[PATCH v5 linux dev-5.8] Fii Kudo project device tree file
Joel Stanley
joel at jms.id.au
Tue Nov 17 13:14:37 AEDT 2020
.
On Tue, 17 Nov 2020 at 01:19, Vivekanand Veeracholan
<vveerach at google.com> wrote:
>
> On Mon, Nov 16, 2020 at 3:32 PM Benjamin Fair <benjaminfair at google.com> wrote:
> >
> > On Mon, 16 Nov 2020 at 15:21, Lancelot Kao <lancelot.kao at fii-usa.com> wrote:
> > >
> > > Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
> > > server platform manufactured by Fii and is based on a Nuvoton
> > > NPCM730 SoC.
> > >
> > > Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi at fii-na.com>
> > > Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai at fii-na.com>
> >
> > Reviewed-by: Benjamin Fair <benjaminfair at google.com>
> Reviewed-by: Vivekanand Veeracholan <vveerach at google.com>
Thanks for the reviews.
There was one major oversight; we missed adding a rule to the
makefile. I can do that when I apply the patch.
Thanks for the contribution Lancelot. I noticed that you don't have
your Signed-off-by. Can you respond with that and I will apply the
patch?
Next step for Nuvoton support is to add the device trees to mainline.
I have patches from Tomer ready to be merged for 5.11 that update the
7xx dtsi. We need someone to handle sending 730 dtsi, and adding the
nodes for devices that don't already exist upstream, and then we can
add the GSJ and Kudo boards. Who would like to volunteer to send those
patches out? If we get that done in the next week or two, we can get
them reviewed and merged for v5.11.
Cheers,
Joel
> >
> > >
> > > ---
> > > v2:
> > > - Remove the duplicate the full path and address of node.
> > > - modified syntax
> > >
> > > ---
> > > v3:
> > > - Modify the platform description
> > > - Merge uvoton-npcm730-kudo-gpio.dtsi to uvoton-npcm730-kudo.dts
> > > - Removed re-describe statement
> > > - move comment to above
> > >
> > > ---
> > > v4:
> > > - correct mail title
> > >
> > > ---
> > > V5:
> > > - add status = "okay" to all i2c interface
> > > - correct the spi-nor partitions and removed the bmc at 0 section
> > > ---
> > > arch/arm/boot/dts/nuvoton-npcm730-kudo.dts | 872 +++++++++++++++++++++
> > > 1 file changed, 872 insertions(+)
> > > create mode 100644 arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
> > >
> > > diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
> > > new file mode 100644
> > > index 000000000000..635353d3b068
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
> > > @@ -0,0 +1,872 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +// Copyright (c) 2020 Fii USA Inc.
> > > +
> > > +/dts-v1/;
> > > +#include "nuvoton-npcm730.dtsi"
> > > +
> > > +/ {
> > > + model = "Fii Kudo Board";
> > > + compatible = "fii,kudo", "nuvoton,npcm730";
> > > +
> > > + aliases {
> > > + ethernet0 = &emc0;
> > > + ethernet1 = &gmac0;
> > > + serial0 = &serial0;
> > > + serial1 = &serial1;
> > > + serial2 = &serial2;
> > > + serial3 = &serial3;
> > > + udc9 = &udc9;
> > > + emmc0 = &sdhci0;
> > > + vdma = &vdma;
> > > + i2c1 = &i2c1;
> > > + i2c2 = &i2c2;
> > > + i2c3 = &i2c3;
> > > + i2c4 = &i2c4;
> > > + i2c5 = &i2c5;
> > > + i2c6 = &i2c6;
> > > + i2c7 = &i2c7;
> > > + i2c8 = &i2c8;
> > > + i2c9 = &i2c9;
> > > + i2c10 = &i2c10;
> > > + i2c11 = &i2c11;
> > > + i2c12 = &i2c12;
> > > + i2c13 = &i2c13;
> > > + i2c14 = &i2c14;
> > > + i2c15 = &i2c15;
> > > + spi0 = &spi0;
> > > + spi1 = &spi1;
> > > + fiu0 = &fiu0;
> > > + fiu1 = &fiu3;
> > > + };
> > > +
> > > + chosen {
> > > + stdout-path = &serial3;
> > > + };
> > > +
> > > + memory {
> > > + reg = <0 0x40000000>;
> > > + };
> > > +
> > > + iio-hwmon {
> > > + compatible = "iio-hwmon";
> > > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> > > + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
> > > + };
> > > +
> > > + jtag_master {
> > > + compatible = "nuvoton,npcm750-jtag-master";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > +
> > > + // dev/jtag0
> > > + dev-num = <0>;
> > > + // pspi or gpio
> > > + mode = "pspi";
> > > +
> > > + // pspi2
> > > + pspi-controller = <2>;
> > > + reg = <0xf0201000 0x1000>;
> > > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&clk NPCM7XX_CLK_APB5>;
> > > +
> > > + // TCK, TDI, TDO, TMS
> > > + jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>,
> > > + <&gpio0 18 GPIO_ACTIVE_HIGH>,
> > > + <&gpio0 17 GPIO_ACTIVE_HIGH>,
> > > + <&gpio0 16 GPIO_ACTIVE_HIGH>;
> > > + };
> > > +
> > > + leds {
> > > + compatible = "gpio-leds";
> > > + heartbeat {
> > > + label = "heartbeat";
> > > + gpios = <&gpio0 14 1>;
> > > + };
> > > + };
> > > +
> > > + pinctrl: pinctrl at f0800000 {
> > > + gpio61oh_pins: gpio61oh-pins {
> > > + pins = "GPO61/nDTR1_BOUT1/STRAP6";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio62oh_pins: gpio62oh-pins {
> > > + pins = "GPO62/nRTST1/STRAP5";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio161ol_pins: gpio161ol-pins {
> > > + pins = "GPIO161/nLFRAME/nESPICS";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio163i_pins: gpio163i-pins {
> > > + pins = "GPIO163/LCLK/ESPICLK";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio167ol_pins: gpio167ol-pins {
> > > + pins = "GPIO167/LAD3/ESPI_IO3";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio95i_pins: gpio95i-pins {
> > > + pins = "GPIO95/nLRESET/nESPIRST";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio65ol_pins: gpio65ol-pins {
> > > + pins = "GPIO65/FANIN1";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio66oh_pins: gpio66oh-pins {
> > > + pins = "GPIO66/FANIN2";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio67oh_pins: gpio67oh-pins {
> > > + pins = "GPIO67/FANIN3";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio68ol_pins: gpio68ol-pins {
> > > + pins = "GPIO68/FANIN4";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio69i_pins: gpio69i-pins {
> > > + pins = "GPIO69/FANIN5";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio70ol_pins: gpio70ol-pins {
> > > + pins = "GPIO70/FANIN6";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio71i_pins: gpio71i-pins {
> > > + pins = "GPIO71/FANIN7";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio72i_pins: gpio72i-pins {
> > > + pins = "GPIO72/FANIN8";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio73i_pins: gpio73i-pins {
> > > + pins = "GPIO73/FANIN9";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio74i_pins: gpio74i-pins {
> > > + pins = "GPIO74/FANIN10";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio75i_pins: gpio75i-pins {
> > > + pins = "GPIO75/FANIN11";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio76i_pins: gpio76i-pins {
> > > + pins = "GPIO76/FANIN12";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio77i_pins: gpio77i-pins {
> > > + pins = "GPIO77/FANIN13";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio78i_pins: gpio78i-pins {
> > > + pins = "GPIO78/FANIN14";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio79ol_pins: gpio79ol-pins {
> > > + pins = "GPIO79/FANIN15";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio80oh_pins: gpio80oh-pins {
> > > + pins = "GPIO80/PWM0";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio81i_pins: gpio81i-pins {
> > > + pins = "GPIO81/PWM1";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio82i_pins: gpio82i-pins {
> > > + pins = "GPIO82/PWM2";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio83i_pins: gpio83i-pins {
> > > + pins = "GPIO83/PWM3";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio144i_pins: gpio144i-pins {
> > > + pins = "GPIO144/PWM4";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio145i_pins: gpio145i-pins {
> > > + pins = "GPIO145/PWM5";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio146i_pins: gpio146i-pins {
> > > + pins = "GPIO146/PWM6";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio147oh_pins: gpio147oh-pins {
> > > + pins = "GPIO147/PWM7";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio168ol_pins: gpio168ol-pins {
> > > + pins = "GPIO168/nCLKRUN/nESPIALERT";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio169oh_pins: gpio169oh-pins {
> > > + pins = "GPIO169/nSCIPME";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio170ol_pins: gpio170ol-pins {
> > > + pins = "GPIO170/nSMI";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio218oh_pins: gpio218oh-pins {
> > > + pins = "GPIO218/nWDO1";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio37i_pins: gpio37i-pins {
> > > + pins = "GPIO37/SMB3CSDA";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio38i_pins: gpio38i-pins {
> > > + pins = "GPIO38/SMB3CSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio39i_pins: gpio39i-pins {
> > > + pins = "GPIO39/SMB3BSDA";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio40i_pins: gpio40i-pins {
> > > + pins = "GPIO40/SMB3BSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio121i_pins: gpio121i-pins {
> > > + pins = "GPIO121/SMB2CSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio122i_pins: gpio122i-pins {
> > > + pins = "GPIO122/SMB2BSDA";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio123i_pins: gpio123i-pins {
> > > + pins = "GPIO123/SMB2BSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio124i_pins: gpio124i-pins {
> > > + pins = "GPIO124/SMB1CSDA";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio125i_pins: gpio125i-pins {
> > > + pins = "GPIO125/SMB1CSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio126i_pins: gpio126i-pins {
> > > + pins = "GPIO126/SMB1BSDA";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio127i_pins: gpio127i-pins {
> > > + pins = "GPIO127/SMB1BSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio136i_pins: gpio136i-pins {
> > > + pins = "GPIO136/SD1DT0";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio137oh_pins: gpio137oh-pins {
> > > + pins = "GPIO137/SD1DT1";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio138i_pins: gpio138i-pins {
> > > + pins = "GPIO138/SD1DT2";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio139i_pins: gpio139i-pins {
> > > + pins = "GPIO139/SD1DT3";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio140i_pins: gpio140i-pins {
> > > + pins = "GPIO140/SD1CLK";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio141i_pins: gpio141i-pins {
> > > + pins = "GPIO141/SD1WP";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio190oh_pins: gpio190oh-pins {
> > > + pins = "GPIO190/nPRD_SMI";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio191oh_pins: gpio191oh-pins {
> > > + pins = "GPIO191";
> > > + bias-disable;
> > > + output-high;
> > > + };
> > > + gpio195ol_pins: gpio195ol-pins {
> > > + pins = "GPIO195/SMB0BSDA";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio196ol_pins: gpio196ol-pins {
> > > + pins = "GPIO196/SMB0CSCL";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + gpio199i_pins: gpio199i-pins {
> > > + pins = "GPIO199/SMB0DSCL";
> > > + bias-disable;
> > > + input-enable;
> > > + };
> > > + gpio202ol_pins: gpio202ol-pins {
> > > + pins = "GPIO202/SMB0CSDA";
> > > + bias-disable;
> > > + output-low;
> > > + };
> > > + };
> > > +};
> > > +
> > > +&gmac0 {
> > > + phy-mode = "rgmii-id";
> > > + snps,eee-force-disable;
> > > + status = "okay";
> > > +};
> > > +
> > > +&emc0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&ehci1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&ohci1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&udc9 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&aes {
> > > + status = "okay";
> > > +};
> > > +
> > > +&sha {
> > > + status = "okay";
> > > +};
> > > +
> > > +&fiu0 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&spi0cs1_pins>;
> > > + status = "okay";
> > > + spi-nor at 0 {
> > > + compatible = "jedec,spi-nor";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + reg = <0>;
> > > + spi-max-frequency = <5000000>;
> > > + spi-rx-bus-width = <2>;
> > > + label = "bmc";
> > > + partitions at 80000000 {
> > > + compatible = "fixed-partitions";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + u-boot at 0 {
> > > + label = "u-boot";
> > > + reg = <0x0000000 0xC0000>;
> > > + read-only;
> > > + };
> > > + u-boot-env at 100000{
> > > + label = "u-boot-env";
> > > + reg = <0x00100000 0x40000>;
> > > + };
> > > + kernel at 200000 {
> > > + label = "kernel";
> > > + reg = <0x0200000 0x600000>;
> > > + };
> > > + rofs at 800000 {
> > > + label = "rofs";
> > > + reg = <0x800000 0x3500000>;
> > > + };
> > > + rwfs at 3d00000 {
> > > + label = "rwfs";
> > > + reg = <0x3d00000 0x300000>;
> > > + };
> > > + };
> > > + };
> > > + spi-nor at 1 {
> > > + compatible = "jedec,spi-nor";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + reg = <1>;
> > > + spi-max-frequency = <5000000>;
> > > + spi-rx-bus-width = <2>;
> > > + partitions at 88000000 {
> > > + compatible = "fixed-partitions";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + spare1 at 0 {
> > > + label = "spi0-cs1-spare1";
> > > + reg = <0x0 0x800000>;
> > > + };
> > > + spare2 at 800000 {
> > > + label = "spi0-cs1-spare2";
> > > + reg = <0x800000 0x0>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&fiu3 {
> > > + pinctrl-0 = <&spi3_pins>;
> > > + spi-nor at 0 {
> > > + compatible = "jedec,spi-nor";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + reg = <0>;
> > > + spi-max-frequency = <5000000>;
> > > + spi-rx-bus-width = <2>;
> > > + partitions at A0000000 {
> > > + compatible = "fixed-partitions";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + system1 at 0 {
> > > + label = "bios";
> > > + reg = <0x0 0x0>;
> > > + };
> > > + system2 at 800000 {
> > > + label = "spi3-system2";
> > > + reg = <0x800000 0x0>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&sdhci0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vdma {
> > > + status = "okay";
> > > +};
> > > +
> > > +&pcimbox {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vcd {
> > > + status = "okay";
> > > +};
> > > +
> > > +&ece {
> > > + status = "okay";
> > > +};
> > > +
> > > +&watchdog1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&rng {
> > > + status = "okay";
> > > +};
> > > +
> > > +&serial0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&serial1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&serial2 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&serial3 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&adc {
> > > + #io-channel-cells = <1>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&otp {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c1 {
> > > + status = "okay";
> > > + i2c-switch at 75 {
> > > + compatible = "nxp,pca9548";
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0x75>;
> > > + i2c-mux-idle-disconnect;
> > > +
> > > + i2c at 2 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <2>;
> > > +
> > > + // Rear-Fan
> > > + max31790 at 58 {
> > > + compatible = "maxim,max31790";
> > > + reg = <0x58>;
> > > + };
> > > + };
> > > +
> > > + i2c at 3 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <3>;
> > > +
> > > + // Mid-Fan
> > > + max31790 at 58 {
> > > + compatible = "maxim,max31790";
> > > + reg = <0x58>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 4 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <4>;
> > > +
> > > + // INLET1_T
> > > + lm75 at 5c {
> > > + compatible = "ti,lm75";
> > > + reg = <0x5c>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 5 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <5>;
> > > +
> > > + // OUTLET1_T
> > > + lm75 at 5c {
> > > + compatible = "ti,lm75";
> > > + reg = <0x5c>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 6 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <6>;
> > > +
> > > + // OUTLET2_T
> > > + lm75 at 5c {
> > > + compatible = "ti,lm75";
> > > + reg = <0x5c>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 7 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <7>;
> > > +
> > > + // OUTLET3_T
> > > + lm75 at 5c {
> > > + compatible = "ti,lm75";
> > > + reg = <0x5c>;
> > > + };
> > > + };
> > > + };
> > > + i2c-switch at 77 {
> > > + compatible = "nxp,pca9548";
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0x77>;
> > > + i2c-mux-idle-disconnect;
> > > +
> > > + i2c-bus at 2 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <2>;
> > > +
> > > + // STB-T
> > > + pmbus at 74 {
> > > + compatible = "pmbus";
> > > + reg = <0x74>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&i2c2 {
> > > + status = "okay";
> > > + smpro at 4f {
> > > + compatible = "ampere,smpro";
> > > + reg = <0x4f>;
> > > + };
> > > +
> > > + smpro at 4e {
> > > + compatible = "ampere,smpro";
> > > + reg = <0x4e>;
> > > + };
> > > +};
> > > +
> > > +&i2c3 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c4 {
> > > + status = "okay";
> > > + i2c-switch at 77 {
> > > + compatible = "nxp,pca9548";
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0x77>;
> > > + i2c-mux-idle-disconnect;
> > > +
> > > + i2c-bus at 0 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0>;
> > > +
> > > + // ADC sensors
> > > + adm1266 at 40 {
> > > + compatible = "adi,adm1266";
> > > + reg = <0x40>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 1 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <1>;
> > > +
> > > + // ADC sensors
> > > + adm1266 at 41 {
> > > + compatible = "adi,adm1266";
> > > + reg = <0x41>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&i2c5 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c6 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c7 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c8 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c9 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c10 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c11 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c12 {
> > > + status = "okay";
> > > + ssif-bmc at 10 {
> > > + compatible = "ssif-bmc";
> > > + reg = <0x10>;
> > > + };
> > > +};
> > > +
> > > +&i2c13 {
> > > + status = "okay";
> > > + i2c-switch at 77 {
> > > + compatible = "nxp,pca9548";
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0x77>;
> > > + i2c-mux-idle-disconnect;
> > > +
> > > + i2c-bus at 3 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <3>;
> > > +
> > > + // M2_ZONE_T
> > > + lm75 at 28 {
> > > + compatible = "ti,lm75";
> > > + reg = <0x28>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 4 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <4>;
> > > +
> > > + // BATT_ZONE_T
> > > + lm75 at 29 {
> > > + compatible = "ti,lm75";
> > > + reg = <0x29>;
> > > + };
> > > + };
> > > +
> > > + i2c-bus at 5 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <5>;
> > > +
> > > + // NBM1_ZONE_T
> > > + lm75 at 28 {
> > > + compatible = "ti,lm75";
> > > + reg = <0x28>;
> > > + };
> > > + };
> > > + i2c-bus at 6 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <6>;
> > > +
> > > + // NBM2_ZONE_T
> > > + lm75 at 29 {
> > > + compatible = "ti,lm75";
> > > + reg = <0x29>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&i2c14 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c15 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&spi0 {
> > > + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&pinctrl {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <
> > > + &gpio61oh_pins
> > > + &gpio62oh_pins
> > > + &gpio161ol_pins
> > > + &gpio163i_pins
> > > + &gpio167ol_pins
> > > + &gpio95i_pins
> > > + &gpio65ol_pins
> > > + &gpio66oh_pins
> > > + &gpio67oh_pins
> > > + &gpio68ol_pins
> > > + &gpio69i_pins
> > > + &gpio70ol_pins
> > > + &gpio71i_pins
> > > + &gpio72i_pins
> > > + &gpio73i_pins
> > > + &gpio74i_pins
> > > + &gpio75i_pins
> > > + &gpio76i_pins
> > > + &gpio77i_pins
> > > + &gpio78i_pins
> > > + &gpio79ol_pins
> > > + &gpio80oh_pins
> > > + &gpio81i_pins
> > > + &gpio82i_pins
> > > + &gpio83i_pins
> > > + &gpio144i_pins
> > > + &gpio145i_pins
> > > + &gpio146i_pins
> > > + &gpio147oh_pins
> > > + &gpio168ol_pins
> > > + &gpio169oh_pins
> > > + &gpio170ol_pins
> > > + &gpio218oh_pins
> > > + &gpio37i_pins
> > > + &gpio38i_pins
> > > + &gpio39i_pins
> > > + &gpio40i_pins
> > > + &gpio121i_pins
> > > + &gpio122i_pins
> > > + &gpio123i_pins
> > > + &gpio124i_pins
> > > + &gpio125i_pins
> > > + &gpio126i_pins
> > > + &gpio127i_pins
> > > + &gpio136i_pins
> > > + &gpio137oh_pins
> > > + &gpio138i_pins
> > > + &gpio139i_pins
> > > + &gpio140i_pins
> > > + &gpio141i_pins
> > > + &gpio190oh_pins
> > > + &gpio191oh_pins
> > > + &gpio195ol_pins
> > > + &gpio196ol_pins
> > > + &gpio199i_pins
> > > + &gpio202ol_pins
> > > + >;
> > > +};
> > > +
> > > +&gcr {
> > > + serial_port_mux: mux-controller {
> > > + compatible = "mmio-mux";
> > > + #mux-control-cells = <1>;
> > > +
> > > + mux-reg-masks = <0x38 0x07>;
> > > + idle-states = <2>;
> > > + };
> > > +};
> > > --
> > > 2.17.1
> > >
More information about the openbmc
mailing list