About FRU

[Vijay Khemka]

Hi Harley,
What approach you are using to read FRU as there are couple of fru implementation  like phosphor-fru and entity manager approach. Once you have fru reading via any of these application then only ipmi tool will be able to read and print.

Regards
-Vijay

From: openbmc <openbmc-bounces+vijaykhemka=fb.com at lists.ozlabs.org> on behalf of 周 远清 <zhouyuanqing8 at outlook.com>
Date: Monday, May 25, 2020 at 6:31 AM
To: OpenBMC Maillist <openbmc at lists.ozlabs.org>, "uperic at 163.com" <uperic at 163.com>
Subject: About FRU


Hello everyone,

       My motherboard has an EEPROM device to store FRU related information. How can I configure it in the openbmc configuration file to see this FRU information through the ipmitool fru print command?

Are there some examples to provide reference, I did not find a place to configure the eeprom device in the openbmc project?

Is there any documentation about FRU indicating that the module reads and parses information from eeprom, and then it can be read by the ipmitool fru print command? What is the process like?

Thanks
Harley

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200526/b30c200a/attachment-0001.htm>