Boot Order in Redfish and DBUS

[Jayashree D]

Classification: Internal

Hi Artem Senichev,

Thanks for your response.

In phosphor-host-ipmid, boot mode and boot source dbus interfaces are used to get and set boot order.
I need to display the boot order sequences ( "USB_DEV", "NET_IPV6", "SATA_HDD", "SATA_CD", "Others" ) using dbus interfaces.
Is there any options to display the boot order sequences?

Regards,
Jayashree

-----Original Message-----
From: Artem Senichev <artemsen at gmail.com> 
Sent: Sunday, November 22, 2020 6:28 PM
To: Jayashree D <jayashree-d at hcl.com>
Cc: openbmc at lists.ozlabs.org
Subject: Re: Boot Order in Redfish and DBUS

[CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.]

Hi Jayashree,

AFAIK,OpenPOWER systems use dbus interface
xyz.openbmc_project.Control.Boot.Source:
https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fopenbmc%2Fphosphor-host-ipmid%2Fblob%2F515bc375cb8daaee981bae97fa7ae80e7bf65c62%2Fchassishandler.cpp%23L1720&data=04%7C01%7Cjayashree-d%40hcl.com%7C079b5b5b08e04f6145d108d88ee63ee6%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637416466936635769%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Z1hc2RbTGy04VE6G9gwf0R0OKAeP0VZd5u3DHKMtnSE%3D&reserved=0

--
Best regards,
Artem Senichev

On Sat, Nov 21, 2020 at 9:36 PM Jayashree D <jayashree-d at hcl.com> wrote:
>
> Classification: Internal
>
> Hi Team,
>
>
>
> I am working on BIOS boot order in my environment, to get and set the boot order sequence.
>
> How the boot order settings is handled using dbus interfaces and also in redfish ?
>
> Please provide your inputs/suggestions on this.
>
>
>
> Thanks,
>
> Jayashree
>
>
>
>
>
> From: Jayashree D
> Sent: Friday, November 20, 2020 2:09 PM
> To: openbmc at lists.ozlabs.org
> Subject: Boot Order in Redfish and DBUS
>
>
>
> Classification: Internal
>
> Hi Team,
>
>
>
> I am working on BIOS boot order in my environment, to get and set the boot order sequence.
>
> How the boot order settings is handled using dbus interfaces and also in redfish ?
>
> Please provide your inputs/suggestions on this.
>
>
>
> Thanks,
>
> Jayashree
>
>
>
>
>
> ::DISCLAIMER::
> ________________________________
> The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
> ________________________________