[PATCH 1/4] media: aspeed: Correct value for h-total-pixels
Joel Stanley
joel at jms.id.au
Wed Dec 22 11:54:09 AEDT 2021
On Fri, 17 Dec 2021 at 09:54, Jammy Huang <jammy_huang at aspeedtech.com> wrote:
>
> Previous reg-field, 0x98[11:0], stands for the period of the detected
> hsync signal.
> Use the correct reg, 0xa0, to get h-total in pixels.
>
> Signed-off-by: Jammy Huang <jammy_huang at aspeedtech.com>
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Reviewed-by: Joel Stanley <joel at jms.id.au>
> ---
> drivers/media/platform/aspeed-video.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index b388bc56ce81..d5f77b205175 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -166,7 +166,7 @@
> #define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
>
> #define VE_MODE_DETECT_STATUS 0x098
> -#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0)
> +#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0)
> #define VE_MODE_DETECT_V_LINES_SHF 16
> #define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
> #define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
> @@ -177,6 +177,8 @@
> #define VE_SYNC_STATUS_VSYNC_SHF 16
> #define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
>
> +#define VE_H_TOTAL_PIXELS 0x0A0
> +
> #define VE_INTERRUPT_CTRL 0x304
> #define VE_INTERRUPT_STATUS 0x308
> #define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
> @@ -938,6 +940,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> u32 src_lr_edge;
> u32 src_tb_edge;
> u32 sync;
> + u32 htotal;
> struct v4l2_bt_timings *det = &video->detected_timings;
>
> det->width = MIN_WIDTH;
> @@ -983,6 +986,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
> mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
> sync = aspeed_video_read(video, VE_SYNC_STATUS);
> + htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
>
> video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
> VE_SRC_TB_EDGE_DET_BOT_SHF;
> @@ -999,8 +1003,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> VE_SRC_LR_EDGE_DET_RT_SHF;
> video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
> det->hfrontporch = video->frame_left;
> - det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
> - video->frame_right;
> + det->hbackporch = htotal - video->frame_right;
> det->hsync = sync & VE_SYNC_STATUS_HSYNC;
> if (video->frame_left > video->frame_right)
> continue;
> --
> 2.25.1
>
More information about the openbmc
mailing list