[PATCH u-boot v2019.04-aspeed-openbmc 5/5] configs: AST2600 Openbmc: Update config for eMMC boot

[Eddie James]

Set some additional parameters to boot eMMC.

Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
 configs/ast2600_openbmc_spl_defconfig | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/configs/ast2600_openbmc_spl_defconfig b/configs/ast2600_openbmc_spl_defconfig
index c2e3393708..86e3ea289d 100644
--- a/configs/ast2600_openbmc_spl_defconfig
+++ b/configs/ast2600_openbmc_spl_defconfig
@@ -3,9 +3,10 @@ CONFIG_SYS_CONFIG_NAME="evb_ast2600a1_spl"
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_POSITION_INDEPENDENT=y
 CONFIG_SPL_SYS_THUMB_BUILD=y
+CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
 CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/mach-aspeed/ast2600/u-boot-spl.lds"
 CONFIG_ARCH_ASPEED=y
-CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_SYS_TEXT_BASE=0x8b000000
 CONFIG_ASPEED_AST2600=y
 CONFIG_TARGET_EVB_AST2600A1=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -33,8 +34,9 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_ARCH_EARLY_INIT_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=1
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
@@ -80,6 +82,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 CONFIG_REGMAP=y
 CONFIG_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_DM_GPIO=y
-- 
2.26.2