char *name = dev_name(&data->client->dev);
> + char *gpio_name;
> + int ret;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) {
> + gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%x-%s",
> + data->client->addr, adm1266_names[i]);
> + if (!gpio_name)
> + return -ENOMEM;
> +
> + data->gpio_names[i] = gpio_name;
> + }
> +
> + data->gc.label = name;
> + data->gc.parent = &data->client->dev;
> + data->gc.owner = THIS_MODULE;
> + data->gc.base = -1;
> + data->gc.names = data->gpio_names;
> + data->gc.ngpio = ARRAY_SIZE(data->gpio_names);
> + data->gc.get = adm1266_gpio_get;
> + data->gc.get_multiple = adm1266_gpio_get_multiple;
> + data->gc.dbg_show = adm1266_gpio_dbg_show;
> +
> + ret = devm_gpiochip_add_data(&data->client->dev, &data->gc, data);
> + if (ret)
> + dev_err(&data->client->dev, "GPIO registering failed (%d)\n", ret);
> +
> + return ret;
> +}
> +
> +static int adm1266_state_read(struct seq_file *s, void *pdata)
> +{
> + struct device *dev = s->private;
> + struct i2c_client *client = to_i2c_client(dev);
> + int ret;
> +
> + ret = i2c_smbus_read_word_data(client, ADM1266_READ_STATE);
> + if (ret < 0)
> + return ret;
> +
> + seq_printf(s, "%d\n", ret);
> +
> + return 0;
> +}
> +
> +static void adm1266_init_debugfs(struct adm1266_data *data)
> +{
> + struct dentry *root;
> +
> + root = pmbus_get_debugfs_dir(data->client);
> + if (!root)
> + return;
> +
> + data->debugfs_dir = debugfs_create_dir(data->client->name, root);
> + if (!data->debugfs_dir)
> + return;
> +
> + debugfs_create_devm_seqfile(&data->client->dev, "sequencer_state", data->debugfs_dir,
> + adm1266_state_read);
> +}
> +
> +static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff)
> +{
> + int record_count;
> + char index;
> + u8 buf[5];
> + int ret;
> +
> + ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO, buf);
> + if (ret < 0)
> + return ret;
> +
> + if (ret != 4)
> + return -EIO;
> +
> + record_count = buf[3];
> +
> + for (index = 0; index < record_count; index++) {
> + ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff);
> + if (ret < 0)
> + return ret;
> +
> + if (ret != ADM1266_BLACKBOX_SIZE)
> + return -EIO;
> +
> + read_buff += ADM1266_BLACKBOX_SIZE;
> + }
> +
> + return 0;
> +}
> +
> +static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes)
> +{
> + struct adm1266_data *data = priv;
> + int ret;
> +
> + if (offset + bytes > data->nvmem_config.size)
> + return -EINVAL;
> +
> + if (offset == 0) {
> + memset(data->dev_mem, 0, data->nvmem_config.size);
> +
> + ret = adm1266_nvmem_read_blackbox(data, data->dev_mem);
> + if (ret) {
> + dev_err(&data->client->dev, "Could not read blackbox!");
> + return ret;
> + }
> + }
> +
> + memcpy(val, data->dev_mem + offset, bytes);
> +
> + return 0;
> +}
> +
> +static int adm1266_config_nvmem(struct adm1266_data *data)
> +{
> + data->nvmem_config.name = dev_name(&data->client->dev);
> + data->nvmem_config.dev = &data->client->dev;
> + data->nvmem_config.root_only = true;
> + data->nvmem_config.read_only = true;
> + data->nvmem_config.owner = THIS_MODULE;
> + data->nvmem_config.reg_read = adm1266_nvmem_read;
> + data->nvmem_config.cells = adm1266_nvmem_cells;
> + data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
> + data->nvmem_config.priv = data;
> + data->nvmem_config.stride = 1;
> + data->nvmem_config.word_size = 1;
> + data->nvmem_config.size = adm1266_nvmem_cells[0].bytes;
> +
> + data->dev_mem = devm_kzalloc(&data->client->dev, data->nvmem_config.size, GFP_KERNEL);
> + if (!data->dev_mem)
> + return -ENOMEM;
> +
> + data->nvmem = devm_nvmem_register(&data->client->dev, &data->nvmem_config);
> + if (IS_ERR(data->nvmem)) {
> + dev_err(&data->client->dev, "Could not register nvmem!");
> + return PTR_ERR(data->nvmem);
> + }
> +
> + return 0;
> +}
> +
> +static int adm1266_set_rtc(struct adm1266_data *data)
> +{
> + time64_t kt;
> + char write_buf[6];
> + int i;
> +
> + kt = ktime_get_seconds();
> +
> + memset(write_buf, 0, sizeof(write_buf));
> +
> + for (i = 0; i < 4; i++)
> + write_buf[2 + i] = (kt >> (i * 8)) & 0xFF;
> +
> + return i2c_smbus_write_block_data(data->client, ADM1266_SET_RTC, sizeof(write_buf),
> + write_buf);
> +}
> +
> +static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
> +{
> + struct adm1266_data *data;
> + int ret;
> + int i;
> +
> + data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->client = client;
> + data->info.pages = 17;
> + data->info.format[PSC_VOLTAGE_OUT] = linear;
> + for (i = 0; i < data->info.pages; i++)
> + data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> +
> + crc8_populate_msb(pmbus_crc_table, 0x7);
> + mutex_init(&data->buf_mutex);
> +
> + ret = adm1266_config_gpio(data);
> + if (ret < 0)
> + return ret;
> +
> + ret = adm1266_set_rtc(data);
> + if (ret < 0)
> + return ret;
> +
> + ret = adm1266_config_nvmem(data);
> + if (ret < 0)
> + return ret;
> +
> + ret = pmbus_do_probe(client, id, &data->info);
> + if (ret)
> + return ret;
> +
> + adm1266_init_debugfs(data);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id adm1266_of_match[] = {
> + { .compatible = "adi,adm1266" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, adm1266_of_match);
> +
> +static const struct i2c_device_id adm1266_id[] = {
> + { "adm1266", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, adm1266_id);
> +
> +static struct i2c_driver adm1266_driver = {
> + .driver = {
> + .name = "adm1266",
> + .of_match_table = adm1266_of_match,
> + },
> + .probe = adm1266_probe,
> + .remove = pmbus_do_remove,
> + .id_table = adm1266_id,
> +};
> +
> +module_i2c_driver(adm1266_driver);
> +
> +MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici at analog.com>");
> +MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
>
More information about the openbmc
mailing list