[PATCH u-boot v2019.04-aspeed-openbmc 01/11] aspeed: Build secboot only when enabled

[Klaus Heinrich Kiwi]

On 4/13/2021 5:07 AM, Joel Stanley wrote:
> The configuration option controls if the secboot code is used. When
> there are no callers it is removed from the final u-boot binary. Instead
> of relying on the linker to do this, only add it to the build system if
> enabled.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
>   arch/arm/mach-aspeed/ast2600/Makefile | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-aspeed/ast2600/Makefile b/arch/arm/mach-aspeed/ast2600/Makefile
> index 0abac4c233e4..aafc4b2fe37f 100644
> --- a/arch/arm/mach-aspeed/ast2600/Makefile
> +++ b/arch/arm/mach-aspeed/ast2600/Makefile
> @@ -1,2 +1,3 @@
> -obj-y   += platform.o board_common.o scu_info.o utils.o cache.o crypto.o aspeed_verify.o
> +obj-y   += platform.o board_common.o scu_info.o utils.o cache.o
> +obj-$(CONFIG_ASPEED_SECURE_BOOT) += crypto.o aspeed_verify.o
>   obj-$(CONFIG_SPL_BUILD) += spl.o spl_boot.o
> 

Reviewed-by: Klaus Heinrich Kiwi <klaus at linux.vnet.ibm.com>

-- 
Klaus Heinrich Kiwi <klaus at linux.vnet.ibm.com>