[PATCH linux dev-5.8] ARM: dts: aspeed: rainier: Set MAX31785 config

[Joel Stanley]

On Tue, 24 Nov 2020 at 04:49, Matthew Barth <msbarth at linux.ibm.com> wrote:
>
> Set the MAX31785 device configuration properties

Andrew,

As I understand it these properties are not upstream and we have no
intention of making them so as the correct fix is to properly program
the EEPROM in the fan controller with these settings. Can you clarify
here?

>
> Signed-off-by: Matthew Barth <msbarth at linux.ibm.com>
> ---
>  arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 54 ++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index a4b77aec5424..4692c5e8f919 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -732,24 +732,78 @@ fan0: fan at 0 {
>                         compatible = "pmbus-fan";
>                         reg = <0>;
>                         tach-pulses = <2>;
> +                       maxim,fan-rotor-input = "tach";
> +                       maxim,fan-pwm-freq = <25000>;
> +                       maxim,fan-dual-tach;
> +                       maxim,fan-no-watchdog;
> +                       maxim,fan-no-fault-ramp;
> +                       maxim,fan-ramp = <2>;
> +                       maxim,fan-fault-pin-mon;
>                 };
>
>                 fan1: fan at 1 {
>                         compatible = "pmbus-fan";
>                         reg = <1>;
>                         tach-pulses = <2>;
> +                       maxim,fan-rotor-input = "tach";
> +                       maxim,fan-pwm-freq = <25000>;
> +                       maxim,fan-dual-tach;
> +                       maxim,fan-no-watchdog;
> +                       maxim,fan-no-fault-ramp;
> +                       maxim,fan-ramp = <2>;
> +                       maxim,fan-fault-pin-mon;
>                 };
>
>                 fan2: fan at 2 {
>                         compatible = "pmbus-fan";
>                         reg = <2>;
>                         tach-pulses = <2>;
> +                       maxim,fan-rotor-input = "tach";
> +                       maxim,fan-pwm-freq = <25000>;
> +                       maxim,fan-dual-tach;
> +                       maxim,fan-no-watchdog;
> +                       maxim,fan-no-fault-ramp;
> +                       maxim,fan-ramp = <2>;
> +                       maxim,fan-fault-pin-mon;
>                 };
>
>                 fan3: fan at 3 {
>                         compatible = "pmbus-fan";
>                         reg = <3>;
>                         tach-pulses = <2>;
> +                       maxim,fan-rotor-input = "tach";
> +                       maxim,fan-pwm-freq = <25000>;
> +                       maxim,fan-dual-tach;
> +                       maxim,fan-no-watchdog;
> +                       maxim,fan-no-fault-ramp;
> +                       maxim,fan-ramp = <2>;
> +                       maxim,fan-fault-pin-mon;
> +               };
> +
> +               fan4: fan at 4 {
> +                       compatible = "pmbus-fan";
> +                       reg = <4>;
> +                       tach-pulses = <2>;
> +                       maxim,fan-rotor-input = "tach";
> +                       maxim,fan-pwm-freq = <25000>;
> +                       maxim,fan-dual-tach;
> +                       maxim,fan-no-watchdog;
> +                       maxim,fan-no-fault-ramp;
> +                       maxim,fan-ramp = <2>;
> +                       maxim,fan-fault-pin-mon;
> +               };
> +
> +               fan5: fan at 5 {
> +                       compatible = "pmbus-fan";
> +                       reg = <5>;
> +                       tach-pulses = <2>;
> +                       maxim,fan-rotor-input = "tach";
> +                       maxim,fan-pwm-freq = <25000>;
> +                       maxim,fan-dual-tach;
> +                       maxim,fan-no-watchdog;
> +                       maxim,fan-no-fault-ramp;
> +                       maxim,fan-ramp = <2>;
> +                       maxim,fan-fault-pin-mon;
>                 };
>         };
>
> --
> 2.28.0
>