[PATCH 3/3] ARM: dts: aspeed: add ASRock E3C246D4I BMC

Zev Weiss zev at bewilderbeest.net
Thu Apr 1 11:26:41 AEDT 2021


On Wed, Mar 31, 2021 at 07:04:51PM CDT, Andrew Jeffery wrote:
>
>
>On Tue, 30 Mar 2021, at 10:53, Zev Weiss wrote:
>> This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
>> mini-ITX board that we hope can provide a decent platform for OpenBMC
>> development.
>>
>> This initial device-tree provides the necessary configuration for
>> basic BMC functionality such as host power control, serial console and
>> KVM support, and POST code snooping.
>>
>> Signed-off-by: Zev Weiss <zev at bewilderbeest.net>
>> ---
>>  .../boot/dts/aspeed-bmc-asrock-e3c246d4i.dts  | 188 ++++++++++++++++++
>>  1 file changed, 188 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
>>
>> diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
>> b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
>> new file mode 100644
>> index 000000000000..27b34c3cf67a
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
>> @@ -0,0 +1,188 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/dts-v1/;
>> +
>> +#include "aspeed-g5.dtsi"
>> +#include <dt-bindings/gpio/aspeed-gpio.h>
>> +#include <dt-bindings/i2c/i2c.h>
>> +
>> +/{
>> +	model = "ASRock E3C246D4I BMC";
>> +	compatible = "aspeed,ast2500";
>> +
>> +	aliases {
>> +		serial4 = &uart5;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = &uart5;
>> +		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
>> +	};
>> +
>> +	memory at 80000000 {
>> +		reg = <0x80000000 0x20000000>;
>> +	};
>> +
>> +	leds {
>> +		compatible = "gpio-leds";
>> +
>> +		heartbeat {
>> +			/* BMC_HB_LED_N */
>> +			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
>> +			linux,default-trigger = "timer";
>> +		};
>> +
>> +		system-fault {
>> +			/* SYSTEM_FAULT_LED_N */
>> +			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
>> +			panic-indicator;
>> +		};
>> +	};
>> +
>> +	gpio-keys {
>> +		compatible = "gpio-keys";
>> +
>> +		uid-button {
>> +			label = "uid-button";
>> +			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
>> +			linux,code = <ASPEED_GPIO(F, 1)>;
>> +		};
>> +	};
>> +
>> +	iio-hwmon {
>> +		compatible = "iio-hwmon";
>> +		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
>> +			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
>> +			<&adc 10>, <&adc 11>, <&adc 12>;
>> +	};
>> +};
>
>You're hooking up the ADC lines to the iio-hwmon bridge...
>> +
>> +&adc {
>> +	status = "okay";
>> +};
>
>But you haven't requested the ADC lines from pinmux here.
>
>It will *happen* to work as expected because ADC is the default mux
>state for the pins, but by not requesting the lines you're leaving the
>pins available for a conflicting request, which can be annoying to
>debug.
>

Ack, thanks -- will fix & resend.

>> +
>> +&kcs3 {
>> +	status = "okay";
>> +	aspeed,lpc-io-reg = <0xca2>;
>> +};
>
>Given you need KCS support, do you mind testing my KCS series?
>
>https://lore.kernel.org/linux-arm-kernel/20210319062752.145730-1-andrew@aj.id.au/
>

Sure, I'll try to give that a shot and report back in the next day or 
two.

>The cover letter got detached, and is here:
>
>https://lore.kernel.org/linux-arm-kernel/20210319061952.145040-1-andrew@aj.id.au/
>
>Andrew


More information about the openbmc mailing list