[PATCH 4/6] irqchip/aspeed: Add Aspeed eSPI interrupt controller
Marc Zyngier
maz at kernel.org
Wed Jan 6 21:59:25 AEDT 2021
On 2021-01-06 05:59, Chia-Wei, Wang wrote:
> The eSPI interrupt controller acts as a SW IRQ number
> decoder to correctly control/dispatch interrupts of
> the eSPI peripheral, virtual wire, out-of-band, and
> flash channels.
>
> Signed-off-by: Chia-Wei, Wang <chiawei_wang at aspeedtech.com>
> ---
> drivers/irqchip/Makefile | 2 +-
> drivers/irqchip/irq-aspeed-espi-ic.c | 251 ++++++++++++++++++++++++
> include/soc/aspeed/espi.h | 279 +++++++++++++++++++++++++++
> 3 files changed, 531 insertions(+), 1 deletion(-)
> create mode 100644 drivers/irqchip/irq-aspeed-espi-ic.c
> create mode 100644 include/soc/aspeed/espi.h
>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 0ac93bfaec61..56da4a3123f8 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -86,7 +86,7 @@ obj-$(CONFIG_MVEBU_PIC) += irq-mvebu-pic.o
> obj-$(CONFIG_MVEBU_SEI) += irq-mvebu-sei.o
> obj-$(CONFIG_LS_EXTIRQ) += irq-ls-extirq.o
> obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
> -obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o
> irq-aspeed-scu-ic.o
> +obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o
> irq-aspeed-scu-ic.o irq-aspeed-espi-ic.o
> obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
> obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
> obj-$(CONFIG_IRQ_UNIPHIER_AIDET) += irq-uniphier-aidet.o
> diff --git a/drivers/irqchip/irq-aspeed-espi-ic.c
> b/drivers/irqchip/irq-aspeed-espi-ic.c
> new file mode 100644
> index 000000000000..8a5cc8fe3f0c
> --- /dev/null
> +++ b/drivers/irqchip/irq-aspeed-espi-ic.c
> @@ -0,0 +1,251 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2020 Aspeed Technology Inc.
> + */
> +#include <linux/bitops.h>
> +#include <linux/module.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +
> +#include <soc/aspeed/espi.h>
> +#include <dt-bindings/interrupt-controller/aspeed-espi-ic.h>
> +
> +#define DEVICE_NAME "aspeed-espi-ic"
> +#define IRQCHIP_NAME "eSPI-IC"
> +
> +#define ESPI_IC_IRQ_NUM 7
> +
> +struct aspeed_espi_ic {
> + struct regmap *map;
> + int irq;
> + int gpio_irq;
> + struct irq_domain *irq_domain;
> +};
> +
> +static void aspeed_espi_ic_gpio_isr(struct irq_desc *desc)
> +{
> + unsigned int irq;
> + struct aspeed_espi_ic *espi_ic = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> +
> + chained_irq_enter(chip, desc);
> +
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_CTRL_RESET);
> + generic_handle_irq(irq);
> +
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_CHAN_RESET);
> + generic_handle_irq(irq);
So for each mux interrupt, you generate two endpoints interrupt,
without even checking whether they are pending? That's no good.
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void aspeed_espi_ic_isr(struct irq_desc *desc)
> +{
> + unsigned int sts;
> + unsigned int irq;
> + struct aspeed_espi_ic *espi_ic = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> +
> + chained_irq_enter(chip, desc);
> +
> + regmap_read(espi_ic->map, ESPI_INT_STS, &sts);
> +
> + if (sts & ESPI_INT_STS_PERIF_BITS) {
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_PERIF_EVENT);
> + generic_handle_irq(irq);
> + }
> +
> + if (sts & ESPI_INT_STS_VW_BITS) {
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_VW_EVENT);
> + generic_handle_irq(irq);
> + }
> +
> + if (sts & ESPI_INT_STS_OOB_BITS) {
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_OOB_EVENT);
> + generic_handle_irq(irq);
> + }
> +
> + if (sts & ESPI_INT_STS_FLASH_BITS) {
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_FLASH_EVENT);
> + generic_handle_irq(irq);
> + }
> +
> + if (sts & ESPI_INT_STS_HW_RST_DEASSERT) {
> + irq = irq_find_mapping(espi_ic->irq_domain,
> + ASPEED_ESPI_IC_CTRL_EVENT);
> + generic_handle_irq(irq);
> + }
This is horrible. Why can't you just use fls() in a loop?
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void aspeed_espi_ic_irq_disable(struct irq_data *data)
> +{
> + struct aspeed_espi_ic *espi_ic = irq_data_get_irq_chip_data(data);
> +
> + switch (data->hwirq) {
> + case ASPEED_ESPI_IC_CTRL_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_HW_RST_DEASSERT,
> + 0);
> + break;
> + case ASPEED_ESPI_IC_PERIF_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_PERIF_BITS, 0);
> + break;
> + case ASPEED_ESPI_IC_VW_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_VW_BITS, 0);
> + break;
> + case ASPEED_ESPI_IC_OOB_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_OOB_BITS, 0);
> + break;
> + case ASPEED_ESPI_IC_FLASH_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_FLASH_BITS, 0);
> + break;
> + }
Most of these are masking multiple events at once, which makes me
think that it really doesn't belong here...
> +}
> +
> +static void aspeed_espi_ic_irq_enable(struct irq_data *data)
> +{
> + struct aspeed_espi_ic *espi_ic = irq_data_get_irq_chip_data(data);
> +
> + switch (data->hwirq) {
> + case ASPEED_ESPI_IC_CTRL_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_HW_RST_DEASSERT,
> + ESPI_INT_EN_HW_RST_DEASSERT);
> + break;
> + case ASPEED_ESPI_IC_PERIF_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_PERIF_BITS,
> + ESPI_INT_EN_PERIF_BITS);
> + break;
> + case ASPEED_ESPI_IC_VW_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_VW_BITS,
> + ESPI_INT_EN_VW_BITS);
> + break;
> + case ASPEED_ESPI_IC_OOB_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_OOB_BITS,
> + ESPI_INT_EN_OOB_BITS);
> + break;
> + case ASPEED_ESPI_IC_FLASH_EVENT:
> + regmap_update_bits(espi_ic->map, ESPI_INT_EN,
> + ESPI_INT_EN_FLASH_BITS,
> + ESPI_INT_EN_FLASH_BITS);
> + break;
> + }
> +}
> +
> +static struct irq_chip aspeed_espi_ic_chip = {
> + .name = IRQCHIP_NAME,
> + .irq_enable = aspeed_espi_ic_irq_enable,
> + .irq_disable = aspeed_espi_ic_irq_disable,
> +};
> +
> +static int aspeed_espi_ic_map(struct irq_domain *domain, unsigned int
> irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_and_handler(irq, &aspeed_espi_ic_chip,
> handle_simple_irq);
> + irq_set_chip_data(irq, domain->host_data);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aspeed_espi_ic_domain_ops = {
> + .map = aspeed_espi_ic_map,
> +};
> +
> +static int aspeed_espi_ic_probe(struct platform_device *pdev)
> +{
> + struct device *dev;
> + struct aspeed_espi_ic *espi_ic;
> +
> + dev = &pdev->dev;
> +
> + espi_ic = devm_kzalloc(dev, sizeof(*espi_ic), GFP_KERNEL);
> + if (!espi_ic)
> + return -ENOMEM;
> +
> + espi_ic->map = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(espi_ic->map)) {
> + dev_err(dev, "cannot get regmap\n");
> + return -ENODEV;
> + }
> +
> + espi_ic->irq = platform_get_irq(pdev, 0);
> + if (espi_ic->irq < 0)
> + return espi_ic->irq;
> +
> + espi_ic->gpio_irq = platform_get_irq(pdev, 1);
> + if (espi_ic->gpio_irq < 0)
> + return espi_ic->gpio_irq;
> +
> + espi_ic->irq_domain = irq_domain_add_linear(dev->of_node,
> ESPI_IC_IRQ_NUM,
> + &aspeed_espi_ic_domain_ops,
> + espi_ic);
> + if (!espi_ic->irq_domain) {
> + dev_err(dev, "cannot to add irq domain\n");
> + return -ENOMEM;
> + }
> +
> + irq_set_chained_handler_and_data(espi_ic->irq,
> + aspeed_espi_ic_isr,
> + espi_ic);
> +
> + irq_set_chained_handler_and_data(espi_ic->gpio_irq,
> + aspeed_espi_ic_gpio_isr,
> + espi_ic);
> +
> + dev_set_drvdata(dev, espi_ic);
> +
> + dev_info(dev, "eSPI IRQ controller initialized\n");
> +
> + return 0;
> +}
> +
> +static int aspeed_espi_ic_remove(struct platform_device *pdev)
> +{
> + struct aspeed_espi_ic *espi_ic = platform_get_drvdata(pdev);
> +
> + irq_domain_remove(espi_ic->irq_domain);
> + return 0;
> +}
> +
> +static const struct of_device_id aspeed_espi_ic_of_matches[] = {
> + { .compatible = "aspeed,ast2600-espi-ic" },
> + { },
> +};
> +
> +static struct platform_driver aspeed_espi_ic_driver = {
> + .driver = {
> + .name = DEVICE_NAME,
> + .of_match_table = aspeed_espi_ic_of_matches,
> + },
> + .probe = aspeed_espi_ic_probe,
> + .remove = aspeed_espi_ic_remove,
> +};
> +
> +module_platform_driver(aspeed_espi_ic_driver);
> +
> +MODULE_AUTHOR("Chia-Wei Wang <chiawei_wang at aspeedtech.com>");
> +MODULE_AUTHOR("Ryan Chen <ryan_chen at aspeedtech.com>");
> +MODULE_DESCRIPTION("Aspeed eSPI interrupt controller");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/soc/aspeed/espi.h b/include/soc/aspeed/espi.h
> new file mode 100644
> index 000000000000..c9a4f51737ee
> --- /dev/null
> +++ b/include/soc/aspeed/espi.h
> @@ -0,0 +1,279 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2020 Aspeed Technology Inc.
> + * Author: Chia-Wei Wang <chiawei_wang at aspeedtech.com>
> + */
> +#ifndef _ASPEED_ESPI_H_
> +#define _ASPEED_ESPI_H_
[...]
If nothing else uses the data here, move it to the irqchip driver.
M.
--
Jazz is not dead. It just smells funny...
More information about the openbmc
mailing list