回复：[External] Re: IPMI SEL Parsing

[许晓菡]

You can set EXTRA_OECONF += "ERROR_INFO_CAP=1000" in
phpsphor-logging_%,bbappend file to modify the max sel num for ipmitool sel
list

于2021年4月8日 (周四) 20:39 <rgrs at protonmail.com> 写道:

Hi Lei, I am still getting "undertermined system hardware failure" in
ipmitool sel list. Do you have any platforms to refer to (in upstream)?
ipmitool sel also list only 10 logging entries and rotates after that. Is
it expected? -Raj ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Friday, 2 April 2021
07:26, Lei Yu wrote: > On Thu, Apr 1, 2021 at 8:56 PM rgrs
rgrs at protonmail.com wrote: > > > Hi Lei, > > Is FRU EEPROM required for
inventory to work? My board has unprogrammed EEPROM. > > I constructed the
busctl command according as below, I still get “Undetermined Hardware
Failure”. Please can you let me know if my config YAML has any issues? > >
> > busctl call "xyz.openbmc_project.Logging.IPMI"
"/xyz/openbmc_project/Logging/IPMI" xyz.openbmc_project.Logging.IPMI
IpmiSelAdd ssaybq "Sensor message"
/xyz/openbmc_project/sensors/temperature/BMC_Temp 3 0x01 0xFF 0xFF true
0x20 > > > >
====================================================================================================================================================================================================================================
> > You need to put /xyz/openbmc_project/sensors/temperature/BMC_Temp into
> sp3-ipmi-inventory-sensors.yaml as well to make ipmid to know how to >
map the dbus path to the sensor id in the sel.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20210409/d2cf89cc/attachment-0001.htm>