Redfish v1/Systems/system/EthernetInterfaces

[Udupa.Ashwini ISV]

Thanks Ed.
So, only those implemented in "bmcweb/redfish-core/lib/"  are currently implemented in OpenBMC Redfish right?
I don’t see below implemented too:
Systems/system/BootOptions

But, are these implemented? 
1. Systems/system/NetworkInterfaces
2. Systems/system/PCIeFunctions
If so, what changes are needed to make these working?

Regards,
Ashwini

-----Original Message-----
From: Ed Tanous <ed at tanous.net> 
Sent: Wednesday, February 17, 2021 12:24 PM
To: Udupa.Ashwini ISV <udupa.ashwini at inventec.com>
Cc: openbmc at lists.ozlabs.org
Subject: Re: Redfish v1/Systems/system/EthernetInterfaces

On Wed, Feb 17, 2021 at 12:13 PM Udupa.Ashwini ISV <udupa.ashwini at inventec.com> wrote:
>
> Hi Ed,
>
>
>
> Its Inventec platform.
>
> https://github.com/openbmc/openbmc/tree/master/meta-inventec
>
> I just wanted to know how to implement /redfish/v1/Systems/system/EthernetInterfaces.

Excellent, that helps.  I originally misread, and thought the interface was missing on the platform, not that you were trying to add it to redfish.

>
>
>
> Regards,
>
> Ashwini

Please don't top post.

>
>
>
> From: Ed Tanous <ed at tanous.net>
> Sent: Saturday, February 13, 2021 10:18 AM
> To: Udupa.Ashwini ISV <udupa.ashwini at inventec.com>
> Cc: openbmc at lists.ozlabs.org
> Subject: Re: Redfish v1/Systems/system/EthernetInterfaces
>
>
>
>
>
>
>
> On Sat, Feb 13, 2021 at 10:11 AM Udupa.Ashwini ISV <udupa.ashwini at inventec.com> wrote:
>
>
>
> Hi,
>
>
>
> I am new to OpenBmc and Redfish.
>
> I saw in bmcweb/Redfish.md, that below Redfish is targeted for OpenBmc:

This doc is really old, and was originally written as an initial stab at what interfaces we should write.  Unfortunately, when it got converted into a "here's the interfaces we support today" doc, that path didn't get scrubbed.  We don't have an implementation of it today.  I can get a review open to update the doc.

>
> /redfish/v1/Systems/system/EthernetInterfaces
>
>
>
> But, in redfish-core/lib/systems.hpp, I don’t see EthernetInterfaces and I don’t see it on my server Redfish too.

Today, we don't have this implemented because we don't really have a path to get that information from the host.  Doing that would require either an in-band application running on the main processor to send new ip addresses to the bmc, or an NCSI, MCTP, or PLDM connection directly to the NIC that supported getting that level of information.
Both of which likely require a new daemon to expose those APIs to debug.

We do have /redfish/v1/Systems/hypervisor/EthernetInterfaces today.
We'd ideally want to follow very closely to what that does, expose a new path on DBus that implements the xyz.openbmc_project.Network.EthernetInterface interface, and grab the data from it.

>
>
>
> What upstream system are you trying this on?  If your platform isn’t upstream, can you point at the code review where you’re adding it?
>
>
>
> If you don’t have either, take note that it’s really difficult to help debug or make suggestions for platforms that we can’t see the code for.
>
>
>
> Its only present in Managers/bmc/EthernetInterfaces.
>
>
>
> How do I add Systems/system/EthernetInterfaces Redfish support? What changes do I need to make?
>
>
>
> Regards,
>
> Ashwini
>
>
>
> --
>
> -Ed