[PATCH linux dev-5.8 v1 10/11] dt-binding: bmc: add NPCM7XX JTAG master documentation

Tomer Maimon tmaimon77 at gmail.com
Fri Jan 1 23:23:27 AEDT 2021


Added device tree binding documentation for
Nuvoton NPCM7XX JTAG master.

Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
---
 .../bindings/bmc/npcm7xx-jtag-master.txt      | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bmc/npcm7xx-jtag-master.txt

diff --git a/Documentation/devicetree/bindings/bmc/npcm7xx-jtag-master.txt b/Documentation/devicetree/bindings/bmc/npcm7xx-jtag-master.txt
new file mode 100644
index 000000000000..3ad7a18ba9a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/bmc/npcm7xx-jtag-master.txt
@@ -0,0 +1,38 @@
+Nuvoton NPCM7xx JTAG MASTER interface
+
+Nuvoton BMC NPCM7xx JTAG Master is used for debugging host CPU or programming
+CPLD device. The driver is implemented as an SPI device driver that enabling
+the option to transfer JTAG data with the assistance of SPI HW.
+
+Required properties for jtag_master node
+- compatible		: "nuvoton,npcm750-jtag-master" for Poleg NPCM7XX.
+- spi-max-frequency	: specify the max spi bus frequency.
+- reg 				: always 0
+- pinctrl-names		: contain 2 pinctrl states "pspi" and "gpio", which indicates
+					  the TCK/TDI/TDO pin state in HW mode(using PSPI hw) and
+					  SW mode (using GPIO bitbang) respectively.
+- tck-gpios			: specify the GPIO number of TCK pin
+- tdi-gpios			: specify the GPIO number of TDI pin
+- tdo-gpios			: specify the GPIO number of TDO pin
+- tms-gpios			: specify the GPIO number of TMS pin
+
+Example:
+spi1: spi at 201000 {
+	...
+	jtag_master {
+		compatible = "nuvoton,npcm750-jtag-master";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+
+		pinctrl-names = "pspi", "gpio";
+		pinctrl-0 = <&pspi2_pins>;
+		pinctrl-1 = <&gpio17_pins &gpio18o_pins
+			&gpio19ol_pins>;
+
+		tck-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		tdi-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		tdo-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		tms-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
-- 
2.22.0



More information about the openbmc mailing list